From: Jan Kara <jack@suse.cz>
To: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>, Song Liu <song@kernel.org>,
Hans de Goede <hdegoede@redhat.com>,
Richard Weinberger <richard@nod.at>,
Minchan Kim <minchan@kernel.org>,
linux-mtd@lists.infradead.org, dm-devel@redhat.com,
linux-block@vger.kernel.org, linux-kernel@vger.kernel.org,
drbd-dev@lists.linbit.com, linux-raid@vger.kernel.org,
linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
cgroups@vger.kernel.org
Subject: Re: [PATCH 08/12] bdi: remove BDI_CAP_SYNCHRONOUS_IO
Date: Thu, 17 Sep 2020 11:36:14 +0200 [thread overview]
Message-ID: <20200917093614.GF7347@quack2.suse.cz> (raw)
In-Reply-To: <20200910144833.742260-9-hch@lst.de>
On Thu 10-09-20 16:48:28, Christoph Hellwig wrote:
> BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to
> decided if ->rw_page can be used on a block device. Just check up for
> the method instead. The only complication is that zram needs a second
> set of block_device_operations as it can switch between modes that
> actually support ->rw_page and those who don't.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
The patch looks good to me. You can add:
Reviewed-by: Jan Kara <jack@suse.cz>
Honza
> ---
> drivers/block/brd.c | 1 -
> drivers/block/zram/zram_drv.c | 19 +++++++++++++------
> drivers/nvdimm/btt.c | 2 --
> drivers/nvdimm/pmem.c | 1 -
> include/linux/backing-dev.h | 9 ---------
> mm/swapfile.c | 2 +-
> 6 files changed, 14 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/block/brd.c b/drivers/block/brd.c
> index 2723a70eb85593..cc49a921339f77 100644
> --- a/drivers/block/brd.c
> +++ b/drivers/block/brd.c
> @@ -403,7 +403,6 @@ static struct brd_device *brd_alloc(int i)
> disk->flags = GENHD_FL_EXT_DEVT;
> sprintf(disk->disk_name, "ram%d", i);
> set_capacity(disk, rd_size * 2);
> - brd->brd_queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
>
> /* Tell the block layer that this is not a rotational device */
> blk_queue_flag_set(QUEUE_FLAG_NONROT, brd->brd_queue);
> diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> index a356275605b104..1b51bb664f91f5 100644
> --- a/drivers/block/zram/zram_drv.c
> +++ b/drivers/block/zram/zram_drv.c
> @@ -52,6 +52,9 @@ static unsigned int num_devices = 1;
> */
> static size_t huge_class_size;
>
> +static const struct block_device_operations zram_devops;
> +static const struct block_device_operations zram_wb_devops;
> +
> static void zram_free_page(struct zram *zram, size_t index);
> static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
> u32 index, int offset, struct bio *bio);
> @@ -408,8 +411,7 @@ static void reset_bdev(struct zram *zram)
> zram->backing_dev = NULL;
> zram->old_block_size = 0;
> zram->bdev = NULL;
> - zram->disk->queue->backing_dev_info->capabilities |=
> - BDI_CAP_SYNCHRONOUS_IO;
> + zram->disk->fops = &zram_devops;
> kvfree(zram->bitmap);
> zram->bitmap = NULL;
> }
> @@ -528,8 +530,7 @@ static ssize_t backing_dev_store(struct device *dev,
> * freely but in fact, IO is going on so finally could cause
> * use-after-free when the IO is really done.
> */
> - zram->disk->queue->backing_dev_info->capabilities &=
> - ~BDI_CAP_SYNCHRONOUS_IO;
> + zram->disk->fops = &zram_wb_devops;
> up_write(&zram->init_lock);
>
> pr_info("setup backing device %s\n", file_name);
> @@ -1819,6 +1820,13 @@ static const struct block_device_operations zram_devops = {
> .owner = THIS_MODULE
> };
>
> +static const struct block_device_operations zram_wb_devops = {
> + .open = zram_open,
> + .submit_bio = zram_submit_bio,
> + .swap_slot_free_notify = zram_slot_free_notify,
> + .owner = THIS_MODULE
> +};
> +
> static DEVICE_ATTR_WO(compact);
> static DEVICE_ATTR_RW(disksize);
> static DEVICE_ATTR_RO(initstate);
> @@ -1946,8 +1954,7 @@ static int zram_add(void)
> if (ZRAM_LOGICAL_BLOCK_SIZE == PAGE_SIZE)
> blk_queue_max_write_zeroes_sectors(zram->disk->queue, UINT_MAX);
>
> - zram->disk->queue->backing_dev_info->capabilities |=
> - (BDI_CAP_STABLE_WRITES | BDI_CAP_SYNCHRONOUS_IO);
> + zram->disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES;
> device_add_disk(NULL, zram->disk, zram_disk_attr_groups);
>
> strlcpy(zram->compressor, default_compressor, sizeof(zram->compressor));
> diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
> index 0d710140bf93be..12ff6f8784ac11 100644
> --- a/drivers/nvdimm/btt.c
> +++ b/drivers/nvdimm/btt.c
> @@ -1537,8 +1537,6 @@ static int btt_blk_init(struct btt *btt)
> btt->btt_disk->private_data = btt;
> btt->btt_disk->queue = btt->btt_queue;
> btt->btt_disk->flags = GENHD_FL_EXT_DEVT;
> - btt->btt_disk->queue->backing_dev_info->capabilities |=
> - BDI_CAP_SYNCHRONOUS_IO;
>
> blk_queue_logical_block_size(btt->btt_queue, btt->sector_size);
> blk_queue_max_hw_sectors(btt->btt_queue, UINT_MAX);
> diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
> index 140cf3b9000c60..1711fdfd8d2816 100644
> --- a/drivers/nvdimm/pmem.c
> +++ b/drivers/nvdimm/pmem.c
> @@ -475,7 +475,6 @@ static int pmem_attach_disk(struct device *dev,
> disk->queue = q;
> disk->flags = GENHD_FL_EXT_DEVT;
> disk->private_data = pmem;
> - disk->queue->backing_dev_info->capabilities |= BDI_CAP_SYNCHRONOUS_IO;
> nvdimm_namespace_disk_name(ndns, disk->disk_name);
> set_capacity(disk, (pmem->size - pmem->pfn_pad - pmem->data_offset)
> / 512);
> diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
> index 52583b6f2ea05d..860ea33571bce5 100644
> --- a/include/linux/backing-dev.h
> +++ b/include/linux/backing-dev.h
> @@ -122,9 +122,6 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
> * BDI_CAP_NO_WRITEBACK: Don't write pages back
> * BDI_CAP_NO_ACCT_WB: Don't automatically account writeback pages
> * BDI_CAP_STRICTLIMIT: Keep number of dirty pages below bdi threshold.
> - *
> - * BDI_CAP_SYNCHRONOUS_IO: Device is so fast that asynchronous IO would be
> - * inefficient.
> */
> #define BDI_CAP_NO_ACCT_DIRTY 0x00000001
> #define BDI_CAP_NO_WRITEBACK 0x00000002
> @@ -132,7 +129,6 @@ int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
> #define BDI_CAP_STABLE_WRITES 0x00000008
> #define BDI_CAP_STRICTLIMIT 0x00000010
> #define BDI_CAP_CGROUP_WRITEBACK 0x00000020
> -#define BDI_CAP_SYNCHRONOUS_IO 0x00000040
>
> #define BDI_CAP_NO_ACCT_AND_WRITEBACK \
> (BDI_CAP_NO_WRITEBACK | BDI_CAP_NO_ACCT_DIRTY | BDI_CAP_NO_ACCT_WB)
> @@ -174,11 +170,6 @@ static inline int wb_congested(struct bdi_writeback *wb, int cong_bits)
> long congestion_wait(int sync, long timeout);
> long wait_iff_congested(int sync, long timeout);
>
> -static inline bool bdi_cap_synchronous_io(struct backing_dev_info *bdi)
> -{
> - return bdi->capabilities & BDI_CAP_SYNCHRONOUS_IO;
> -}
> -
> static inline bool bdi_cap_stable_pages_required(struct backing_dev_info *bdi)
> {
> return bdi->capabilities & BDI_CAP_STABLE_WRITES;
> diff --git a/mm/swapfile.c b/mm/swapfile.c
> index 12f59e641b5e29..986fe5aad30e18 100644
> --- a/mm/swapfile.c
> +++ b/mm/swapfile.c
> @@ -3237,7 +3237,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
> if (bdi_cap_stable_pages_required(inode_to_bdi(inode)))
> p->flags |= SWP_STABLE_WRITES;
>
> - if (bdi_cap_synchronous_io(inode_to_bdi(inode)))
> + if (p->bdev && p->bdev->bd_disk->fops->rw_page)
> p->flags |= SWP_SYNCHRONOUS_IO;
>
> if (p->bdev && blk_queue_nonrot(bdev_get_queue(p->bdev))) {
> --
> 2.28.0
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
next prev parent reply other threads:[~2020-09-17 9:36 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-10 14:48 bdi cleanups v4 Christoph Hellwig
2020-09-10 14:48 ` [PATCH 01/12] fs: remove the unused SB_I_MULTIROOT flag Christoph Hellwig
2020-09-17 9:41 ` Jan Kara
2020-09-10 14:48 ` [PATCH 02/12] drbd: remove dead code in device_to_statistics Christoph Hellwig
2020-09-17 9:46 ` Jan Kara
2020-09-10 14:48 ` [PATCH 03/12] drbd: remove RB_CONGESTED_REMOTE Christoph Hellwig
2020-09-17 9:55 ` Jan Kara
2020-09-19 6:58 ` Christoph Hellwig
2020-09-10 14:48 ` [PATCH 04/12] bdi: initialize ->ra_pages and ->io_pages in bdi_init Christoph Hellwig
2020-09-17 10:04 ` Jan Kara
2020-09-19 7:01 ` Christoph Hellwig
2020-09-10 14:48 ` [PATCH 05/12] md: update the optimal I/O size on reshape Christoph Hellwig
2020-09-12 6:17 ` Song Liu
2020-09-10 14:48 ` [PATCH 06/12] block: lift setting the readahead size into the block layer Christoph Hellwig
2020-09-17 10:35 ` Jan Kara
2020-09-19 7:31 ` Christoph Hellwig
2020-09-10 14:48 ` [PATCH 07/12] bdi: remove BDI_CAP_CGROUP_WRITEBACK Christoph Hellwig
2020-09-16 9:28 ` David Sterba
2020-09-17 9:36 ` Jan Kara
2020-09-10 14:48 ` [PATCH 08/12] bdi: remove BDI_CAP_SYNCHRONOUS_IO Christoph Hellwig
2020-09-17 9:36 ` Jan Kara [this message]
2020-09-10 14:48 ` [PATCH 09/12] mm: use SWP_SYNCHRONOUS_IO more intelligently Christoph Hellwig
2020-09-17 9:06 ` Jan Kara
2020-09-10 14:48 ` [PATCH 10/12] bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag Christoph Hellwig
2020-09-17 9:25 ` Jan Kara
2020-09-19 6:51 ` Christoph Hellwig
2020-09-10 14:48 ` [PATCH 11/12] bdi: invert BDI_CAP_NO_ACCT_WB Christoph Hellwig
2020-09-17 9:27 ` Jan Kara
2020-09-10 14:48 ` [PATCH 12/12] bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag Christoph Hellwig
2020-09-17 9:31 ` Jan Kara
2020-09-15 15:18 bdi cleanups v5 Christoph Hellwig
2020-09-15 15:18 ` [PATCH 08/12] bdi: remove BDI_CAP_SYNCHRONOUS_IO Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200917093614.GF7347@quack2.suse.cz \
--to=jack@suse.cz \
--cc=axboe@kernel.dk \
--cc=cgroups@vger.kernel.org \
--cc=dm-devel@redhat.com \
--cc=drbd-dev@lists.linbit.com \
--cc=hch@lst.de \
--cc=hdegoede@redhat.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-raid@vger.kernel.org \
--cc=minchan@kernel.org \
--cc=richard@nod.at \
--cc=song@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).