linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Ertman <david.m.ertman@intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, broonie@kernel.org, linux-rdma@vger.kernel.org,
	jgg@nvidia.com, dledford@redhat.com, netdev@vger.kernel.org,
	davem@davemloft.net, kuba@kernel.org, gregkh@linuxfoundation.org,
	ranjani.sridharan@linux.intel.com,
	pierre-louis.bossart@linux.intel.com, fred.oh@linux.intel.com,
	parav@mellanox.com, shiraz.saleem@intel.com,
	dan.j.williams@intel.com, kiran.patil@intel.com
Subject: [PATCH v2 3/6] ASoC: SOF: Create client driver for IPC test
Date: Mon,  5 Oct 2020 11:24:43 -0700	[thread overview]
Message-ID: <20201005182446.977325-4-david.m.ertman@intel.com> (raw)
In-Reply-To: <20201005182446.977325-1-david.m.ertman@intel.com>

From: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>

Create an SOF client driver for IPC flood test. This
driver is used to set up the debugfs entries and the
read/write ops for initiating the IPC flood test that
would be used to measure the min/max/avg response times
for sending IPCs to the DSP.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
---
 sound/soc/sof/Kconfig               |  10 +
 sound/soc/sof/Makefile              |   4 +
 sound/soc/sof/sof-ipc-test-client.c | 332 ++++++++++++++++++++++++++++
 3 files changed, 346 insertions(+)
 create mode 100644 sound/soc/sof/sof-ipc-test-client.c

diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig
index cea7efedafef..55a2a20c3ec9 100644
--- a/sound/soc/sof/Kconfig
+++ b/sound/soc/sof/Kconfig
@@ -190,6 +190,16 @@ config SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST
 	  Say Y if you want to enable IPC flood test.
 	  If unsure, select "N".
 
+config SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_CLIENT
+	tristate "SOF enable IPC flood test client"
+	depends on SND_SOC_SOF_CLIENT
+	help
+	  This option enables a separate client device for IPC flood test
+	  which can be used to flood the DSP with test IPCs and gather stats
+	  about response times.
+	  Say Y if you want to enable IPC flood test.
+	  If unsure, select "N".
+
 config SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT
 	bool "SOF retain DSP context on any FW exceptions"
 	help
diff --git a/sound/soc/sof/Makefile b/sound/soc/sof/Makefile
index 5e46f25a3851..baa93fe2cc9a 100644
--- a/sound/soc/sof/Makefile
+++ b/sound/soc/sof/Makefile
@@ -9,6 +9,8 @@ snd-sof-pci-objs := sof-pci-dev.o
 snd-sof-acpi-objs := sof-acpi-dev.o
 snd-sof-of-objs := sof-of-dev.o
 
+snd-sof-ipc-test-objs := sof-ipc-test-client.o
+
 snd-sof-nocodec-objs := nocodec.o
 
 obj-$(CONFIG_SND_SOC_SOF) += snd-sof.o
@@ -21,6 +23,8 @@ obj-$(CONFIG_SND_SOC_SOF_PCI) += snd-sof-pci.o
 
 obj-$(CONFIG_SND_SOC_SOF_CLIENT) += snd-sof-client.o
 
+obj-$(CONFIG_SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_CLIENT) += snd-sof-ipc-test.o
+
 obj-$(CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL) += intel/
 obj-$(CONFIG_SND_SOC_SOF_IMX_TOPLEVEL) += imx/
 obj-$(CONFIG_SND_SOC_SOF_XTENSA) += xtensa/
diff --git a/sound/soc/sof/sof-ipc-test-client.c b/sound/soc/sof/sof-ipc-test-client.c
new file mode 100644
index 000000000000..e541cace06f4
--- /dev/null
+++ b/sound/soc/sof/sof-ipc-test-client.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2020 Intel Corporation. All rights reserved.
+//
+// Author: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
+//
+
+#include <linux/completion.h>
+#include <linux/debugfs.h>
+#include <linux/ktime.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/ancillary_bus.h>
+#include <sound/sof/header.h>
+#include "sof-client.h"
+
+#define MAX_IPC_FLOOD_DURATION_MS 1000
+#define MAX_IPC_FLOOD_COUNT 10000
+#define IPC_FLOOD_TEST_RESULT_LEN 512
+#define SOF_IPC_CLIENT_SUSPEND_DELAY_MS 3000
+
+struct sof_ipc_client_data {
+	struct dentry *dfs_root;
+	char *buf;
+};
+
+/*
+ * helper function to perform the flood test. Only one of the two params, ipc_duration_ms
+ * or ipc_count, will be non-zero and will determine the type of test
+ */
+static int sof_debug_ipc_flood_test(struct sof_client_dev *cdev, unsigned long ipc_duration_ms,
+				    unsigned long ipc_count)
+{
+	struct sof_ipc_client_data *ipc_client_data = cdev->data;
+	struct device *dev = &cdev->ancildev.dev;
+	struct sof_ipc_cmd_hdr hdr;
+	struct sof_ipc_reply reply;
+	u64 min_response_time = U64_MAX;
+	u64 avg_response_time = 0;
+	u64 max_response_time = 0;
+	ktime_t cur = ktime_get();
+	ktime_t test_end;
+	int i = 0;
+	int ret = 0;
+	bool end_test = false;
+
+	/* configure test IPC */
+	hdr.cmd = SOF_IPC_GLB_TEST_MSG | SOF_IPC_TEST_IPC_FLOOD;
+	hdr.size = sizeof(hdr);
+
+	/* set test end time for duration flood test */
+	test_end = ktime_get_ns() + ipc_duration_ms * NSEC_PER_MSEC;
+
+	/* send test IPC's */
+	do {
+		ktime_t start;
+		u64 ipc_response_time;
+
+		start = ktime_get();
+		ret = sof_client_ipc_tx_message(cdev, hdr.cmd, &hdr, hdr.size, &reply,
+						sizeof(reply));
+		if (ret < 0)
+			break;
+		cur = ktime_get();
+
+		i++;
+
+		/* compute min and max response times */
+		ipc_response_time = ktime_to_ns(ktime_sub(cur, start));
+		min_response_time = min(min_response_time, ipc_response_time);
+		max_response_time = max(max_response_time, ipc_response_time);
+
+		/* sum up response times */
+		avg_response_time += ipc_response_time;
+
+		/* end test? */
+		if (ipc_count && i == ipc_count)
+			end_test = true;
+		else if (ipc_duration_ms && (ktime_to_ns(cur) >= test_end))
+			end_test = true;
+
+	} while (!end_test);
+
+	if (ret < 0)
+		return ret;
+
+	/* return if the first IPC fails */
+	if (!i)
+		return ret;
+
+	/* compute average response time */
+	DIV_ROUND_CLOSEST(avg_response_time, i);
+
+	/* clear previous test output */
+	memset(ipc_client_data->buf, 0, IPC_FLOOD_TEST_RESULT_LEN);
+
+	if (!ipc_count) {
+		dev_dbg(dev, "IPC Flood test duration: %lums\n", ipc_duration_ms);
+		snprintf(ipc_client_data->buf, IPC_FLOOD_TEST_RESULT_LEN,
+			 "IPC Flood test duration: %lums\n", ipc_duration_ms);
+	}
+
+	dev_dbg(dev,
+		"IPC Flood count: %d, Avg response time: %lluns\n", i, avg_response_time);
+	dev_dbg(dev, "Max response time: %lluns\n", max_response_time);
+	dev_dbg(dev, "Min response time: %lluns\n", min_response_time);
+
+	/* format output string and save test results */
+	snprintf(ipc_client_data->buf + strlen(ipc_client_data->buf),
+		 IPC_FLOOD_TEST_RESULT_LEN - strlen(ipc_client_data->buf),
+		 "IPC Flood count: %d\nAvg response time: %lluns\n", i, avg_response_time);
+
+	snprintf(ipc_client_data->buf + strlen(ipc_client_data->buf),
+		 IPC_FLOOD_TEST_RESULT_LEN - strlen(ipc_client_data->buf),
+		 "Max response time: %lluns\nMin response time: %lluns\n",
+		 max_response_time, min_response_time);
+
+	return ret;
+}
+
+/*
+ * Writing to the debugfs entry initiates the IPC flood test based on
+ * the IPC count or the duration specified by the user.
+ */
+static ssize_t sof_ipc_dfsentry_write(struct file *file, const char __user *buffer,
+				      size_t count, loff_t *ppos)
+{
+	struct dentry *dentry = file->f_path.dentry;
+	struct sof_client_dev *cdev = file->private_data;
+	struct device *dev = &cdev->ancildev.dev;
+	unsigned long ipc_duration_ms = 0;
+	bool flood_duration_test;
+	unsigned long ipc_count = 0;
+	char *string;
+	size_t size;
+	int err;
+	int ret;
+
+	string = kzalloc(count, GFP_KERNEL);
+	if (!string)
+		return -ENOMEM;
+
+	size = simple_write_to_buffer(string, count, ppos, buffer, count);
+
+	flood_duration_test = !strcmp(dentry->d_name.name, "ipc_flood_duration_ms");
+
+	/* limit max duration/ipc count for flood test */
+	if (flood_duration_test) {
+		ret = kstrtoul(string, 0, &ipc_duration_ms);
+		if (ret < 0)
+			goto out;
+
+		if (!ipc_duration_ms) {
+			ret = size;
+			goto out;
+		}
+
+		ipc_duration_ms = min_t(unsigned long, ipc_duration_ms, MAX_IPC_FLOOD_DURATION_MS);
+	} else {
+		ret = kstrtoul(string, 0, &ipc_count);
+		if (ret < 0)
+			goto out;
+
+		if (!ipc_count) {
+			ret = size;
+			goto out;
+		}
+
+		ipc_count = min_t(unsigned long, ipc_count, MAX_IPC_FLOOD_COUNT);
+	}
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0 && ret != -EACCES) {
+		dev_err_ratelimited(dev, "error: debugfs write failed to resume %d\n", ret);
+		pm_runtime_put_noidle(dev);
+		goto out;
+	}
+
+	ret = sof_debug_ipc_flood_test(cdev, ipc_duration_ms, ipc_count);
+
+	pm_runtime_mark_last_busy(dev);
+	err = pm_runtime_put_autosuspend(dev);
+	if (err < 0) {
+		ret = err;
+		goto out;
+	}
+
+	/* return size if test is successful */
+	if (ret >= 0)
+		ret = size;
+out:
+	kfree(string);
+	return ret;
+}
+
+/* return the result of the last IPC flood test */
+static ssize_t sof_ipc_dfsentry_read(struct file *file, char __user *buffer,
+				     size_t count, loff_t *ppos)
+{
+	struct sof_client_dev *cdev = file->private_data;
+	struct sof_ipc_client_data *ipc_client_data = cdev->data;
+	size_t size_ret;
+
+	if (*ppos)
+		return 0;
+
+	/* return results of the last IPC test */
+	count = min_t(size_t, count, strlen(ipc_client_data->buf));
+	size_ret = copy_to_user(buffer, ipc_client_data->buf, count);
+	if (size_ret)
+		return -EFAULT;
+
+	*ppos += count;
+	return count;
+}
+
+static const struct file_operations sof_ipc_dfs_fops = {
+	.open = simple_open,
+	.read = sof_ipc_dfsentry_read,
+	.llseek = default_llseek,
+	.write = sof_ipc_dfsentry_write,
+};
+
+/*
+ * The IPC test client creates a couple of debugfs entries that will be used
+ * flood tests. Users can write to these entries to execute the IPC flood test
+ * by specifying either the number of IPCs to flood the DSP with or the duration
+ * (in ms) for which the DSP should be flooded with test IPCs. At the
+ * end of each test, the average, min and max response times are reported back.
+ * The results of the last flood test can be accessed by reading the debugfs
+ * entries.
+ */
+static int sof_ipc_test_probe(struct ancillary_device *ancildev,
+			      const struct ancillary_device_id *id)
+{
+	struct sof_client_dev *cdev = ancillary_dev_to_sof_client_dev(ancildev);
+	struct sof_ipc_client_data *ipc_client_data;
+
+	/*
+	 * The ancillary device has a usage count of 0 even before runtime PM
+	 * is enabled. So, increment the usage count to let the device
+	 * suspend after probe is complete.
+	 */
+	pm_runtime_get_noresume(&ancildev->dev);
+
+	/* allocate memory for client data */
+	ipc_client_data = devm_kzalloc(&ancildev->dev, sizeof(*ipc_client_data), GFP_KERNEL);
+	if (!ipc_client_data)
+		return -ENOMEM;
+
+	ipc_client_data->buf = devm_kzalloc(&ancildev->dev, IPC_FLOOD_TEST_RESULT_LEN, GFP_KERNEL);
+	if (!ipc_client_data->buf)
+		return -ENOMEM;
+
+	cdev->data = ipc_client_data;
+
+	/* create debugfs root folder with device name under parent SOF dir */
+	ipc_client_data->dfs_root = debugfs_create_dir(dev_name(&ancildev->dev),
+						       sof_client_get_debugfs_root(cdev));
+
+	/* create read-write ipc_flood_count debugfs entry */
+	debugfs_create_file("ipc_flood_count", 0644, ipc_client_data->dfs_root,
+			    cdev, &sof_ipc_dfs_fops);
+
+	/* create read-write ipc_flood_duration_ms debugfs entry */
+	debugfs_create_file("ipc_flood_duration_ms", 0644, ipc_client_data->dfs_root,
+			    cdev, &sof_ipc_dfs_fops);
+
+	/* enable runtime PM */
+	pm_runtime_set_autosuspend_delay(&ancildev->dev, SOF_IPC_CLIENT_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(&ancildev->dev);
+	pm_runtime_set_active(&ancildev->dev);
+	pm_runtime_enable(&ancildev->dev);
+	pm_runtime_mark_last_busy(&ancildev->dev);
+	pm_runtime_put_autosuspend(&ancildev->dev);
+
+	return 0;
+}
+
+static int sof_ipc_test_cleanup(struct ancillary_device *ancildev)
+{
+	struct sof_client_dev *cdev = ancillary_dev_to_sof_client_dev(ancildev);
+	struct sof_ipc_client_data *ipc_client_data = cdev->data;
+
+	pm_runtime_disable(&ancildev->dev);
+
+	debugfs_remove_recursive(ipc_client_data->dfs_root);
+
+	return 0;
+}
+
+static int sof_ipc_test_remove(struct ancillary_device *ancildev)
+{
+	return sof_ipc_test_cleanup(ancildev);
+}
+
+static void sof_ipc_test_shutdown(struct ancillary_device *ancildev)
+{
+	sof_ipc_test_cleanup(ancildev);
+}
+
+static const struct ancillary_device_id sof_ipc_ancilbus_id_table[] = {
+	{ .name = "snd_sof_client.ipc_test" },
+	{},
+};
+MODULE_DEVICE_TABLE(ancillary, sof_ipc_ancilbus_id_table);
+
+/*
+ * No need for driver pm_ops as the generic pm callbacks in the ancillary bus type are enough to
+ * ensure that the parent SOF device resumes to bring the DSP back to D0.
+ */
+static struct sof_client_drv sof_ipc_test_client_drv = {
+	.name = "sof-ipc-test-client-drv",
+	.ancillary_drv = {
+		.driver = {
+			.name = "sof-ipc-test-ancilbus-drv",
+		},
+		.id_table = sof_ipc_ancilbus_id_table,
+		.probe = sof_ipc_test_probe,
+		.remove = sof_ipc_test_remove,
+		.shutdown = sof_ipc_test_shutdown,
+	},
+};
+
+module_sof_client_driver(sof_ipc_test_client_drv);
+
+MODULE_DESCRIPTION("SOF IPC Test Client Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SND_SOC_SOF_CLIENT);
-- 
2.26.2


  parent reply	other threads:[~2020-10-05 19:32 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-05 18:24 [PATCH v2 0/6] Ancillary bus implementation and SOF multi-client support Dave Ertman
2020-10-05 18:24 ` [PATCH v2 1/6] Add ancillary bus support Dave Ertman
2020-10-06  7:18   ` Leon Romanovsky
2020-10-06 15:18     ` Pierre-Louis Bossart
2020-10-06 17:02       ` Leon Romanovsky
2020-10-06 17:09         ` Parav Pandit
2020-10-06 17:26           ` Leon Romanovsky
2020-10-06 17:41             ` Saleem, Shiraz
2020-10-06 19:20               ` Leon Romanovsky
2020-10-07  2:49                 ` Dan Williams
2020-10-07 13:09                   ` Saleem, Shiraz
2020-10-07 13:36                     ` Leon Romanovsky
2020-10-07 18:55                       ` Dan Williams
2020-10-07 20:01                         ` Ertman, David M
2020-10-06 18:35             ` Ranjani Sridharan
2020-10-06 17:50         ` Saleem, Shiraz
2020-10-07 18:06         ` Ertman, David M
2020-10-07 19:26           ` Leon Romanovsky
2020-10-07 19:53             ` Ertman, David M
2020-10-07 19:57               ` Ertman, David M
2020-10-07 20:17             ` Parav Pandit
2020-10-07 20:46               ` Ertman, David M
2020-10-07 20:59                 ` Pierre-Louis Bossart
2020-10-07 21:22                   ` Ertman, David M
2020-10-07 21:49                     ` Pierre-Louis Bossart
2020-10-08  4:56                       ` Parav Pandit
2020-10-08  5:26                         ` Leon Romanovsky
2020-10-08  7:14                           ` Parav Pandit
2020-10-08  7:45                             ` Leon Romanovsky
2020-10-08  9:45                               ` Parav Pandit
2020-10-08 10:17                                 ` Leon Romanovsky
2020-10-08 13:29                         ` Pierre-Louis Bossart
2020-10-09 11:40                           ` Leon Romanovsky
2020-10-08 16:54                         ` Ertman, David M
2020-10-08 17:35                           ` Parav Pandit
2020-10-08 18:13                             ` Ertman, David M
2020-10-08  5:21                 ` Leon Romanovsky
2020-10-08  6:32                   ` Dan Williams
2020-10-08  7:00                     ` Leon Romanovsky
2020-10-08  7:38                       ` Dan Williams
2020-10-08  7:50                         ` gregkh
2020-10-08 11:10                           ` Parav Pandit
2020-10-08 16:39                             ` Ertman, David M
2020-10-08  8:00                         ` Leon Romanovsky
2020-10-08  8:09                           ` Dan Williams
2020-10-08 16:42                           ` Ertman, David M
2020-10-08 17:21                             ` Leon Romanovsky
2020-10-08 18:25                     ` Ertman, David M
2020-10-07 20:30         ` Ertman, David M
2020-10-07 20:18       ` Ertman, David M
2020-10-06 17:23   ` Leon Romanovsky
2020-10-06 17:45     ` Saleem, Shiraz
2020-10-08 22:04     ` Ertman, David M
2020-10-08 22:41       ` Dan Williams
2020-10-09 14:26         ` Pierre-Louis Bossart
2020-10-09 19:22           ` Dan Williams
2020-10-09 19:39             ` Pierre-Louis Bossart
2020-10-12 18:34               ` Ertman, David M
2020-10-08 17:20   ` Leon Romanovsky
2020-10-08 17:28     ` Ertman, David M
2020-10-05 18:24 ` [PATCH v2 2/6] ASoC: SOF: Introduce descriptors for SOF client Dave Ertman
2020-10-13  1:05   ` Randy Dunlap
2020-10-13  1:31     ` Pierre-Louis Bossart
2020-10-13  1:55       ` Randy Dunlap
2020-10-13  1:56         ` Randy Dunlap
2020-10-13 15:08           ` Pierre-Louis Bossart
2020-10-13 19:35             ` Randy Dunlap
2020-10-13 19:57               ` Pierre-Louis Bossart
2020-10-05 18:24 ` Dave Ertman [this message]
2020-10-05 18:24 ` [PATCH v2 4/6] ASoC: SOF: ops: Add ops for client registration Dave Ertman
2020-10-05 18:24 ` [PATCH v2 5/6] ASoC: SOF: Intel: Define " Dave Ertman
2020-10-05 18:24 ` [PATCH v2 6/6] ASoC: SOF: debug: Remove IPC flood test support in SOF core Dave Ertman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201005182446.977325-4-david.m.ertman@intel.com \
    --to=david.m.ertman@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=dan.j.williams@intel.com \
    --cc=davem@davemloft.net \
    --cc=dledford@redhat.com \
    --cc=fred.oh@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jgg@nvidia.com \
    --cc=kiran.patil@intel.com \
    --cc=kuba@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=parav@mellanox.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=shiraz.saleem@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).