linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gal Pressman <galpress@amazon.com>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-rdma@vger.kernel.org>,
	Daniel Kranzdorf <dkkranzd@amazon.com>,
	Yossi Leybovich <sleybo@amazon.com>,
	Gal Pressman <galpress@amazon.com>
Subject: [PATCH for-next 3/4] RDMA/efa: Support remote read access in MR registration
Date: Tue, 10 Sep 2019 14:43:00 +0100	[thread overview]
Message-ID: <20190910134301.4194-4-galpress@amazon.com> (raw)
In-Reply-To: <20190910134301.4194-1-galpress@amazon.com>

From: Daniel Kranzdorf <dkkranzd@amazon.com>

Enable remote read access for memory regions in order to support RDMA
operations.

Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
---
 drivers/infiniband/hw/efa/efa_admin_cmds_defs.h | 12 +++++++++---
 drivers/infiniband/hw/efa/efa_com_cmd.c         |  3 +--
 drivers/infiniband/hw/efa/efa_com_cmd.h         |  7 +------
 drivers/infiniband/hw/efa/efa_verbs.c           |  5 +++--
 4 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/infiniband/hw/efa/efa_admin_cmds_defs.h b/drivers/infiniband/hw/efa/efa_admin_cmds_defs.h
index 2be0469d545f..7fa9d532db61 100644
--- a/drivers/infiniband/hw/efa/efa_admin_cmds_defs.h
+++ b/drivers/infiniband/hw/efa/efa_admin_cmds_defs.h
@@ -362,9 +362,13 @@ struct efa_admin_reg_mr_cmd {
 
 	/*
 	 * permissions
-	 * 0 : local_write_enable - Write permissions: value
-	 *    of 1 needed for RQ buffers and for RDMA write
-	 * 7:1 : reserved1 - remote access flags, etc
+	 * 0 : local_write_enable - Local write permissions:
+	 *    must be set for RQ buffers and buffers posted for
+	 *    RDMA Read requests
+	 * 1 : reserved1 - MBZ
+	 * 2 : remote_read_enable - Remote read permissions:
+	 *    must be set to enable RDMA read from the region
+	 * 7:3 : reserved2 - MBZ
 	 */
 	u8 permissions;
 
@@ -780,6 +784,8 @@ struct efa_admin_mmio_req_read_less_resp {
 #define EFA_ADMIN_REG_MR_CMD_MEM_ADDR_PHY_MODE_EN_SHIFT     7
 #define EFA_ADMIN_REG_MR_CMD_MEM_ADDR_PHY_MODE_EN_MASK      BIT(7)
 #define EFA_ADMIN_REG_MR_CMD_LOCAL_WRITE_ENABLE_MASK        BIT(0)
+#define EFA_ADMIN_REG_MR_CMD_REMOTE_READ_ENABLE_SHIFT       2
+#define EFA_ADMIN_REG_MR_CMD_REMOTE_READ_ENABLE_MASK        BIT(2)
 
 /* create_cq_cmd */
 #define EFA_ADMIN_CREATE_CQ_CMD_INTERRUPT_MODE_ENABLED_SHIFT 5
diff --git a/drivers/infiniband/hw/efa/efa_com_cmd.c b/drivers/infiniband/hw/efa/efa_com_cmd.c
index 4713c2756ad3..520c9d920f9e 100644
--- a/drivers/infiniband/hw/efa/efa_com_cmd.c
+++ b/drivers/infiniband/hw/efa/efa_com_cmd.c
@@ -230,8 +230,7 @@ int efa_com_register_mr(struct efa_com_dev *edev,
 	mr_cmd.flags |= params->page_shift &
 		EFA_ADMIN_REG_MR_CMD_PHYS_PAGE_SIZE_SHIFT_MASK;
 	mr_cmd.iova = params->iova;
-	mr_cmd.permissions |= params->permissions &
-			      EFA_ADMIN_REG_MR_CMD_LOCAL_WRITE_ENABLE_MASK;
+	mr_cmd.permissions = params->permissions;
 
 	if (params->inline_pbl) {
 		memcpy(mr_cmd.pbl.inline_pbl_array,
diff --git a/drivers/infiniband/hw/efa/efa_com_cmd.h b/drivers/infiniband/hw/efa/efa_com_cmd.h
index 6134d13ecc6f..d119186c41d0 100644
--- a/drivers/infiniband/hw/efa/efa_com_cmd.h
+++ b/drivers/infiniband/hw/efa/efa_com_cmd.h
@@ -178,12 +178,7 @@ struct efa_com_reg_mr_params {
 	 * address mapping
 	 */
 	u8 page_shift;
-	/*
-	 * permissions
-	 * 0: local_write_enable - Write permissions: value of 1 needed
-	 * for RQ buffers and for RDMA write:1: reserved1 - remote
-	 * access flags, etc
-	 */
+	/* see permissions field of struct efa_admin_reg_mr_cmd */
 	u8 permissions;
 	u8 inline_pbl;
 	u8 indirect;
diff --git a/drivers/infiniband/hw/efa/efa_verbs.c b/drivers/infiniband/hw/efa/efa_verbs.c
index fe79351334f3..0011e2c1c8a6 100644
--- a/drivers/infiniband/hw/efa/efa_verbs.c
+++ b/drivers/infiniband/hw/efa/efa_verbs.c
@@ -82,7 +82,8 @@ static const char *const efa_stats_names[] = {
 #define EFA_CHUNK_USED_SIZE \
 	((EFA_PTRS_PER_CHUNK * EFA_CHUNK_PAYLOAD_PTR_SIZE) + EFA_CHUNK_PTR_SIZE)
 
-#define EFA_SUPPORTED_ACCESS_FLAGS IB_ACCESS_LOCAL_WRITE
+#define EFA_SUPPORTED_ACCESS_FLAGS \
+	(IB_ACCESS_LOCAL_WRITE | IB_ACCESS_REMOTE_READ)
 
 struct pbl_chunk {
 	dma_addr_t dma_addr;
@@ -1434,7 +1435,7 @@ struct ib_mr *efa_reg_mr(struct ib_pd *ibpd, u64 start, u64 length,
 	params.pd = to_epd(ibpd)->pdn;
 	params.iova = virt_addr;
 	params.mr_length_in_bytes = length;
-	params.permissions = access_flags & 0x1;
+	params.permissions = access_flags;
 
 	pg_sz = ib_umem_find_best_pgsz(mr->umem,
 				       dev->dev_attr.page_size_cap,
-- 
2.23.0


  parent reply	other threads:[~2019-09-10 13:43 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-10 13:42 [PATCH for-next 0/4] EFA RDMA read support Gal Pressman
2019-09-10 13:42 ` [PATCH for-next 1/4] RDMA/efa: Fix incorrect error print Gal Pressman
2019-09-16 17:37   ` Jason Gunthorpe
2019-09-10 13:42 ` [PATCH for-next 2/4] RDMA/efa: Store network attributes in device attributes Gal Pressman
2019-09-10 13:43 ` Gal Pressman [this message]
2019-09-10 13:43 ` [PATCH for-next 4/4] RDMA/efa: Expose RDMA read related attributes Gal Pressman
2019-10-20  7:03 ` [PATCH for-next 0/4] EFA RDMA read support Gal Pressman
2019-10-21 17:31   ` Jason Gunthorpe
2019-10-23  9:55     ` Gal Pressman
2019-10-23 14:35       ` Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190910134301.4194-4-galpress@amazon.com \
    --to=galpress@amazon.com \
    --cc=dkkranzd@amazon.com \
    --cc=dledford@redhat.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-rdma@vger.kernel.org \
    --cc=sleybo@amazon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).