From: Prabhakar Kushwaha <pkushwaha@marvell.com>
To: <netdev@vger.kernel.org>, <davem@davemloft.net>, <kuba@kernel.org>
Cc: <linux-rdma@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
<martin.petersen@oracle.com>, <aelior@marvell.com>,
<smalin@marvell.com>, <jhasan@marvell.com>,
<mrangankar@marvell.com>, <pkushwaha@marvell.com>,
<prabhakar.pkin@gmail.com>, <malin1024@gmail.com>,
Omkar Kulkarni <okulkarni@marvell.com>
Subject: [PATCH v2 04/13] qed: Update common_hsi for FW ver 8.59.1.0
Date: Mon, 4 Oct 2021 09:58:42 +0300 [thread overview]
Message-ID: <20211004065851.1903-5-pkushwaha@marvell.com> (raw)
In-Reply-To: <20211004065851.1903-1-pkushwaha@marvell.com>
The common_hsi.h has been updated for FW version 8.59.1.0 with below
changes.
- FW and Tools version.
- New structures related to search table, packet duplication.
- Structure for doorbell address for legacy mode without DEM.
- Enhanced union rdma_eqe_data for RoCE Suspend Event Data.
- New defines.
This patch also fixes the existing checkpatch warnings and few important
checks.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
---
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 2 +-
include/linux/qed/common_hsi.h | 113 ++++++++++++++++++++--
2 files changed, 106 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
index 987b086811b7..68eaef8ab6e8 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
@@ -1093,7 +1093,7 @@ enum malicious_vf_error_id {
/* Mstorm non-triggering VF zone */
struct mstorm_non_trigger_vf_zone {
struct eth_mstorm_per_queue_stat eth_queue_stat;
- struct eth_rx_prod_data eth_rx_queue_producers[ETH_MAX_NUM_RX_QUEUES_PER_VF_QUAD];
+ struct eth_rx_prod_data eth_rx_queue_producers[ETH_MAX_RXQ_VF_QUAD];
};
/* Mstorm VF zone */
diff --git a/include/linux/qed/common_hsi.h b/include/linux/qed/common_hsi.h
index 3742d1f7d1f7..827624840ee2 100644
--- a/include/linux/qed/common_hsi.h
+++ b/include/linux/qed/common_hsi.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
/* QLogic qed NIC Driver
* Copyright (c) 2015-2016 QLogic Corporation
- * Copyright (c) 2019-2020 Marvell International Ltd.
+ * Copyright (c) 2019-2021 Marvell International Ltd.
*/
#ifndef _COMMON_HSI_H
@@ -47,10 +47,10 @@
#define ISCSI_CDU_TASK_SEG_TYPE 0
#define FCOE_CDU_TASK_SEG_TYPE 0
#define RDMA_CDU_TASK_SEG_TYPE 1
+#define ETH_CDU_TASK_SEG_TYPE 2
#define FW_ASSERT_GENERAL_ATTN_IDX 32
-
/* Queue Zone sizes in bytes */
#define TSTORM_QZONE_SIZE 8
#define MSTORM_QZONE_SIZE 16
@@ -60,9 +60,12 @@
#define PSTORM_QZONE_SIZE 0
#define MSTORM_VF_ZONE_DEFAULT_SIZE_LOG 7
-#define ETH_MAX_NUM_RX_QUEUES_PER_VF_DEFAULT 16
-#define ETH_MAX_NUM_RX_QUEUES_PER_VF_DOUBLE 48
-#define ETH_MAX_NUM_RX_QUEUES_PER_VF_QUAD 112
+#define ETH_MAX_RXQ_VF_DEFAULT 16
+#define ETH_MAX_RXQ_VF_DOUBLE 48
+#define ETH_MAX_RXQ_VF_QUAD 112
+
+#define ETH_RGSRC_CTX_SIZE 6
+#define ETH_TGSRC_CTX_SIZE 6
/********************************/
/* CORE (LIGHT L2) FW CONSTANTS */
@@ -89,8 +92,8 @@
#define MAX_NUM_LL2_TX_STATS_COUNTERS 48
#define FW_MAJOR_VERSION 8
-#define FW_MINOR_VERSION 42
-#define FW_REVISION_VERSION 2
+#define FW_MINOR_VERSION 59
+#define FW_REVISION_VERSION 1
#define FW_ENGINEERING_VERSION 0
/***********************/
@@ -112,6 +115,7 @@
#define MAX_NUM_VFS (MAX_NUM_VFS_K2)
#define MAX_NUM_FUNCTIONS_BB (MAX_NUM_PFS_BB + MAX_NUM_VFS_BB)
+#define MAX_NUM_FUNCTIONS_K2 (MAX_NUM_PFS_K2 + MAX_NUM_VFS_K2)
#define MAX_FUNCTION_NUMBER_BB (MAX_NUM_PFS + MAX_NUM_VFS_BB)
#define MAX_FUNCTION_NUMBER_K2 (MAX_NUM_PFS + MAX_NUM_VFS_K2)
@@ -144,7 +148,7 @@
#define GTT_DWORD_SIZE BIT(GTT_DWORD_SIZE_BITS)
/* Tools Version */
-#define TOOLS_VERSION 10
+#define TOOLS_VERSION 11
/*****************/
/* CDU CONSTANTS */
@@ -162,6 +166,7 @@
#define CDU_CONTEXT_VALIDATION_CFG_USE_REGION (3)
#define CDU_CONTEXT_VALIDATION_CFG_USE_CID (4)
#define CDU_CONTEXT_VALIDATION_CFG_USE_ACTIVE (5)
+#define CDU_CONTEXT_VALIDATION_DEFAULT_CFG (0x3d)
/*****************/
/* DQ CONSTANTS */
@@ -302,6 +307,9 @@
/* PWM address mapping */
#define DQ_PWM_OFFSET_DPM_BASE 0x0
#define DQ_PWM_OFFSET_DPM_END 0x27
+#define DQ_PWM_OFFSET_XCM32_24ICID_BASE 0x28
+#define DQ_PWM_OFFSET_UCM32_24ICID_BASE 0x30
+#define DQ_PWM_OFFSET_TCM32_24ICID_BASE 0x38
#define DQ_PWM_OFFSET_XCM16_BASE 0x40
#define DQ_PWM_OFFSET_XCM32_BASE 0x44
#define DQ_PWM_OFFSET_UCM16_BASE 0x48
@@ -325,6 +333,13 @@
#define DQ_PWM_OFFSET_TCM_LL2_PROD_UPDATE \
(DQ_PWM_OFFSET_TCM32_BASE + DQ_TCM_AGG_VAL_SEL_REG9 - 4)
+#define DQ_PWM_OFFSET_XCM_RDMA_24B_ICID_SQ_PROD \
+ (DQ_PWM_OFFSET_XCM32_24ICID_BASE + 2)
+#define DQ_PWM_OFFSET_UCM_RDMA_24B_ICID_CQ_CONS_32BIT \
+ (DQ_PWM_OFFSET_UCM32_24ICID_BASE + 4)
+#define DQ_PWM_OFFSET_TCM_ROCE_24B_ICID_RQ_PROD \
+ (DQ_PWM_OFFSET_TCM32_24ICID_BASE + 1)
+
#define DQ_REGION_SHIFT (12)
/* DPM */
@@ -360,6 +375,7 @@
/* Number of global Vport/QCN rate limiters */
#define MAX_QM_GLOBAL_RLS 256
+#define COMMON_MAX_QM_GLOBAL_RLS MAX_QM_GLOBAL_RLS
/* QM registers data */
#define QM_LINE_CRD_REG_WIDTH 16
@@ -700,6 +716,13 @@ enum mf_mode {
MAX_MF_MODE
};
+/* Per protocol packet duplication enable bit vector. If set, duplicate
+ * offloaded traffic to LL2 debug queueu.
+ */
+struct offload_pkt_dup_enable {
+ __le16 enable_vector;
+};
+
/* Per-protocol connection types */
enum protocol_type {
PROTOCOLID_TCP_ULP,
@@ -717,6 +740,12 @@ enum protocol_type {
MAX_PROTOCOL_TYPE
};
+/* Pstorm packet duplication config */
+struct pstorm_pkt_dup_cfg {
+ struct offload_pkt_dup_enable enable;
+ __le16 reserved[3];
+};
+
struct regpair {
__le32 lo;
__le32 hi;
@@ -728,10 +757,24 @@ struct rdma_eqe_destroy_qp {
u8 reserved[4];
};
+/* RoCE Suspend Event Data */
+struct rdma_eqe_suspend_qp {
+ __le32 cid;
+ u8 reserved[4];
+};
+
/* RDMA Event Data Union */
union rdma_eqe_data {
struct regpair async_handle;
struct rdma_eqe_destroy_qp rdma_destroy_qp_data;
+ struct rdma_eqe_suspend_qp rdma_suspend_qp_data;
+};
+
+/* Tstorm packet duplication config */
+struct tstorm_pkt_dup_cfg {
+ struct offload_pkt_dup_enable enable;
+ __le16 reserved;
+ __le32 cid;
};
struct tstorm_queue_zone {
@@ -891,6 +934,15 @@ struct db_legacy_addr {
#define DB_LEGACY_ADDR_ICID_SHIFT 5
};
+/* Structure for doorbell address, in legacy mode, without DEMS */
+struct db_legacy_wo_dems_addr {
+ __le32 addr;
+#define DB_LEGACY_WO_DEMS_ADDR_RESERVED0_MASK 0x3
+#define DB_LEGACY_WO_DEMS_ADDR_RESERVED0_SHIFT 0
+#define DB_LEGACY_WO_DEMS_ADDR_ICID_MASK 0x3FFFFFFF
+#define DB_LEGACY_WO_DEMS_ADDR_ICID_SHIFT 2
+};
+
/* Structure for doorbell address, in PWM mode */
struct db_pwm_addr {
__le32 addr;
@@ -906,6 +958,31 @@ struct db_pwm_addr {
#define DB_PWM_ADDR_RESERVED1_SHIFT 28
};
+/* Parameters to RDMA firmware, passed in EDPM doorbell */
+struct db_rdma_24b_icid_dpm_params {
+ __le32 params;
+#define DB_RDMA_24B_ICID_DPM_PARAMS_SIZE_MASK 0x3F
+#define DB_RDMA_24B_ICID_DPM_PARAMS_SIZE_SHIFT 0
+#define DB_RDMA_24B_ICID_DPM_PARAMS_DPM_TYPE_MASK 0x3
+#define DB_RDMA_24B_ICID_DPM_PARAMS_DPM_TYPE_SHIFT 6
+#define DB_RDMA_24B_ICID_DPM_PARAMS_OPCODE_MASK 0xFF
+#define DB_RDMA_24B_ICID_DPM_PARAMS_OPCODE_SHIFT 8
+#define DB_RDMA_24B_ICID_DPM_PARAMS_ICID_EXT_MASK 0xFF
+#define DB_RDMA_24B_ICID_DPM_PARAMS_ICID_EXT_SHIFT 16
+#define DB_RDMA_24B_ICID_DPM_PARAMS_INV_BYTE_CNT_MASK 0x7
+#define DB_RDMA_24B_ICID_DPM_PARAMS_INV_BYTE_CNT_SHIFT 24
+#define DB_RDMA_24B_ICID_DPM_PARAMS_EXT_ICID_MODE_EN_MASK 0x1
+#define DB_RDMA_24B_ICID_DPM_PARAMS_EXT_ICID_MODE_EN_SHIFT 27
+#define DB_RDMA_24B_ICID_DPM_PARAMS_COMPLETION_FLG_MASK 0x1
+#define DB_RDMA_24B_ICID_DPM_PARAMS_COMPLETION_FLG_SHIFT 28
+#define DB_RDMA_24B_ICID_DPM_PARAMS_S_FLG_MASK 0x1
+#define DB_RDMA_24B_ICID_DPM_PARAMS_S_FLG_SHIFT 29
+#define DB_RDMA_24B_ICID_DPM_PARAMS_RESERVED1_MASK 0x1
+#define DB_RDMA_24B_ICID_DPM_PARAMS_RESERVED1_SHIFT 30
+#define DB_RDMA_24B_ICID_DPM_PARAMS_CONN_TYPE_IS_IWARP_MASK 0x1
+#define DB_RDMA_24B_ICID_DPM_PARAMS_CONN_TYPE_IS_IWARP_SHIFT 31
+};
+
/* Parameters to RDMA firmware, passed in EDPM doorbell */
struct db_rdma_dpm_params {
__le32 params;
@@ -1220,6 +1297,26 @@ struct rdif_task_context {
__le32 reserved2;
};
+/* Searcher Table struct */
+struct src_entry_header {
+ __le32 flags;
+#define SRC_ENTRY_HEADER_NEXT_PTR_TYPE_MASK 0x1
+#define SRC_ENTRY_HEADER_NEXT_PTR_TYPE_SHIFT 0
+#define SRC_ENTRY_HEADER_EMPTY_MASK 0x1
+#define SRC_ENTRY_HEADER_EMPTY_SHIFT 1
+#define SRC_ENTRY_HEADER_RESERVED_MASK 0x3FFFFFFF
+#define SRC_ENTRY_HEADER_RESERVED_SHIFT 2
+ __le32 magic_number;
+ struct regpair next_ptr;
+};
+
+/* Enumeration for address type */
+enum src_header_next_ptr_type_enum {
+ e_physical_addr,
+ e_logical_addr,
+ MAX_SRC_HEADER_NEXT_PTR_TYPE_ENUM
+};
+
/* Status block structure */
struct status_block {
__le16 pi_array[PIS_PER_SB];
--
2.24.1
next prev parent reply other threads:[~2021-10-04 6:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-04 6:58 [PATCH v2 00/13] qed: new firmware version 8.59.1.0 support Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 01/13] qed: Fix kernel-doc warnings Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 02/13] qed: Remove e4_ and _e4 from FW HSI Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 03/13] qed: Split huge qed_hsi.h header file Prabhakar Kushwaha
2021-10-04 6:58 ` Prabhakar Kushwaha [this message]
2021-10-04 6:58 ` [PATCH v2 05/13] qed: Update qed_mfw_hsi.h for FW ver 8.59.1.0 Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 06/13] qed: Update qed_hsi.h for fw 8.59.1.0 Prabhakar Kushwaha
2021-10-07 11:32 ` Naresh Kamboju
2021-10-04 6:58 ` [PATCH v2 07/13] qed: Use enum as per FW 8.59.1.0 in qed_iro_hsi.h Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 08/13] qed: Update FW init functions to support FW 8.59.1.0 Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 09/13] qed: Add '_GTT' suffix to the IRO RAM macros Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 10/13] qed: Update debug related changes Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 11/13] qed: Update TCP silly-window-syndrome timeout for iwarp, scsi Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 12/13] qed: Update the TCP active termination 2 MSL timer ("TIME_WAIT") Prabhakar Kushwaha
2021-10-04 6:58 ` [PATCH v2 13/13] qed: fix ll2 establishment during load of RDMA driver Prabhakar Kushwaha
2021-10-04 12:20 ` [PATCH v2 00/13] qed: new firmware version 8.59.1.0 support patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211004065851.1903-5-pkushwaha@marvell.com \
--to=pkushwaha@marvell.com \
--cc=aelior@marvell.com \
--cc=davem@davemloft.net \
--cc=jhasan@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=malin1024@gmail.com \
--cc=martin.petersen@oracle.com \
--cc=mrangankar@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=okulkarni@marvell.com \
--cc=prabhakar.pkin@gmail.com \
--cc=smalin@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).