Linux-RDMA Archive on lore.kernel.org
 help / color / Atom feed
From: Tom Talpey <tom@talpey.com>
To: Mark Zhang <markz@mellanox.com>, Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alex Rosenbaum <rosenbaumalex@gmail.com>,
	RDMA mailing list <linux-rdma@vger.kernel.org>,
	Eran Ben Elisha <eranbe@mellanox.com>,
	Yishai Hadas <yishaih@mellanox.com>,
	"Alex @ Mellanox" <alexr@mellanox.com>,
	Maor Gottlieb <maorg@mellanox.com>,
	Leon Romanovsky <leonro@mellanox.com>
Subject: Re: [RFC v2] RoCE v2.0 Entropy - IPv6 Flow Label and UDP Source Port
Date: Tue, 18 Feb 2020 09:16:31 -0500
Message-ID: <55e8c9cf-cd64-27b2-1333-ac4849f5e3ff@talpey.com> (raw)
In-Reply-To: <de3aeeb7-41ef-fadc-7865-e3e9fc005476@mellanox.com>

On 2/15/2020 1:27 AM, Mark Zhang wrote:
> On 2/14/2020 10:23 PM, Mark Zhang wrote:
>> On 2/13/2020 11:41 PM, Jason Gunthorpe wrote:
>>> On Thu, Feb 13, 2020 at 10:26:09AM -0500, Tom Talpey wrote:
>>>
>>>>> If both src & dst ports are in the high value range you loss those
>>>>> hash bits in the masking.
>>>>> If src & dst port are both 0xE000, your masked hash equals 0. You'll
>>>>> get the same hash if both ports are equal 0xF000.
>>>>
>>>> Sure, but this is because it's a 20-bit hash of a 32-bit object. There
>>>> will always be collisions, this is just one example. My concern is the
>>>> statistical spread of the results. I argue it's not changed by the
>>>> proposed bit-folding, possibly even damaged.
>>>
>>> I've always thought that 'folding' by modulo results in an abnormal
>>> statistical distribution
>>>
>>> The point here is not collisions but to have a hash distribution which
>>> is generally uniform for the input space.
>>>
>>> Alex, it would be good to make a quick program to measure the
>>> uniformity of the distribution..
>>>
>>
>> Hi,
>>
>> I did some tests with a quick program (hope it's not buggy...), seems 
>> the hash without "folding" has a better distribution than hash with 
>> fold. The "hash quality" is reflected by the "total_access"[1] below.
>>
>> I tested only with cma_dport from 18515 (ib_write_bw default) to 
>> 18524. I can do more tests if required, for example use multiple 
>> cma_dport in one statistic.
>>
>>
>> [1] 
>> https://stackoverflow.com/questions/24729730/measuring-a-hash-functions-quality-for-use-with-maps-assosiative-arrays 
>>
>>
>> $ ./a
>>
>> max: Say for slot x there are tb[x] items, then 'max = max(tb[x])'; 
>> Lower is better;
>> min: Say for slot x there are tb[x] items, then 'min = min(tb[x])'; 
>> Likely min is always 0
>> total_access: The sum of all 'accesses' (for each slot: 
>> accesses=n*(n+1)/2); Lower is better
>> n[X]: How many slots that has X items
>>
>> cm source port range [32768, 65534], dest port 18515:
>> Hash with folding:
>>      flow_label: max 2 min 0 total_access 32766  n[1] = 32514 n[2] = 126
>>      udp_sport: max 10 min 0 total_access 51740  n[1] = 4420  n[2] = 
>> 4670  n[3] = 3112  n[4] = 1433  n[5] = 535   n[6] = 163   n[7] = 31 
>> n[8] = 5     n[9] = 2     n[10] = 1
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 4 min 0 total_access 48618   n[1] = 532   n[2] = 
>> 7926  n[3] = 530   n[4] = 3698
>>
>>
>> cm source port range [32768, 65534], dest port 18516:
>> Hash with folding:
>>      flow_label: max 3 min 0 total_access 32774  n[1] = 31214 n[2] = 
>> 770    n[3] = 4
>>      udp_sport: max 8 min 0 total_access 50808   n[1] = 4406  n[2] = 
>> 4873  n[3] = 3157  n[4] = 1413  n[5] = 509   n[6] = 129   n[7] = 20 
>> n[8] = 4
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 2 min 1 total_access 32766   n[1] = 2     n[2] = 
>> 16382
>>
>>
>> cm source port range [32768, 65534], dest port 18517:
>> Hash with folding:
>>      flow_label: max 2 min 0 total_access 32766  n[1] = 32250 n[2] = 258
>>      udp_sport: max 10 min 0 total_access 54916  n[1] = 4536  n[2] = 
>> 4170  n[3] = 2817  n[4] = 1445  n[5] = 622   n[6] = 275   n[7] = 94 
>> n[8] = 22    n[9] = 5     n[10] = 2
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 3 min 1 total_access 38402   n[1] = 2820  n[2] = 
>> 10746 n[3] = 2818
>>
>>
>> cm source port range [32768, 65534], dest port 18518:
>> Hash with folding:
>>      flow_label: max 2 min 0 total_access 32766  n[1] = 32066 n[2] = 350
>>      udp_sport: max 8 min 0 total_access 50018   n[1] = 4435  n[2] = 
>> 4970  n[3] = 3294  n[4] = 1376  n[5] = 465   n[6] = 92    n[7] = 16 
>> n[8] = 2
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 2 min 1 total_access 32766   n[1] = 2     n[2] = 
>> 16382
>>
>>
>> cm source port range [32768, 65534], dest port 18519:
>> Hash with folding:
>>      flow_label: max 3 min 0 total_access 32774  n[1] = 31816 n[2] = 
>> 469    n[3] = 4
>>      udp_sport: max 8 min 0 total_access 51462   n[1] = 4414  n[2] = 
>> 4734  n[3] = 3088  n[4] = 1466  n[5] = 508   n[6] = 160   n[7] = 32 
>> n[8] = 4
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 4 min 0 total_access 45490   n[1] = 3662  n[2] = 
>> 6360  n[3] = 3660  n[4] = 1351
>>
>>
>> cm source port range [32768, 65534], dest port 18520:
>> Hash with folding:
>>      flow_label: max 6 min 0 total_access 34618  n[1] = 20349 n[2] = 
>> 5027  n[3] = 550   n[4] = 164   n[5] = 9     n[6] = 2
>>      udp_sport: max 13 min 0 total_access 82542  n[1] = 549   n[2] = 
>> 1167  n[3] = 1635  n[4] = 1706  n[5] = 1341  n[6] = 836   n[7] = 483 
>> n[8] = 223   n[9] = 87    n[10] = 27
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 4 min 0 total_access 65530 n[3] = 2     n[4] = 8190
>>
>>
>> cm source port range [32768, 65534], dest port 18521:
>> Hash with folding:
>>      flow_label: max 2 min 0 total_access 32766  n[1] = 31924 n[2] = 421
>>      udp_sport: max 9 min 0 total_access 51864   n[1] = 4505  n[2] = 
>> 4645  n[3] = 3038  n[4] = 1464  n[5] = 542   n[6] = 154   n[7] = 43 
>> n[8] = 6     n[9] = 2
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 3 min 1 total_access 32810   n[1] = 24    n[2] = 
>> 16338 n[3] = 22
>>
>>
>> cm source port range [32768, 65534], dest port 18522:
>> Hash with folding:
>>      flow_label: max 3 min 0 total_access 32768  n[1] = 32197 n[2] = 
>> 283    n[3] = 1
>>      udp_sport: max 9 min 0 total_access 50850   n[1] = 4561  n[2] = 
>> 4756  n[3] = 3187  n[4] = 1452  n[5] = 453   n[6] = 137   n[7] = 29 
>> n[8] = 2     n[9] = 2
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 2 min 1 total_access 32766   n[1] = 2     n[2] = 
>> 16382
>>
>>
>> cm source port range [32768, 65534], dest port 18523:
>> Hash with folding:
>>      flow_label: max 2 min 0 total_access 32766  n[1] = 32514 n[2] = 126
>>      udp_sport: max 8 min 0 total_access 52208   n[1] = 4426  n[2] = 
>> 4609  n[3] = 3069  n[4] = 1435  n[5] = 533   n[6] = 180   n[7] = 50 
>> n[8] = 10
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 4 min 0 total_access 46062   n[1] = 3096  n[2] = 
>> 6640  n[3] = 3094  n[4] = 1777
>>
>>
>> cm source port range [32768, 65534], dest port 18524:
>> Hash with folding:
>>      flow_label: max 3 min 0 total_access 32774  n[1] = 31362 n[2] = 
>> 696    n[3] = 4
>>      udp_sport: max 8 min 0 total_access 49490   n[1] = 4440  n[2] = 
>> 5148  n[3] = 3240  n[4] = 1413  n[5] = 394   n[6] = 97    n[7] = 14 
>> n[8] = 1
>> Hash without folding:
>>      flow_label: max 1 min 0 total_access 32766  n[1] = 32766
>>      udp_sport: max 2 min 1 total_access 32766   n[1] = 2     n[2] = 
>> 16382
>>
>>
> 
> Another finding is, when cma_dport is multiple of 0x200 (i.e., 0x600, 
> 0x800, ... 0xFE00), the hash distribution is tens of times worse then 
> others. For examples when dport is 18431 and 18432:
> 
> cm source port range [32768, 65534], dest port 18431:
> Hash with folding:
>      flow_label: max 2 min 0 total_access 32766
>      udp_sport:  max 8 min 0 total_access 50410
> Hash without folding:
>      flow_label: max 1 min 0 total_access 32766
>      udp_sport:  max 4 min 0 total_access 48126
> 
> cm source port range [32768, 65534], dest port 18432(0x4800):
> Hash with folding:
>      flow_label: max 133 min 0 total_access 1072938
> 
>      udp_sport:  max 203 min 0 total_access 2126644
> 
> Hash without folding:
>      flow_label: max 64 min 0   total_access 1048450
> 
>      udp_sport:  max 1024 min 0 total_access 16775170

Good data! It certainly indicates an issue with the simple
binary modulus for treuncating 32->20 bits. But the extremely
narrow testing range limits the conclusions considerably:

 >> I tested only with cma_dport from 18515 (ib_write_bw default) to
 >> 18524. I can do more tests if required, for example use multiple
 >> cma_dport in one statistic.

This hash is intended to provide entropy across the entire port
range and we should evaluate it as such. At a minimum, the source
port can vary much more widely, from Alex's original message it's
0xC000 - 0xFFFF.

> UDP source port selection must adhere IANA port allocation ranges. Thus we will
> be using IANA recommendation for Ephemeral port range of: 49152-65535, or in
> hex: 0xC000-0xFFFF.

I'm not certain what the range of the destination port might be, but
as a Service ID, a good assumption is the full range of 0x1 - 0xBFFF.

Any chance you could scale up your test, to measure the original
proposed hash across these broader ranges?

>   u32 hash = DstPort * SrcPort;
>   hash ^= (hash >> 16);
>   hash ^= (hash >> 8);
>   AH_ATTR.GRH.flow_label = hash AND IB_GRH_FLOWLABEL_MASK;

Tom.






  reply index

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-08 14:26 Alex Rosenbaum
2020-01-15  9:48 ` Mark Zhang
2020-02-06 14:18 ` Tom Talpey
2020-02-06 14:35   ` Jason Gunthorpe
2020-02-06 14:39   ` Alex Rosenbaum
2020-02-06 15:19     ` Tom Talpey
2020-02-08  9:58       ` Alex Rosenbaum
2020-02-12 15:47         ` Tom Talpey
2020-02-13 11:03           ` Alex Rosenbaum
2020-02-13 15:26             ` Tom Talpey
2020-02-13 15:41               ` Jason Gunthorpe
2020-02-14 14:23                 ` Mark Zhang
2020-02-15  6:27                   ` Mark Zhang
2020-02-18 14:16                     ` Tom Talpey [this message]
2020-02-18 17:41                       ` Tom Talpey
2020-02-19  1:51                         ` Mark Zhang
2020-02-19  2:01                           ` Tom Talpey
2020-02-19  2:06                             ` Mark Zhang
2020-02-19 13:06                               ` Jason Gunthorpe
2020-02-19 17:41                                 ` Tom Talpey
2020-02-19 17:55                                   ` Jason Gunthorpe
2020-02-20  1:04                                   ` Mark Zhang
2020-02-21 14:47                                     ` Tom Talpey
2020-02-25 13:20                                       ` Alex Rosenbaum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55e8c9cf-cd64-27b2-1333-ac4849f5e3ff@talpey.com \
    --to=tom@talpey.com \
    --cc=alexr@mellanox.com \
    --cc=eranbe@mellanox.com \
    --cc=jgg@ziepe.ca \
    --cc=leonro@mellanox.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=maorg@mellanox.com \
    --cc=markz@mellanox.com \
    --cc=rosenbaumalex@gmail.com \
    --cc=yishaih@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-RDMA Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-rdma/0 linux-rdma/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-rdma linux-rdma/ https://lore.kernel.org/linux-rdma \
		linux-rdma@vger.kernel.org
	public-inbox-index linux-rdma

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-rdma


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git