linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krishnamraju Eraparaju <krishna2@chelsio.com>
To: Bernard Metzler <BMT@zurich.ibm.com>
Cc: jgg@ziepe.ca, linux-rdma@vger.kernel.org, bharat@chelsio.com,
	nirranjan@chelsio.com
Subject: Re: [PATCH for-next] RDMA/siw: fixes serialization issue in write_space
Date: Tue, 24 Sep 2019 01:56:31 +0530	[thread overview]
Message-ID: <20190923202629.GA24416@chelsio.com> (raw)
In-Reply-To: <OFF07E93B6.E63D8785-ON0025847E.003DA8D0-0025847E.003EAD9D@notes.na.collabserv.com>

Hi Bernard,

write_space callback may not always be called from softirq/tasklet
context, it may be called from process context.
Hence, read_lock_bh() is safer than read_lock().

I will resubmit the patch.

Also, after looking at the below commit, I feel all other read_lock()
in SIW driver should be replaced with BH variants.

https://github.com/torvalds/linux/commit/7cb001d4c4fa7e1cc1a55388a9544e160dddc610



Shall I also change all other occurances of read_lock() to
read_lock_bh()?


Thanks,
Krishna.

On Monday, September 09/23/19, 2019 at 11:24:36 +0000, Bernard Metzler wrote:
> -----"Krishnamraju Eraparaju" <krishna2@chelsio.com> wrote: -----
> 
> >To: jgg@ziepe.ca, bmt@zurich.ibm.com
> >From: "Krishnamraju Eraparaju" <krishna2@chelsio.com>
> >Date: 09/23/2019 12:11PM
> >Cc: linux-rdma@vger.kernel.org, bharat@chelsio.com,
> >nirranjan@chelsio.com, "Krishnamraju Eraparaju"
> ><krishna2@chelsio.com>
> >Subject: [EXTERNAL] [PATCH for-next] RDMA/siw: fixes serialization
> >issue in write_space
> >
> >In siw_qp_llp_write_space(), 'sock' members should be accessed
> >with sk_callback_lock held, otherwise, it could race with
> >siw_sk_restore_upcalls(). And this could cause "NULL deref" panic.
> >Below panic is due to the NULL cep returned from sk_to_cep(sk):
> >[14524.030863] Call Trace:
> >[14524.030868]  <IRQ>    siw_qp_llp_write_space+0x11/0x40 [siw]
> >[14524.030873]  tcp_check_space+0x4c/0xf0
> >[14524.030877]  tcp_rcv_established+0x52b/0x630
> >[14524.030880]  tcp_v4_do_rcv+0xf4/0x1e0
> >[14524.030882]  tcp_v4_rcv+0x9b8/0xab0
> >[14524.030886]  ip_protocol_deliver_rcu+0x2c/0x1c0
> >[14524.030889]  ip_local_deliver_finish+0x44/0x50
> >[14524.030891]  ip_local_deliver+0x6b/0xf0
> >[14524.030893]  ? ip_protocol_deliver_rcu+0x1c0/0x1c0
> >[14524.030896]  ip_rcv+0x52/0xd0
> >[14524.030898]  ? ip_rcv_finish_core.isra.14+0x390/0x390
> >[14524.030903]  __netif_receive_skb_one_core+0x83/0xa0
> >[14524.030906]  netif_receive_skb_internal+0x73/0xb0
> >[14524.030909]  napi_gro_frags+0x1ff/0x2b0
> >[14524.030922]  t4_ethrx_handler+0x4a7/0x740 [cxgb4]
> >[14524.030930]  process_responses+0x2c9/0x590 [cxgb4]
> >[14524.030937]  ? t4_sge_intr_msix+0x1d/0x30 [cxgb4]
> >[14524.030941]  ? handle_irq_event_percpu+0x51/0x70
> >[14524.030943]  ? handle_irq_event+0x41/0x60
> >[14524.030946]  ? handle_edge_irq+0x97/0x1a0
> >[14524.030952]  napi_rx_handler+0x14/0xe0 [cxgb4]
> >[14524.030955]  net_rx_action+0x2af/0x410
> >[14524.030962]  __do_softirq+0xda/0x2a8
> >[14524.030965]  do_softirq_own_stack+0x2a/0x40
> >[14524.030967]  </IRQ>
> >[14524.030969]  do_softirq+0x50/0x60
> >[14524.030972]  __local_bh_enable_ip+0x50/0x60
> >[14524.030974]  ip_finish_output2+0x18f/0x520
> >[14524.030977]  ip_output+0x6e/0xf0
> >[14524.030979]  ? __ip_finish_output+0x1f0/0x1f0
> >[14524.030982]  __ip_queue_xmit+0x14f/0x3d0
> >[14524.030986]  ? __slab_alloc+0x4b/0x58
> >[14524.030990]  __tcp_transmit_skb+0x57d/0xa60
> >[14524.030992]  tcp_write_xmit+0x23b/0xfd0
> >[14524.030995]  __tcp_push_pending_frames+0x2e/0xf0
> >[14524.030998]  tcp_sendmsg_locked+0x939/0xd50
> >[14524.031001]  tcp_sendmsg+0x27/0x40
> >[14524.031004]  sock_sendmsg+0x57/0x80
> >[14524.031009]  siw_tx_hdt+0x894/0xb20 [siw]
> >[14524.031015]  ? find_busiest_group+0x3e/0x5b0
> >[14524.031019]  ? common_interrupt+0xa/0xf
> >[14524.031021]  ? common_interrupt+0xa/0xf
> >[14524.031023]  ? common_interrupt+0xa/0xf
> >[14524.031028]  siw_qp_sq_process+0xf1/0xe60 [siw]
> >[14524.031031]  ? __wake_up_common_lock+0x87/0xc0
> >[14524.031035]  siw_sq_resume+0x33/0xe0 [siw]
> >[14524.031039]  siw_run_sq+0xac/0x190 [siw]
> >[14524.031041]  ? remove_wait_queue+0x60/0x60
> >[14524.031045]  kthread+0xf8/0x130
> >[14524.031049]  ? siw_sq_resume+0xe0/0xe0 [siw]
> >[14524.031051]  ? kthread_bind+0x10/0x10
> >[14524.031053]  ret_from_fork+0x35/0x40
> >
> >Fixes: f29dd55b0236 (rdma/siw: queue pair methods)
> >Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
> >---
> > drivers/infiniband/sw/siw/siw_qp.c | 15 +++++++++++----
> > 1 file changed, 11 insertions(+), 4 deletions(-)
> >
> >diff --git a/drivers/infiniband/sw/siw/siw_qp.c
> >b/drivers/infiniband/sw/siw/siw_qp.c
> >index 430314c8abd9..52d402f39df9 100644
> >--- a/drivers/infiniband/sw/siw/siw_qp.c
> >+++ b/drivers/infiniband/sw/siw/siw_qp.c
> >@@ -182,12 +182,19 @@ void siw_qp_llp_close(struct siw_qp *qp)
> >  */
> > void siw_qp_llp_write_space(struct sock *sk)
> > {
> >-	struct siw_cep *cep = sk_to_cep(sk);
> >+	struct siw_cep *cep;
> > 
> >-	cep->sk_write_space(sk);
> >+	read_lock(&sk->sk_callback_lock);
> >+
> >+	cep  = sk_to_cep(sk);
> >+	if (cep) {
> >+		cep->sk_write_space(sk);
> > 
> >-	if (!test_bit(SOCK_NOSPACE, &sk->sk_socket->flags))
> >-		(void)siw_sq_start(cep->qp);
> >+		if (!test_bit(SOCK_NOSPACE, &sk->sk_socket->flags))
> >+			(void)siw_sq_start(cep->qp);
> >+	}
> >+
> >+	read_unlock(&sk->sk_callback_lock);
> > }
> > 
> > static int siw_qp_readq_init(struct siw_qp *qp, int irq_size, int
> >orq_size)
> >-- 
> >2.23.0.rc0
> >
> >
> 
> Hi Krishna,
> 
> Many thanks! I completely agree. This fixes a potential race.
> I was under the impression the socket layer itself would hold
> the sk_callback_lock during the writespace upcall, which is
> obviously not true.
> 
> Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
> 

  reply	other threads:[~2019-09-23 20:26 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-23 10:11 [PATCH for-next] RDMA/siw: fixes serialization issue in write_space Krishnamraju Eraparaju
2019-09-23 11:24 ` Bernard Metzler
2019-09-23 20:26   ` Krishnamraju Eraparaju [this message]
2019-09-24 15:50   ` Bernard Metzler
2019-09-26 13:38   ` Bernard Metzler
2019-09-26 16:52     ` Krishnamraju Eraparaju
2019-10-01 14:17 ` Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190923202629.GA24416@chelsio.com \
    --to=krishna2@chelsio.com \
    --cc=BMT@zurich.ibm.com \
    --cc=bharat@chelsio.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-rdma@vger.kernel.org \
    --cc=nirranjan@chelsio.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).