From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>,
linux-rdma@vger.kernel.org, Mark Zhang <markz@mellanox.com>
Subject: [PATCH rdma-next v1 9/9] RDMA/mlx5: Return ECE data after modify QP
Date: Sat, 23 May 2020 16:22:43 +0300 [thread overview]
Message-ID: <20200523132243.817936-10-leon@kernel.org> (raw)
In-Reply-To: <20200523132243.817936-1-leon@kernel.org>
From: Leon Romanovsky <leonro@mellanox.com>
After users sets the ECE option, FW will return the
agreed/supported bits through an output structures of
modify QP stages for regular QPs or through create QP
for the DCT.
Reviewed-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
drivers/infiniband/hw/mlx5/qp.c | 40 +++++++++++++++++++++++++-------
drivers/infiniband/hw/mlx5/qpc.c | 25 ++++++++++++++++++++
include/uapi/rdma/mlx5-abi.h | 2 ++
3 files changed, 59 insertions(+), 8 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index b4a8ab80c2f4..ee56e6913679 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -3707,6 +3707,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
enum ib_qp_state cur_state,
enum ib_qp_state new_state,
const struct mlx5_ib_modify_qp *ucmd,
+ struct mlx5_ib_modify_qp_resp *resp,
struct ib_udata *udata)
{
static const u16 optab[MLX5_QP_NUM_STATE][MLX5_QP_NUM_STATE] = {
@@ -3977,10 +3978,15 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
err = modify_raw_packet_qp(dev, qp, &raw_qp_param, tx_affinity);
} else {
- u32 ece = MLX5_CAP_GEN(dev->mdev, ece_support) ?
- ucmd->ece_options : 0;
+ if (udata) {
+ /* For the kernel flows, the resp will stay zero */
+ resp->ece_options =
+ MLX5_CAP_GEN(dev->mdev, ece_support) ?
+ ucmd->ece_options : 0;
+ resp->response_length = sizeof(*resp);
+ }
err = mlx5_core_qp_modify(dev, op, optpar, qpc, &base->mqp,
- &ece);
+ &resp->ece_options);
}
if (err)
@@ -4145,13 +4151,19 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr,
MLX5_SET(dctc, dctc, counter_set_id, set_id);
} else if (cur_state == IB_QPS_INIT && new_state == IB_QPS_RTR) {
struct mlx5_ib_modify_qp_resp resp = {};
- u32 out[MLX5_ST_SZ_DW(create_dct_out)] = {0};
- u32 min_resp_len = offsetof(typeof(resp), dctn) +
- sizeof(resp.dctn);
+ u32 out[MLX5_ST_SZ_DW(create_dct_out)] = {};
+ u32 min_resp_len = offsetofend(typeof(resp), dctn);
if (udata->outlen < min_resp_len)
return -EINVAL;
- resp.response_length = min_resp_len;
+
+ /*
+ * If we don't have enough space for the ECE options,
+ * simply indicate it with resp.response_length.
+ */
+ resp.response_length = (udata->outlen < sizeof(resp)) ?
+ min_resp_len :
+ sizeof(resp);
required |= IB_QP_MIN_RNR_TIMER | IB_QP_AV | IB_QP_PATH_MTU;
if (!is_valid_mask(attr_mask, required, 0))
@@ -4169,6 +4181,7 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr,
if (err)
return err;
resp.dctn = qp->dct.mdct.mqp.qpn;
+ resp.ece_options = MLX5_GET(create_dct_out, out, ece);
err = ib_copy_to_udata(udata, &resp, resp.response_length);
if (err) {
mlx5_core_destroy_dct(dev, &qp->dct.mdct);
@@ -4189,6 +4202,7 @@ int mlx5_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_udata *udata)
{
struct mlx5_ib_dev *dev = to_mdev(ibqp->device);
+ struct mlx5_ib_modify_qp_resp resp = {};
struct mlx5_ib_qp *qp = to_mqp(ibqp);
struct mlx5_ib_modify_qp ucmd = {};
enum ib_qp_type qp_type;
@@ -4296,7 +4310,17 @@ int mlx5_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
}
err = __mlx5_ib_modify_qp(ibqp, attr, attr_mask, cur_state,
- new_state, &ucmd, udata);
+ new_state, &ucmd, &resp, udata);
+
+ /* resp.response_length is set in ECE supported flows only */
+ if (!err && resp.response_length &&
+ udata->outlen >= resp.response_length)
+ /*
+ * We don't check return value of the function below
+ * on purpose, because it is unclear how to unwind the
+ * error flow after QP was modified to the new state.
+ */
+ ib_copy_to_udata(udata, &resp, resp.response_length);
out:
mutex_unlock(&qp->mutex);
diff --git a/drivers/infiniband/hw/mlx5/qpc.c b/drivers/infiniband/hw/mlx5/qpc.c
index d61bc1a88925..c19d91d6dce8 100644
--- a/drivers/infiniband/hw/mlx5/qpc.c
+++ b/drivers/infiniband/hw/mlx5/qpc.c
@@ -341,6 +341,27 @@ static void mbox_free(struct mbox_info *mbox)
kfree(mbox->out);
}
+static int get_ece_from_mbox(void *out, u16 opcode)
+{
+ int ece = 0;
+
+ switch (opcode) {
+ case MLX5_CMD_OP_INIT2RTR_QP:
+ ece = MLX5_GET(init2rtr_qp_out, out, ece);
+ break;
+ case MLX5_CMD_OP_RTR2RTS_QP:
+ ece = MLX5_GET(rtr2rts_qp_out, out, ece);
+ break;
+ case MLX5_CMD_OP_RTS2RTS_QP:
+ ece = MLX5_GET(rts2rts_qp_out, out, ece);
+ break;
+ default:
+ break;
+ }
+
+ return ece;
+}
+
static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
u32 opt_param_mask, void *qpc,
struct mbox_info *mbox, u16 uid, u32 ece)
@@ -438,6 +459,10 @@ int mlx5_core_qp_modify(struct mlx5_ib_dev *dev, u16 opcode, u32 opt_param_mask,
err = mlx5_cmd_exec(dev->mdev, mbox.in, mbox.inlen, mbox.out,
mbox.outlen);
+
+ if (ece)
+ *ece = get_ece_from_mbox(mbox.out, opcode);
+
mbox_free(&mbox);
return err;
}
diff --git a/include/uapi/rdma/mlx5-abi.h b/include/uapi/rdma/mlx5-abi.h
index 24e29a678177..27905a0268c9 100644
--- a/include/uapi/rdma/mlx5-abi.h
+++ b/include/uapi/rdma/mlx5-abi.h
@@ -429,6 +429,8 @@ struct mlx5_ib_modify_qp {
struct mlx5_ib_modify_qp_resp {
__u32 response_length;
__u32 dctn;
+ __u32 ece_options;
+ __u32 reserved;
};
struct mlx5_ib_create_wq_resp {
--
2.26.2
prev parent reply other threads:[~2020-05-23 13:23 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-23 13:22 [PATCH rdma-next v1 0/9] Driver part of the ECE Leon Romanovsky
2020-05-23 13:22 ` [PATCH mlx5-next v1 1/9] net/mlx5: Add ability to read and write ECE options Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 2/9] RDMA/mlx5: Get ECE options from FW during create QP Leon Romanovsky
2020-05-25 18:17 ` Jason Gunthorpe
2020-05-25 18:27 ` Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 3/9] RDMA/mlx5: Set ECE options during QP create Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 4/9] RDMA/mlx5: Use direct modify QP implementation Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 5/9] RDMA/mlx5: Remove manually crafted QP context the query call Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 6/9] RDMA/mlx5: Convert modify QP to use MLX5_SET macros Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 7/9] RDMA/mlx5: Advertise ECE support Leon Romanovsky
2020-05-25 18:18 ` Jason Gunthorpe
2020-05-25 18:29 ` Leon Romanovsky
2020-05-23 13:22 ` [PATCH rdma-next v1 8/9] RDMA/mlx5: Set ECE options during modify QP Leon Romanovsky
2020-05-23 13:22 ` Leon Romanovsky [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200523132243.817936-10-leon@kernel.org \
--to=leon@kernel.org \
--cc=dledford@redhat.com \
--cc=jgg@mellanox.com \
--cc=leonro@mellanox.com \
--cc=linux-rdma@vger.kernel.org \
--cc=markz@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).