Linux-RDMA Archive on lore.kernel.org
 help / color / Atom feed
* Hang at NVME Host caused by Controller reset
@ 2020-07-27 18:19 Krishnamraju Eraparaju
  2020-07-27 18:47 ` Sagi Grimberg
  0 siblings, 1 reply; 8+ messages in thread
From: Krishnamraju Eraparaju @ 2020-07-27 18:19 UTC (permalink / raw)
  To: linux-nvme; +Cc: linux-rdma


kernel hang observed on NVME Host(TCP) while running iozone with link
toggle:

    
[ +42.773018] INFO: task kworker/u24:5:1243 blocked for more than 122
seconds.
[  +0.000124]       Not tainted 5.8.0-rc4ekr+ #19
[  +0.000105] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[  +0.000164] kworker/u24:5   D12600  1243      2 0x00004000
[  +0.000114] Workqueue: nvme-reset-wq nvme_reset_ctrl_work [nvme_tcp]
[  +0.000109] Call Trace:
[  +0.000105]  __schedule+0x270/0x5d0
[  +0.000105]  schedule+0x45/0xb0
[  +0.000125]  blk_mq_freeze_queue_wait+0x41/0xa0
[  +0.000122]  ? wait_woken+0x80/0x80
[  +0.000116]  blk_mq_update_nr_hw_queues+0x8a/0x380
[  +0.000109]  nvme_tcp_setup_ctrl+0x345/0x510 [nvme_tcp]
[  +0.000108]  nvme_reset_ctrl_work+0x45/0x60 [nvme_tcp]
[  +0.000135]  process_one_work+0x149/0x380
[  +0.000107]  worker_thread+0x1ae/0x3a0
[  +0.000107]  ? process_one_work+0x380/0x380
[  +0.000108]  kthread+0xf7/0x130
[  +0.000135]  ? kthread_bind+0x10/0x10
[  +0.000121]  ret_from_fork+0x22/0x30
[  +0.000134] INFO: task bash:6000 blocked for more than 122 seconds.
[  +0.000122]       Not tainted 5.8.0-rc4ekr+ #19
[  +0.000109] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[  +0.000195] bash            D14232  6000   5967 0x00000080
[  +0.000115] Call Trace:
[  +0.000106]  __schedule+0x270/0x5d0
[  +0.000138]  ? terminate_walk+0x8a/0x90
[  +0.000123]  schedule+0x45/0xb0
[  +0.000108]  schedule_timeout+0x1d6/0x290
[  +0.000121]  wait_for_completion+0x82/0xe0
[  +0.000120]  __flush_work.isra.37+0x10c/0x180
[  +0.000115]  ? flush_workqueue_prep_pwqs+0x110/0x110
[  +0.000119]  nvme_reset_ctrl_sync+0x1c/0x30 [nvme_core]
[  +0.000110]  nvme_sysfs_reset+0xd/0x20 [nvme_core]
[  +0.000137]  kernfs_fop_write+0x10a/0x1a0
[  +0.000124]  vfs_write+0xa8/0x1a0
[  +0.000122]  ksys_write+0x50/0xc0
[  +0.000117]  do_syscall_64+0x3e/0x70
[  +0.000108]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  +0.000111] RIP: 0033:0x7f4ed689dc60
[  +0.000107] Code: Bad RIP value.
[  +0.000105] RSP: 002b:00007ffe636b6fe8 EFLAGS: 00000246 ORIG_RAX:
0000000000000001
[  +0.000188] RAX: ffffffffffffffda RBX: 0000000000000002 RCX:
00007f4ed689dc60
----

This issue got uncovered after commit fe35ec58f0d3, which does
freeze-queue operation if set->nr_maps is greater than '1'(all nvmef
trasnports sets nr_maps to '2' by default). 
  
Issue will not occur with multipath enabled.
Issue observed with RDMA transports also.

Steps to reproduce: 
nvme connect -t tcp -a 102.1.1.6 -s 4420 -n nvme-ram0 -i 1

Run below each while loop in different terminals parallelly, to reprodue
instantaneously.
while [ 1 ]; do echo 1 > /sys/block/nvme0n1/device/reset_controller;
done
while [ 1 ]; do  nvme write-zeroes /dev/nvme0n1 -s 1 -c 1; done



My understanding is: while performing reset-controller, nvme-write task
tries to submit IO/blk_queue_enter, but fails at blk_mq_run_hw_queue()
after seeing blk_queue_quiesced.
And never succeeded to blk_queue_exit, may be due to out-of-sync percpu
counter operations(q_usage_counter), causing this hang at freeze_queue.

Thanks,
Krishna.

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-27 18:19 Hang at NVME Host caused by Controller reset Krishnamraju Eraparaju
2020-07-27 18:47 ` Sagi Grimberg
2020-07-28 11:59   ` Krishnamraju Eraparaju
2020-07-28 15:54     ` Sagi Grimberg
2020-07-28 17:42       ` Krishnamraju Eraparaju
2020-07-28 18:35         ` Sagi Grimberg
2020-07-28 20:20           ` Sagi Grimberg
2020-07-29  8:57             ` Krishnamraju Eraparaju

Linux-RDMA Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rdma/0 linux-rdma/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rdma linux-rdma/ https://lore.kernel.org/linux-rdma \
		linux-rdma@vger.kernel.org
	public-inbox-index linux-rdma

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rdma


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git