[PATCH for-next 7/7] RDMA/hns: Fix the unneeded process when getting a general type of CQE error

[Weihang Li <liweihang@huawei.com>]

From: Xi Wang <wangxi11@huawei.com>

If the hns ROCEE reports a general error CQE (types not specified by the IB
General Specifications), it's no need to change the QP state to error, and
the driver should just skip it.

Fixes: 7c044adca272 ("RDMA/hns: Simplify the cqe code of poll cq")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 9 +++++++++
 drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 1 +
 2 files changed, 10 insertions(+)

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index d6acde5..a0a0427 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -3046,6 +3046,7 @@ static void get_cqe_status(struct hns_roce_dev *hr_dev, struct hns_roce_qp *qp,
 		  IB_WC_RETRY_EXC_ERR },
 		{ HNS_ROCE_CQE_V2_RNR_RETRY_EXC_ERR, IB_WC_RNR_RETRY_EXC_ERR },
 		{ HNS_ROCE_CQE_V2_REMOTE_ABORT_ERR, IB_WC_REM_ABORT_ERR },
+		{ HNS_ROCE_CQE_V2_GENERAL_ERR, IB_WC_GENERAL_ERR}
 	};
 
 	u32 cqe_status = roce_get_field(cqe->byte_4, V2_CQE_BYTE_4_STATUS_M,
@@ -3068,6 +3069,14 @@ static void get_cqe_status(struct hns_roce_dev *hr_dev, struct hns_roce_qp *qp,
 		       sizeof(*cqe), false);
 
 	/*
+	 * For hns ROCEE, GENERAL_ERR is an error type that is not defined in
+	 * the standard protocol, the driver must ignore it and needn't to set
+	 * the QP to an error state.
+	 */
+	if (cqe_status == HNS_ROCE_CQE_V2_GENERAL_ERR)
+		return;
+
+	/*
 	 * Hip08 hardware cannot flush the WQEs in SQ/RQ if the QP state gets
 	 * into errored mode. Hence, as a workaround to this hardware
 	 * limitation, driver needs to assist in flushing. But the flushing
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
index 53c26f3..1fb1c58 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
@@ -214,6 +214,7 @@ enum {
 	HNS_ROCE_CQE_V2_TRANSPORT_RETRY_EXC_ERR		= 0x15,
 	HNS_ROCE_CQE_V2_RNR_RETRY_EXC_ERR		= 0x16,
 	HNS_ROCE_CQE_V2_REMOTE_ABORT_ERR		= 0x22,
+	HNS_ROCE_CQE_V2_GENERAL_ERR			= 0x23,
 
 	HNS_ROCE_V2_CQE_STATUS_MASK			= 0xff,
 };
-- 
2.8.1