From: Leon Romanovsky <leon@kernel.org>
To: Doug Ledford <dledford@redhat.com>, Jason Gunthorpe <jgg@nvidia.com>
Cc: Aharon Landau <aharonl@mellanox.com>,
Achiad Shochat <achiad@mellanox.com>,
Jakub Kicinski <kuba@kernel.org>,
linux-rdma@vger.kernel.org,
Michael Guralnik <michaelgur@nvidia.com>,
netdev@vger.kernel.org, Saeed Mahameed <saeedm@nvidia.com>
Subject: [PATCH mlx5-next 1/3] net/mlx5: Refactor query port speed functions
Date: Mon, 24 Aug 2020 13:58:24 +0300 [thread overview]
Message-ID: <20200824105826.1093613-2-leon@kernel.org> (raw)
In-Reply-To: <20200824105826.1093613-1-leon@kernel.org>
From: Aharon Landau <aharonl@mellanox.com>
The functions mlx5_query_port_link_width_oper and
mlx5_query_port_ib_proto_oper are always called together, so combine them
to a new function called mlx5_query_port_oper to avoid duplication.
And while the mlx5i_get_port_settings is the same as
mlx5_query_port_oper therefore let's remove it.
According to the IB spec link_width_oper and ib_proto_oper should be u16
and not as written u8, so perform casting as a preparation to cross-RDMA
patch which will fix that type for all drivers in the RDMA subsystem.
Fixes: ada68c31ba9c ("net/mlx5: Introduce a new header file for physical port functions")
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
drivers/infiniband/hw/mlx5/main.c | 23 ++++++++-----------
.../mellanox/mlx5/core/ipoib/ethtool.c | 23 ++++---------------
.../net/ethernet/mellanox/mlx5/core/port.c | 23 ++++---------------
include/linux/mlx5/port.h | 7 +++---
4 files changed, 21 insertions(+), 55 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 4960e3b31c94..55d3631b64f9 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -326,8 +326,8 @@ void mlx5_ib_put_native_port_mdev(struct mlx5_ib_dev *ibdev, u8 port_num)
spin_unlock(&port->mp.mpi_lock);
}
-static int translate_eth_legacy_proto_oper(u32 eth_proto_oper, u8 *active_speed,
- u8 *active_width)
+static int translate_eth_legacy_proto_oper(u32 eth_proto_oper,
+ u16 *active_speed, u8 *active_width)
{
switch (eth_proto_oper) {
case MLX5E_PROT_MASK(MLX5E_1000BASE_CX_SGMII):
@@ -384,7 +384,7 @@ static int translate_eth_legacy_proto_oper(u32 eth_proto_oper, u8 *active_speed,
return 0;
}
-static int translate_eth_ext_proto_oper(u32 eth_proto_oper, u8 *active_speed,
+static int translate_eth_ext_proto_oper(u32 eth_proto_oper, u16 *active_speed,
u8 *active_width)
{
switch (eth_proto_oper) {
@@ -436,7 +436,7 @@ static int translate_eth_ext_proto_oper(u32 eth_proto_oper, u8 *active_speed,
return 0;
}
-static int translate_eth_proto_oper(u32 eth_proto_oper, u8 *active_speed,
+static int translate_eth_proto_oper(u32 eth_proto_oper, u16 *active_speed,
u8 *active_width, bool ext)
{
return ext ?
@@ -490,7 +490,7 @@ static int mlx5_query_port_roce(struct ib_device *device, u8 port_num,
props->active_width = IB_WIDTH_4X;
props->active_speed = IB_SPEED_QDR;
- translate_eth_proto_oper(eth_prot_oper, &props->active_speed,
+ translate_eth_proto_oper(eth_prot_oper, (u16 *)&props->active_speed,
&props->active_width, ext);
props->port_cap_flags |= IB_PORT_CM_SUP;
@@ -1183,8 +1183,8 @@ enum mlx5_ib_width {
MLX5_IB_WIDTH_12X = 1 << 4
};
-static void translate_active_width(struct ib_device *ibdev, u8 active_width,
- u8 *ib_width)
+static void translate_active_width(struct ib_device *ibdev, u16 active_width,
+ u8 *ib_width)
{
struct mlx5_ib_dev *dev = to_mdev(ibdev);
@@ -1277,7 +1277,7 @@ static int mlx5_query_hca_port(struct ib_device *ibdev, u8 port,
u16 max_mtu;
u16 oper_mtu;
int err;
- u8 ib_link_width_oper;
+ u16 ib_link_width_oper;
u8 vl_hw_cap;
rep = kzalloc(sizeof(*rep), GFP_KERNEL);
@@ -1310,16 +1310,13 @@ static int mlx5_query_hca_port(struct ib_device *ibdev, u8 port,
if (props->port_cap_flags & IB_PORT_CAP_MASK2_SUP)
props->port_cap_flags2 = rep->cap_mask2;
- err = mlx5_query_port_link_width_oper(mdev, &ib_link_width_oper, port);
+ err = mlx5_query_ib_port_oper(mdev, &ib_link_width_oper,
+ (u16 *)&props->active_speed, port);
if (err)
goto out;
translate_active_width(ibdev, ib_link_width_oper, &props->active_width);
- err = mlx5_query_port_ib_proto_oper(mdev, &props->active_speed, port);
- if (err)
- goto out;
-
mlx5_query_port_max_mtu(mdev, &max_mtu, port);
props->max_mtu = mlx5_mtu_to_ib_mtu(max_mtu);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
index 1eef66ee849e..17f5be801d2f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ethtool.c
@@ -174,24 +174,6 @@ static inline int mlx5_ptys_rate_enum_to_int(enum mlx5_ptys_rate rate)
}
}
-static int mlx5i_get_port_settings(struct net_device *netdev,
- u16 *ib_link_width_oper, u16 *ib_proto_oper)
-{
- struct mlx5e_priv *priv = mlx5i_epriv(netdev);
- struct mlx5_core_dev *mdev = priv->mdev;
- u32 out[MLX5_ST_SZ_DW(ptys_reg)] = {0};
- int ret;
-
- ret = mlx5_query_port_ptys(mdev, out, sizeof(out), MLX5_PTYS_IB, 1);
- if (ret)
- return ret;
-
- *ib_link_width_oper = MLX5_GET(ptys_reg, out, ib_link_width_oper);
- *ib_proto_oper = MLX5_GET(ptys_reg, out, ib_proto_oper);
-
- return 0;
-}
-
static int mlx5i_get_speed_settings(u16 ib_link_width_oper, u16 ib_proto_oper)
{
int rate, width;
@@ -209,11 +191,14 @@ static int mlx5i_get_speed_settings(u16 ib_link_width_oper, u16 ib_proto_oper)
static int mlx5i_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *link_ksettings)
{
+ struct mlx5e_priv *priv = mlx5i_epriv(netdev);
+ struct mlx5_core_dev *mdev = priv->mdev;
u16 ib_link_width_oper;
u16 ib_proto_oper;
int speed, ret;
- ret = mlx5i_get_port_settings(netdev, &ib_link_width_oper, &ib_proto_oper);
+ ret = mlx5_query_ib_port_oper(mdev, &ib_link_width_oper, &ib_proto_oper,
+ 1);
if (ret)
return ret;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index e4186e84b3ff..4bb219565c58 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -154,24 +154,8 @@ int mlx5_set_port_beacon(struct mlx5_core_dev *dev, u16 beacon_duration)
sizeof(out), MLX5_REG_MLCR, 0, 1);
}
-int mlx5_query_port_link_width_oper(struct mlx5_core_dev *dev,
- u8 *link_width_oper, u8 local_port)
-{
- u32 out[MLX5_ST_SZ_DW(ptys_reg)];
- int err;
-
- err = mlx5_query_port_ptys(dev, out, sizeof(out), MLX5_PTYS_IB, local_port);
- if (err)
- return err;
-
- *link_width_oper = MLX5_GET(ptys_reg, out, ib_link_width_oper);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(mlx5_query_port_link_width_oper);
-
-int mlx5_query_port_ib_proto_oper(struct mlx5_core_dev *dev,
- u8 *proto_oper, u8 local_port)
+int mlx5_query_ib_port_oper(struct mlx5_core_dev *dev, u16 *link_width_oper,
+ u16 *proto_oper, u8 local_port)
{
u32 out[MLX5_ST_SZ_DW(ptys_reg)];
int err;
@@ -181,11 +165,12 @@ int mlx5_query_port_ib_proto_oper(struct mlx5_core_dev *dev,
if (err)
return err;
+ *link_width_oper = MLX5_GET(ptys_reg, out, ib_link_width_oper);
*proto_oper = MLX5_GET(ptys_reg, out, ib_proto_oper);
return 0;
}
-EXPORT_SYMBOL(mlx5_query_port_ib_proto_oper);
+EXPORT_SYMBOL(mlx5_query_ib_port_oper);
/* This function should be used after setting a port register only */
void mlx5_toggle_port_link(struct mlx5_core_dev *dev)
diff --git a/include/linux/mlx5/port.h b/include/linux/mlx5/port.h
index 2d45a6af52a4..4d33ae0c2d97 100644
--- a/include/linux/mlx5/port.h
+++ b/include/linux/mlx5/port.h
@@ -133,10 +133,9 @@ enum mlx5e_connector_type {
int mlx5_set_port_caps(struct mlx5_core_dev *dev, u8 port_num, u32 caps);
int mlx5_query_port_ptys(struct mlx5_core_dev *dev, u32 *ptys,
int ptys_size, int proto_mask, u8 local_port);
-int mlx5_query_port_link_width_oper(struct mlx5_core_dev *dev,
- u8 *link_width_oper, u8 local_port);
-int mlx5_query_port_ib_proto_oper(struct mlx5_core_dev *dev,
- u8 *proto_oper, u8 local_port);
+
+int mlx5_query_ib_port_oper(struct mlx5_core_dev *dev, u16 *link_width_oper,
+ u16 *proto_oper, u8 local_port);
void mlx5_toggle_port_link(struct mlx5_core_dev *dev);
int mlx5_set_port_admin_status(struct mlx5_core_dev *dev,
enum mlx5_port_status status);
--
2.26.2
next prev parent reply other threads:[~2020-08-24 10:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-24 10:58 [PATCH rdma-next 0/3] Fix in-kernel active_speed type Leon Romanovsky
2020-08-24 10:58 ` Leon Romanovsky [this message]
2020-08-27 12:45 ` [PATCH mlx5-next 1/3] net/mlx5: Refactor query port speed functions Jason Gunthorpe
2020-08-24 10:58 ` [PATCH mlx5-next 2/3] RDMA/mlx5: Delete duplicated mlx5_ptys_width enum Leon Romanovsky
2020-08-24 10:58 ` [PATCH rdma-next 3/3] RDMA: Fix link active_speed size Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200824105826.1093613-2-leon@kernel.org \
--to=leon@kernel.org \
--cc=achiad@mellanox.com \
--cc=aharonl@mellanox.com \
--cc=dledford@redhat.com \
--cc=jgg@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=michaelgur@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=saeedm@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).