From: Bob Pearson <rpearsonhpe@gmail.com>
To: jgg@nvidia.com, leon@kernel.org, zyjzyj2000@gmail.com,
linux-rdma@vger.kernel.org
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Subject: [PATCH for-next v2 17/18] RDMA/rxe: Extend do_read() in rxe_comp,c for frags
Date: Mon, 31 Oct 2022 15:28:06 -0500 [thread overview]
Message-ID: <20221031202805.19138-17-rpearsonhpe@gmail.com> (raw)
In-Reply-To: <20221031202805.19138-1-rpearsonhpe@gmail.com>
Extend do_read() in rxe_comp.c to support fragmented skbs.
Rename rxe_do_read(). Adjust caller's API.
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
---
drivers/infiniband/sw/rxe/rxe_comp.c | 40 ++++++++++++++++++----------
1 file changed, 26 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_comp.c b/drivers/infiniband/sw/rxe/rxe_comp.c
index 3c1ecc88446d..85b3a4a6b55b 100644
--- a/drivers/infiniband/sw/rxe/rxe_comp.c
+++ b/drivers/infiniband/sw/rxe/rxe_comp.c
@@ -348,22 +348,34 @@ static inline enum comp_state check_ack(struct rxe_qp *qp,
return COMPST_ERROR;
}
-static inline enum comp_state do_read(struct rxe_qp *qp,
- struct rxe_pkt_info *pkt,
- struct rxe_send_wqe *wqe)
+/**
+ * rxe_do_read() - Process read reply packet
+ * @qp: The queue pair
+ * @pkt: Packet info
+ * @wqe: The current work request
+ *
+ * Copy payload from incoming read reply packet into current
+ * iova.
+ *
+ * Returns: 0 on success else an error comp_state
+ */
+static inline enum comp_state rxe_do_read(struct rxe_qp *qp,
+ struct rxe_pkt_info *pkt,
+ struct rxe_send_wqe *wqe)
{
struct sk_buff *skb = PKT_TO_SKB(pkt);
- int skb_offset = 0;
- int ret;
-
- ret = rxe_copy_dma_data(skb, qp->pd, IB_ACCESS_LOCAL_WRITE,
- &wqe->dma, payload_addr(pkt),
- skb_offset, payload_size(pkt),
- RXE_COPY_TO_MR);
- if (ret) {
- wqe->status = IB_WC_LOC_PROT_ERR;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ u8 *data_addr = payload_addr(pkt);
+ int data_len = payload_size(pkt);
+ enum rxe_mr_copy_op op = nr_frags ? RXE_FRAG_TO_MR : RXE_COPY_TO_MR;
+ int skb_offset = data_addr - skb_transport_header(skb);
+ int err;
+
+ err = rxe_copy_dma_data(skb, qp->pd, IB_ACCESS_LOCAL_WRITE,
+ &wqe->dma, data_addr,
+ skb_offset, data_len, op);
+ if (err)
return COMPST_ERROR;
- }
if (wqe->dma.resid == 0 && (pkt->mask & RXE_END_MASK))
return COMPST_COMP_ACK;
@@ -625,7 +637,7 @@ int rxe_completer(void *arg)
break;
case COMPST_READ:
- state = do_read(qp, pkt, wqe);
+ state = rxe_do_read(qp, pkt, wqe);
break;
case COMPST_ATOMIC:
--
2.34.1
next prev parent reply other threads:[~2022-10-31 20:29 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-31 20:27 [PATCH for-next v2 01/18] RDMA/rxe: Isolate code to fill request roce headers Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 02/18] RDMA/rxe: Isolate request payload code in a subroutine Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 03/18] RDMA/rxe: Remove paylen parameter from rxe_init_packet Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 04/18] RDMA/rxe: Isolate code to build request packet Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 05/18] RDMA/rxe: Add sg fragment ops Bob Pearson
2022-11-24 19:05 ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 06/18] RDMA/rxe: Add rxe_add_frag() to rxe_mr.c Bob Pearson
2022-11-24 19:10 ` Jason Gunthorpe
2022-11-30 20:53 ` Bob Pearson
2022-11-30 23:36 ` Jason Gunthorpe
2022-12-01 0:16 ` Bob Pearson
2022-12-01 0:20 ` Jason Gunthorpe
2022-12-01 0:36 ` Bob Pearson
2022-12-01 0:41 ` Jason Gunthorpe
2022-12-01 5:05 ` Bob Pearson
2022-12-01 12:51 ` Jason Gunthorpe
2022-12-01 15:04 ` Bob Pearson
2022-12-01 15:16 ` Bob Pearson
2022-12-01 15:38 ` Bob Pearson
2022-12-01 15:39 ` Jason Gunthorpe
2022-12-01 17:11 ` Bob Pearson
2022-12-01 18:00 ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 07/18] RDMA/rxe: Add routine to compute the number of frags Bob Pearson
2022-11-24 19:15 ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 08/18] RDMA/rxe: Extend rxe_mr_copy to support skb frags Bob Pearson
2022-10-31 20:27 ` [PATCH for-next v2 09/18] RDMA/rxe: Add routine to compute number of frags for dma Bob Pearson
2022-11-24 19:16 ` Jason Gunthorpe
2022-10-31 20:27 ` [PATCH for-next v2 10/18] RDMA/rxe: Extend copy_data to support skb frags Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 11/18] RDMA/rxe: Replace rxe by qp as a parameter Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 12/18] RDMA/rxe: Extend rxe_init_packet() to support frags Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 13/18] RDMA/rxe: Extend rxe_icrc.c " Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 14/18] RDMA/rxe: Extend rxe_init_req_packet() for frags Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 15/18] RDMA/rxe: Extend response packets " Bob Pearson
2022-10-31 20:28 ` [PATCH for-next v2 16/18] RDMA/rxe: Extend send/write_data_in() " Bob Pearson
2022-10-31 20:28 ` Bob Pearson [this message]
2022-10-31 20:28 ` [PATCH for-next v2 18/18] RDMA/rxe: Enable sg code in rxe Bob Pearson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221031202805.19138-17-rpearsonhpe@gmail.com \
--to=rpearsonhpe@gmail.com \
--cc=jgg@nvidia.com \
--cc=leon@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).