linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Alok Prasad <palok@marvell.com>
Cc: jgg@ziepe.ca, dledford@redhat.com, michal.kalderon@marvell.com,
	ariel.elior@marvell.com, smalin@marvell.com,
	linux-rdma@vger.kernel.org, Ariel Elior <aelior@marvell.com>
Subject: Re: [for-rc] RDMA/qedr: qedr crash while running rdma-tool.
Date: Sat, 21 Aug 2021 14:55:37 +0300	[thread overview]
Message-ID: <YSDpuTIsM2gL1h7e@unreal> (raw)
In-Reply-To: <20210821074339.16614-1-palok@marvell.com>

On Sat, Aug 21, 2021 at 07:43:39AM +0000, Alok Prasad wrote:
> This patch fixes crash caused by querying qp.
> This is due the fact that when no traffic is running,
> rdma_create_qp hasn't created any qp hence qed->qp is null.

This description is not correct, all QP creation flows
dev->ops->rdma_create_qp() is called and if qedr_create_qp() successes,
we will have valid qp->qed_qp pointer.

> 
> Below call trace is generated while using iproute2 utility
> "rdma res show -dd qp" on rdma interface.
> 
> ==========================================================================
> [  302.569794] BUG: kernel NULL pointer dereference, address: 0000000000000034
> ..
> [  302.570378] Hardware name: Dell Inc. PowerEdge R720/0M1GCR, BIOS 1.2.6 05/10/2012
> [  302.570500] RIP: 0010:qed_rdma_query_qp+0x33/0x1a0 [qed]
> [  302.570861] RSP: 0018:ffffba560a08f580 EFLAGS: 00010206
> [  302.570979] RAX: 0000000200000000 RBX: ffffba560a08f5b8 RCX: 0000000000000000
> [  302.571100] RDX: ffffba560a08f5b8 RSI: 0000000000000000 RDI: ffff9807ee458090
> [  302.571221] RBP: ffffba560a08f5a0 R08: 0000000000000000 R09: ffff9807890e7048
> [  302.571342] R10: ffffba560a08f658 R11: 0000000000000000 R12: 0000000000000000
> [  302.571462] R13: ffff9807ee458090 R14: ffff9807f0afb000 R15: ffffba560a08f7ec
> [  302.571583] FS:  00007fbbf8bfe740(0000) GS:ffff980aafa00000(0000) knlGS:0000000000000000
> [  302.571729] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  302.571847] CR2: 0000000000000034 CR3: 00000001720ba001 CR4: 00000000000606f0
> [  302.571968] Call Trace:
> [  302.572083]  qedr_query_qp+0x82/0x360 [qedr]
> [  302.572211]  ib_query_qp+0x34/0x40 [ib_core]
> [  302.572361]  ? ib_query_qp+0x34/0x40 [ib_core]
> [  302.572503]  fill_res_qp_entry_query.isra.26+0x47/0x1d0 [ib_core]
> [  302.572670]  ? __nla_put+0x20/0x30
> [  302.572788]  ? nla_put+0x33/0x40
> [  302.572901]  fill_res_qp_entry+0xe3/0x120 [ib_core]
> [  302.573058]  res_get_common_dumpit+0x3f8/0x5d0 [ib_core]
> [  302.573213]  ? fill_res_cm_id_entry+0x1f0/0x1f0 [ib_core]
> [  302.573377]  nldev_res_get_qp_dumpit+0x1a/0x20 [ib_core]
> [  302.573529]  netlink_dump+0x156/0x2f0
> [  302.573648]  __netlink_dump_start+0x1ab/0x260
> [  302.573765]  rdma_nl_rcv+0x1de/0x330 [ib_core]
> [  302.573918]  ? nldev_res_get_cm_id_dumpit+0x20/0x20 [ib_core]
> [  302.574074]  netlink_unicast+0x1b8/0x270
> [  302.574191]  netlink_sendmsg+0x33e/0x470
> [  302.574307]  sock_sendmsg+0x63/0x70
> [  302.574421]  __sys_sendto+0x13f/0x180
> [  302.574536]  ? setup_sgl.isra.12+0x70/0xc0
> [  302.574655]  __x64_sys_sendto+0x28/0x30
> [  302.574769]  do_syscall_64+0x3a/0xb0
> [  302.574884]  entry_SYSCALL_64_after_hwframe+0x44/0xae
> ==========================================================================
> 
> Signed-off-by: Ariel Elior <aelior@marvell.com>
> Signed-off-by: Shai Malin <smalin@marvell.com>
> Signed-off-by: Alok Prasad <palok@marvell.com>
> ---
>  drivers/infiniband/hw/qedr/verbs.c | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c
> index fdc47ef7d861..79603e3fe2db 100644
> --- a/drivers/infiniband/hw/qedr/verbs.c
> +++ b/drivers/infiniband/hw/qedr/verbs.c
> @@ -2758,15 +2758,18 @@ int qedr_query_qp(struct ib_qp *ibqp,
>  	int rc = 0;
>  
>  	memset(&params, 0, sizeof(params));
> -
> -	rc = dev->ops->rdma_query_qp(dev->rdma_ctx, qp->qed_qp, &params);
> -	if (rc)
> -		goto err;
> -

At that point, QP should be valid.

>  	memset(qp_attr, 0, sizeof(*qp_attr));
>  	memset(qp_init_attr, 0, sizeof(*qp_init_attr));
>  
> -	qp_attr->qp_state = qedr_get_ibqp_state(params.state);
> +	if (qp->qed_qp)
> +		rc = dev->ops->rdma_query_qp(dev->rdma_ctx,
> +					     qp->qed_qp, &params);
> +
> +	if (qp->qp_type == IB_QPT_GSI)
> +		qp_attr->qp_state = QED_ROCE_QP_STATE_RTS;
> +	else
> +		qp_attr->qp_state = qedr_get_ibqp_state(params.state);
> +
>  	qp_attr->cur_qp_state = qedr_get_ibqp_state(params.state);
>  	qp_attr->path_mtu = ib_mtu_int_to_enum(params.mtu);
>  	qp_attr->path_mig_state = IB_MIG_MIGRATED;
> @@ -2810,8 +2813,6 @@ int qedr_query_qp(struct ib_qp *ibqp,
>  
>  	DP_DEBUG(dev, QEDR_MSG_QP, "QEDR_QUERY_QP: max_inline_data=%d\n",
>  		 qp_attr->cap.max_inline_data);
> -
> -err:
>  	return rc;
>  }
>  
> -- 
> 2.17.1
> 

  reply	other threads:[~2021-08-21 11:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-21  7:43 [for-rc] RDMA/qedr: qedr crash while running rdma-tool Alok Prasad
2021-08-21 11:55 ` Leon Romanovsky [this message]
2021-08-24  6:19   ` Alok Prasad
2021-10-22 15:49     ` Kamal Heib
2021-10-23 16:48       ` [EXT] " Alok Prasad
2021-08-22  2:45 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YSDpuTIsM2gL1h7e@unreal \
    --to=leon@kernel.org \
    --cc=aelior@marvell.com \
    --cc=ariel.elior@marvell.com \
    --cc=dledford@redhat.com \
    --cc=jgg@ziepe.ca \
    --cc=linux-rdma@vger.kernel.org \
    --cc=michal.kalderon@marvell.com \
    --cc=palok@marvell.com \
    --cc=smalin@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).