Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 0/3] Extend coredump functionality
@ 2020-05-14 20:07 Rishabh Bhatnagar
  2020-05-14 20:07 ` [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Rishabh Bhatnagar @ 2020-05-14 20:07 UTC (permalink / raw)
  To: linux-remoteproc, linux-kernel
  Cc: bjorn.andersson, mathieu.poirier, tsoni, psodagud, sidgup,
	Rishabh Bhatnagar

This patch series moves the coredump functionality to a separate
file and adds "inline" coredump feature. Inline coredump directly
copies segments from device memory during coredump to userspace.
This avoids extra memory usage at the cost of speed. Recovery is
stalled untill all data is read by userspace.

Changelog:

v3 -> v2:
- Move entire coredump functionality to remoteproc_coredump.c
- Modify rproc_coredump to perform dump according to conf. set by userspace
- Move the userspace configuration to debugfs from sysfs.
- Keep the default coredump implementation as is

v2 -> v1:
- Introduce new file for coredump.
- Add userspace sysfs configuration for dump type.

Rishabh Bhatnagar (3):
  remoteproc: Move coredump functionality to a new file
  remoteproc: Add inline coredump functionality
  remoteproc: Add coredump debugfs entry

 drivers/remoteproc/Makefile              |   1 +
 drivers/remoteproc/remoteproc_core.c     | 191 ------------------
 drivers/remoteproc/remoteproc_coredump.c | 322 +++++++++++++++++++++++++++++++
 drivers/remoteproc/remoteproc_debugfs.c  |  86 +++++++++
 drivers/remoteproc/remoteproc_internal.h |   4 +
 include/linux/remoteproc.h               |  15 ++
 6 files changed, 428 insertions(+), 191 deletions(-)
 create mode 100644 drivers/remoteproc/remoteproc_coredump.c

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file
  2020-05-14 20:07 [PATCH v3 0/3] Extend coredump functionality Rishabh Bhatnagar
@ 2020-05-14 20:07 ` Rishabh Bhatnagar
  2020-05-19 23:28   ` Bjorn Andersson
  2020-05-21 21:30   ` Mathieu Poirier
  2020-05-14 20:07 ` [PATCH v3 2/3] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
  2020-05-14 20:07 ` [PATCH v3 3/3] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar
  2 siblings, 2 replies; 10+ messages in thread
From: Rishabh Bhatnagar @ 2020-05-14 20:07 UTC (permalink / raw)
  To: linux-remoteproc, linux-kernel
  Cc: bjorn.andersson, mathieu.poirier, tsoni, psodagud, sidgup,
	Rishabh Bhatnagar

Move all coredump functionality to an individual file. This is
being done so that the current functionality can be extended
in future patchsets.

Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 drivers/remoteproc/Makefile              |   1 +
 drivers/remoteproc/remoteproc_core.c     | 191 -----------------------------
 drivers/remoteproc/remoteproc_coredump.c | 204 +++++++++++++++++++++++++++++++
 drivers/remoteproc/remoteproc_internal.h |   4 +
 4 files changed, 209 insertions(+), 191 deletions(-)
 create mode 100644 drivers/remoteproc/remoteproc_coredump.c

diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 0effd38..f1a33c3 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -5,6 +5,7 @@
 
 obj-$(CONFIG_REMOTEPROC)		+= remoteproc.o
 remoteproc-y				:= remoteproc_core.o
+remoteproc-y				+= remoteproc_coredump.o
 remoteproc-y				+= remoteproc_debugfs.o
 remoteproc-y				+= remoteproc_sysfs.o
 remoteproc-y				+= remoteproc_virtio.o
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 4bd0f45..22575f4 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -26,7 +26,6 @@
 #include <linux/firmware.h>
 #include <linux/string.h>
 #include <linux/debugfs.h>
-#include <linux/devcoredump.h>
 #include <linux/rculist.h>
 #include <linux/remoteproc.h>
 #include <linux/iommu.h>
@@ -40,7 +39,6 @@
 #include <linux/platform_device.h>
 
 #include "remoteproc_internal.h"
-#include "remoteproc_elf_helpers.h"
 
 #define HIGH_BITS_MASK 0xFFFFFFFF00000000ULL
 
@@ -1238,19 +1236,6 @@ static int rproc_alloc_registered_carveouts(struct rproc *rproc)
 	return 0;
 }
 
-/**
- * rproc_coredump_cleanup() - clean up dump_segments list
- * @rproc: the remote processor handle
- */
-static void rproc_coredump_cleanup(struct rproc *rproc)
-{
-	struct rproc_dump_segment *entry, *tmp;
-
-	list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
-		list_del(&entry->node);
-		kfree(entry);
-	}
-}
 
 /**
  * rproc_resource_cleanup() - clean up and free all acquired resources
@@ -1509,182 +1494,6 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
 	return 0;
 }
 
-/**
- * rproc_coredump_add_segment() - add segment of device memory to coredump
- * @rproc:	handle of a remote processor
- * @da:		device address
- * @size:	size of segment
- *
- * Add device memory to the list of segments to be included in a coredump for
- * the remoteproc.
- *
- * Return: 0 on success, negative errno on error.
- */
-int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size)
-{
-	struct rproc_dump_segment *segment;
-
-	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
-	if (!segment)
-		return -ENOMEM;
-
-	segment->da = da;
-	segment->size = size;
-
-	list_add_tail(&segment->node, &rproc->dump_segments);
-
-	return 0;
-}
-EXPORT_SYMBOL(rproc_coredump_add_segment);
-
-/**
- * rproc_coredump_add_custom_segment() - add custom coredump segment
- * @rproc:	handle of a remote processor
- * @da:		device address
- * @size:	size of segment
- * @dumpfn:	custom dump function called for each segment during coredump
- * @priv:	private data
- *
- * Add device memory to the list of segments to be included in the coredump
- * and associate the segment with the given custom dump function and private
- * data.
- *
- * Return: 0 on success, negative errno on error.
- */
-int rproc_coredump_add_custom_segment(struct rproc *rproc,
-				      dma_addr_t da, size_t size,
-				      void (*dumpfn)(struct rproc *rproc,
-						     struct rproc_dump_segment *segment,
-						     void *dest),
-				      void *priv)
-{
-	struct rproc_dump_segment *segment;
-
-	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
-	if (!segment)
-		return -ENOMEM;
-
-	segment->da = da;
-	segment->size = size;
-	segment->priv = priv;
-	segment->dump = dumpfn;
-
-	list_add_tail(&segment->node, &rproc->dump_segments);
-
-	return 0;
-}
-EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
-
-/**
- * rproc_coredump_set_elf_info() - set coredump elf information
- * @rproc:	handle of a remote processor
- * @class:	elf class for coredump elf file
- * @machine:	elf machine for coredump elf file
- *
- * Set elf information which will be used for coredump elf file.
- *
- * Return: 0 on success, negative errno on error.
- */
-int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
-{
-	if (class != ELFCLASS64 && class != ELFCLASS32)
-		return -EINVAL;
-
-	rproc->elf_class = class;
-	rproc->elf_machine = machine;
-
-	return 0;
-}
-EXPORT_SYMBOL(rproc_coredump_set_elf_info);
-
-/**
- * rproc_coredump() - perform coredump
- * @rproc:	rproc handle
- *
- * This function will generate an ELF header for the registered segments
- * and create a devcoredump device associated with rproc.
- */
-static void rproc_coredump(struct rproc *rproc)
-{
-	struct rproc_dump_segment *segment;
-	void *phdr;
-	void *ehdr;
-	size_t data_size;
-	size_t offset;
-	void *data;
-	void *ptr;
-	u8 class = rproc->elf_class;
-	int phnum = 0;
-
-	if (list_empty(&rproc->dump_segments))
-		return;
-
-	if (class == ELFCLASSNONE) {
-		dev_err(&rproc->dev, "Elf class is not set\n");
-		return;
-	}
-
-	data_size = elf_size_of_hdr(class);
-	list_for_each_entry(segment, &rproc->dump_segments, node) {
-		data_size += elf_size_of_phdr(class) + segment->size;
-
-		phnum++;
-	}
-
-	data = vmalloc(data_size);
-	if (!data)
-		return;
-
-	ehdr = data;
-
-	memset(ehdr, 0, elf_size_of_hdr(class));
-	/* e_ident field is common for both elf32 and elf64 */
-	elf_hdr_init_ident(ehdr, class);
-
-	elf_hdr_set_e_type(class, ehdr, ET_CORE);
-	elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
-	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
-	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
-	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
-	elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
-	elf_hdr_set_e_phentsize(class, ehdr, elf_size_of_phdr(class));
-	elf_hdr_set_e_phnum(class, ehdr, phnum);
-
-	phdr = data + elf_hdr_get_e_phoff(class, ehdr);
-	offset = elf_hdr_get_e_phoff(class, ehdr);
-	offset += elf_size_of_phdr(class) * elf_hdr_get_e_phnum(class, ehdr);
-
-	list_for_each_entry(segment, &rproc->dump_segments, node) {
-		memset(phdr, 0, elf_size_of_phdr(class));
-		elf_phdr_set_p_type(class, phdr, PT_LOAD);
-		elf_phdr_set_p_offset(class, phdr, offset);
-		elf_phdr_set_p_vaddr(class, phdr, segment->da);
-		elf_phdr_set_p_paddr(class, phdr, segment->da);
-		elf_phdr_set_p_filesz(class, phdr, segment->size);
-		elf_phdr_set_p_memsz(class, phdr, segment->size);
-		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
-		elf_phdr_set_p_align(class, phdr, 0);
-
-		if (segment->dump) {
-			segment->dump(rproc, segment, data + offset);
-		} else {
-			ptr = rproc_da_to_va(rproc, segment->da, segment->size);
-			if (!ptr) {
-				dev_err(&rproc->dev,
-					"invalid coredump segment (%pad, %zu)\n",
-					&segment->da, segment->size);
-				memset(data + offset, 0xff, segment->size);
-			} else {
-				memcpy(data + offset, ptr, segment->size);
-			}
-		}
-
-		offset += elf_phdr_get_p_filesz(class, phdr);
-		phdr += elf_size_of_phdr(class);
-	}
-
-	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
-}
 
 /**
  * rproc_trigger_recovery() - recover a remoteproc
diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
new file mode 100644
index 0000000..ded0244
--- /dev/null
+++ b/drivers/remoteproc/remoteproc_coredump.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Coredump functionality for Remoteproc framework.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/devcoredump.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/remoteproc.h>
+#include "remoteproc_internal.h"
+#include "remoteproc_elf_helpers.h"
+
+/**
+ * rproc_coredump_cleanup() - clean up dump_segments list
+ * @rproc: the remote processor handle
+ */
+void rproc_coredump_cleanup(struct rproc *rproc)
+{
+	struct rproc_dump_segment *entry, *tmp;
+
+	list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
+		list_del(&entry->node);
+		kfree(entry);
+	}
+}
+
+/**
+ * rproc_coredump_add_segment() - add segment of device memory to coredump
+ * @rproc:	handle of a remote processor
+ * @da:		device address
+ * @size:	size of segment
+ *
+ * Add device memory to the list of segments to be included in a coredump for
+ * the remoteproc.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size)
+{
+	struct rproc_dump_segment *segment;
+
+	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
+	if (!segment)
+		return -ENOMEM;
+
+	segment->da = da;
+	segment->size = size;
+
+	list_add_tail(&segment->node, &rproc->dump_segments);
+
+	return 0;
+}
+EXPORT_SYMBOL(rproc_coredump_add_segment);
+
+/**
+ * rproc_coredump_add_custom_segment() - add custom coredump segment
+ * @rproc:	handle of a remote processor
+ * @da:		device address
+ * @size:	size of segment
+ * @dumpfn:	custom dump function called for each segment during coredump
+ * @priv:	private data
+ *
+ * Add device memory to the list of segments to be included in the coredump
+ * and associate the segment with the given custom dump function and private
+ * data.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+int rproc_coredump_add_custom_segment(struct rproc *rproc,
+				      dma_addr_t da, size_t size,
+				      void (*dumpfn)(struct rproc *rproc,
+						     struct rproc_dump_segment *segment,
+						     void *dest),
+				      void *priv)
+{
+	struct rproc_dump_segment *segment;
+
+	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
+	if (!segment)
+		return -ENOMEM;
+
+	segment->da = da;
+	segment->size = size;
+	segment->priv = priv;
+	segment->dump = dumpfn;
+
+	list_add_tail(&segment->node, &rproc->dump_segments);
+
+	return 0;
+}
+EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
+
+/**
+ * rproc_coredump_set_elf_info() - set coredump elf information
+ * @rproc:	handle of a remote processor
+ * @class:	elf class for coredump elf file
+ * @machine:	elf machine for coredump elf file
+ *
+ * Set elf information which will be used for coredump elf file.
+ *
+ * Return: 0 on success, negative errno on error.
+ */
+int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
+{
+	if (class != ELFCLASS64 && class != ELFCLASS32)
+		return -EINVAL;
+
+	rproc->elf_class = class;
+	rproc->elf_machine = machine;
+
+	return 0;
+}
+EXPORT_SYMBOL(rproc_coredump_set_elf_info);
+
+/**
+ * rproc_coredump() - perform coredump
+ * @rproc:	rproc handle
+ *
+ * This function will generate an ELF header for the registered segments
+ * and create a devcoredump device associated with rproc.
+ */
+void rproc_coredump(struct rproc *rproc)
+{
+	struct rproc_dump_segment *segment;
+	void *phdr;
+	void *ehdr;
+	size_t data_size;
+	size_t offset;
+	void *data;
+	void *ptr;
+	u8 class = rproc->elf_class;
+	int phnum = 0;
+
+	if (list_empty(&rproc->dump_segments))
+		return;
+
+	if (class == ELFCLASSNONE) {
+		dev_err(&rproc->dev, "Elf class is not set\n");
+		return;
+	}
+
+	data_size = elf_size_of_hdr(class);
+	list_for_each_entry(segment, &rproc->dump_segments, node) {
+		data_size += elf_size_of_phdr(class) + segment->size;
+
+		phnum++;
+	}
+
+	data = vmalloc(data_size);
+	if (!data)
+		return;
+
+	ehdr = data;
+
+	memset(ehdr, 0, elf_size_of_hdr(class));
+	/* e_ident field is common for both elf32 and elf64 */
+	elf_hdr_init_ident(ehdr, class);
+
+	elf_hdr_set_e_type(class, ehdr, ET_CORE);
+	elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
+	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
+	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
+	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
+	elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
+	elf_hdr_set_e_phentsize(class, ehdr, elf_size_of_phdr(class));
+	elf_hdr_set_e_phnum(class, ehdr, phnum);
+
+	phdr = data + elf_hdr_get_e_phoff(class, ehdr);
+	offset = elf_hdr_get_e_phoff(class, ehdr);
+	offset += elf_size_of_phdr(class) * elf_hdr_get_e_phnum(class, ehdr);
+
+	list_for_each_entry(segment, &rproc->dump_segments, node) {
+		memset(phdr, 0, elf_size_of_phdr(class));
+		elf_phdr_set_p_type(class, phdr, PT_LOAD);
+		elf_phdr_set_p_offset(class, phdr, offset);
+		elf_phdr_set_p_vaddr(class, phdr, segment->da);
+		elf_phdr_set_p_paddr(class, phdr, segment->da);
+		elf_phdr_set_p_filesz(class, phdr, segment->size);
+		elf_phdr_set_p_memsz(class, phdr, segment->size);
+		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
+		elf_phdr_set_p_align(class, phdr, 0);
+
+		if (segment->dump) {
+			segment->dump(rproc, segment, data + offset);
+		} else {
+			ptr = rproc_da_to_va(rproc, segment->da, segment->size);
+			if (!ptr) {
+				dev_err(&rproc->dev,
+					"invalid coredump segment (%pad, %zu)\n",
+					&segment->da, segment->size);
+				memset(data + offset, 0xff, segment->size);
+			} else {
+				memcpy(data + offset, ptr, segment->size);
+			}
+		}
+
+		offset += elf_phdr_get_p_filesz(class, phdr);
+		phdr += elf_size_of_phdr(class);
+	}
+
+	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
+}
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index 4ba7cb5..97d441b 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -47,6 +47,10 @@ struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
 int rproc_init_sysfs(void);
 void rproc_exit_sysfs(void);
 
+/* from remoteproc_coredump.c */
+void rproc_coredump_cleanup(struct rproc *rproc);
+void rproc_coredump(struct rproc *rproc);
+
 void rproc_free_vring(struct rproc_vring *rvring);
 int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v3 2/3] remoteproc: Add inline coredump functionality
  2020-05-14 20:07 [PATCH v3 0/3] Extend coredump functionality Rishabh Bhatnagar
  2020-05-14 20:07 ` [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
@ 2020-05-14 20:07 ` Rishabh Bhatnagar
  2020-05-19 23:59   ` Bjorn Andersson
  2020-05-21 21:35   ` Mathieu Poirier
  2020-05-14 20:07 ` [PATCH v3 3/3] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar
  2 siblings, 2 replies; 10+ messages in thread
From: Rishabh Bhatnagar @ 2020-05-14 20:07 UTC (permalink / raw)
  To: linux-remoteproc, linux-kernel
  Cc: bjorn.andersson, mathieu.poirier, tsoni, psodagud, sidgup,
	Rishabh Bhatnagar

The current coredump implementation uses vmalloc area to copy
all the segments. But this might put strain on low memory targets
as the firmware size sometimes is in tens of MBs. The situation
becomes worse if there are multiple remote processors undergoing
recovery at the same time. This patch adds inline coredump
functionality that avoids extra memory usage. This requires
recovery to be halted until data is read by userspace and free
function is called.

Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 drivers/remoteproc/remoteproc_coredump.c | 129 +++++++++++++++++++++++++++++--
 include/linux/remoteproc.h               |  15 ++++
 2 files changed, 139 insertions(+), 5 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
index ded0244..de75e89 100644
--- a/drivers/remoteproc/remoteproc_coredump.c
+++ b/drivers/remoteproc/remoteproc_coredump.c
@@ -12,6 +12,12 @@
 #include "remoteproc_internal.h"
 #include "remoteproc_elf_helpers.h"
 
+struct rproc_coredump_state {
+	struct rproc *rproc;
+	void *header;
+	struct completion dump_done;
+};
+
 /**
  * rproc_coredump_cleanup() - clean up dump_segments list
  * @rproc: the remote processor handle
@@ -114,12 +120,96 @@ int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
 }
 EXPORT_SYMBOL(rproc_coredump_set_elf_info);
 
+static void rproc_coredump_free(void *data)
+{
+	struct rproc_coredump_state *dump_state = data;
+
+	complete(&dump_state->dump_done);
+	vfree(dump_state->header);
+}
+
+static unsigned long rproc_coredump_find_segment(loff_t user_offset,
+						  struct list_head *segments,
+						  size_t *data_left)
+{
+	struct rproc_dump_segment *segment;
+
+	list_for_each_entry(segment, segments, node) {
+		if (user_offset < segment->size) {
+			*data_left = segment->size - user_offset;
+			return segment->da + user_offset;
+		}
+		user_offset -= segment->size;
+	}
+
+	*data_left = 0;
+	return 0;
+}
+
+static ssize_t rproc_coredump_read(char *buffer, loff_t offset, size_t count,
+				    void *data, size_t header_sz)
+{
+	void *device_mem;
+	size_t seg_data;
+	size_t copy_sz, bytes_left = count;
+	unsigned long addr;
+	struct rproc_coredump_state *dump_state = data;
+	struct rproc *rproc = dump_state->rproc;
+	void *elfcore = dump_state->header;
+
+	/* Copy the vmalloc'ed header first. */
+	if (offset < header_sz) {
+		copy_sz = memory_read_from_buffer(buffer, count, &offset,
+						  elfcore, header_sz);
+		if (copy_sz < 0)
+			return -EINVAL;
+
+		return copy_sz;
+	}
+
+	/* Find out the segment memory chunk to be copied based on offset.
+	 * Keep copying data until count bytes are read.
+	 */
+	while (bytes_left) {
+		addr = rproc_coredump_find_segment(offset - header_sz,
+						   &rproc->dump_segments,
+						   &seg_data);
+		/* EOF check */
+		if (seg_data == 0) {
+			dev_info(&rproc->dev, "Ramdump done, %lld bytes read",
+				 offset);
+			break;
+		}
+
+		copy_sz = min_t(size_t, bytes_left, seg_data);
+
+		device_mem = rproc_da_to_va(rproc, addr, copy_sz);
+		if (!device_mem) {
+			dev_err(&rproc->dev, "Coredump: %lx with size %zd out of remoteproc carveout\n",
+				addr, copy_sz);
+			return -ENOMEM;
+		}
+		memcpy(buffer, device_mem, copy_sz);
+
+		offset += copy_sz;
+		buffer += copy_sz;
+		bytes_left -= copy_sz;
+	}
+
+	return count - bytes_left;
+}
+
 /**
  * rproc_coredump() - perform coredump
  * @rproc:	rproc handle
  *
  * This function will generate an ELF header for the registered segments
- * and create a devcoredump device associated with rproc.
+ * and create a devcoredump device associated with rproc. Based on the
+ * coredump configuration this function will directly copy the segments
+ * from device memory to userspace or copy segments from device memory to
+ * a separate buffer, which can then be read by userspace.
+ * The first approach avoids using extra vmalloc memory. But it will stall
+ * recovery flow until dump is read by userspace.
  */
 void rproc_coredump(struct rproc *rproc)
 {
@@ -132,8 +222,10 @@ void rproc_coredump(struct rproc *rproc)
 	void *ptr;
 	u8 class = rproc->elf_class;
 	int phnum = 0;
+	struct rproc_coredump_state dump_state;
+	enum rproc_dump_mechanism dump_conf = rproc->dump_conf;
 
-	if (list_empty(&rproc->dump_segments))
+	if (list_empty(&rproc->dump_segments) || dump_conf == COREDUMP_DISABLED)
 		return;
 
 	if (class == ELFCLASSNONE) {
@@ -143,7 +235,14 @@ void rproc_coredump(struct rproc *rproc)
 
 	data_size = elf_size_of_hdr(class);
 	list_for_each_entry(segment, &rproc->dump_segments, node) {
-		data_size += elf_size_of_phdr(class) + segment->size;
+
+		/* For default configuration buffer includes headers & segments.
+		 * For inline dump buffer just includes headers as segments are
+		 * directly read from device memory.
+		 */
+		data_size += elf_size_of_phdr(class);
+		if (dump_conf == COREDUMP_DEFAULT)
+			data_size += segment->size;
 
 		phnum++;
 	}
@@ -182,6 +281,10 @@ void rproc_coredump(struct rproc *rproc)
 		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
 		elf_phdr_set_p_align(class, phdr, 0);
 
+		/* No need to copy segments for inline dumps */
+		if (dump_conf == COREDUMP_INLINE)
+			goto next_seg;
+
 		if (segment->dump) {
 			segment->dump(rproc, segment, data + offset);
 		} else {
@@ -195,10 +298,26 @@ void rproc_coredump(struct rproc *rproc)
 				memcpy(data + offset, ptr, segment->size);
 			}
 		}
-
+next_seg:
 		offset += elf_phdr_get_p_filesz(class, phdr);
 		phdr += elf_size_of_phdr(class);
 	}
 
-	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
+	if (dump_conf == COREDUMP_DEFAULT) {
+		dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
+		return;
+	}
+
+	/* Initialize the dump state struct to be used by rproc_coredump_read */
+	dump_state.rproc = rproc;
+	dump_state.header = data;
+	init_completion(&dump_state.dump_done);
+
+	dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
+		      rproc_coredump_read, rproc_coredump_free);
+
+	/* Wait until the dump is read and free is called. Data is freed
+	 * by devcoredump framework automatically after 5 minutes.
+	 */
+	wait_for_completion(&dump_state.dump_done);
 }
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 0468be4..ab2b9b7 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -435,6 +435,19 @@ enum rproc_crash_type {
 };
 
 /**
+ * enum rproc_dump_mechanism - Coredump options for core
+ * @COREDUMP_DEFAULT:	Copy dump to separate buffer and carry on with recovery
+ * @COREDUMP_INLINE:	Read segments directly from device memory. Stall
+			recovery until all segments are read
+ * @COREDUMP_DISABLED:	Don't perform any dump
+ */
+enum rproc_dump_mechanism {
+	COREDUMP_DEFAULT,
+	COREDUMP_INLINE,
+	COREDUMP_DISABLED,
+};
+
+/**
  * struct rproc_dump_segment - segment info from ELF header
  * @node:	list node related to the rproc segment list
  * @da:		device address of the segment
@@ -466,6 +479,7 @@ struct rproc_dump_segment {
  * @dev: virtual device for refcounting and common remoteproc behavior
  * @power: refcount of users who need this rproc powered up
  * @state: state of the device
+ * @dump_conf: Currenlty selected coredump configuration
  * @lock: lock which protects concurrent manipulations of the rproc
  * @dbg_dir: debugfs directory of this rproc device
  * @traces: list of trace buffers
@@ -499,6 +513,7 @@ struct rproc {
 	struct device dev;
 	atomic_t power;
 	unsigned int state;
+	enum rproc_dump_mechanism dump_conf;
 	struct mutex lock;
 	struct dentry *dbg_dir;
 	struct list_head traces;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v3 3/3] remoteproc: Add coredump debugfs entry
  2020-05-14 20:07 [PATCH v3 0/3] Extend coredump functionality Rishabh Bhatnagar
  2020-05-14 20:07 ` [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
  2020-05-14 20:07 ` [PATCH v3 2/3] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
@ 2020-05-14 20:07 ` Rishabh Bhatnagar
  2020-05-20  0:02   ` Bjorn Andersson
  2020-05-21 21:26   ` Mathieu Poirier
  2 siblings, 2 replies; 10+ messages in thread
From: Rishabh Bhatnagar @ 2020-05-14 20:07 UTC (permalink / raw)
  To: linux-remoteproc, linux-kernel
  Cc: bjorn.andersson, mathieu.poirier, tsoni, psodagud, sidgup,
	Rishabh Bhatnagar

Add coredump debugfs entry to configure the type of dump that will
be collected during recovery. User can select between default or
inline coredump functionality. Also coredump collection can be
disabled through this interface.
This functionality can be configured differently for different
remote processors.

Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 drivers/remoteproc/remoteproc_debugfs.c | 86 +++++++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
index 732770e..2f611de 100644
--- a/drivers/remoteproc/remoteproc_debugfs.c
+++ b/drivers/remoteproc/remoteproc_debugfs.c
@@ -28,6 +28,90 @@
 static struct dentry *rproc_dbg;
 
 /*
+ * A coredump-configuration-to-string lookup table, for exposing a
+ * human readable configuration via debugfs. Always keep in sync with
+ * enum rproc_coredump_mechanism
+ */
+static const char * const rproc_coredump_str[] = {
+	[COREDUMP_DEFAULT]	= "default",
+	[COREDUMP_INLINE]	= "inline",
+	[COREDUMP_DISABLED]	= "disabled",
+};
+
+/* Expose the current coredump configuration via debugfs */
+static ssize_t rproc_coredump_read(struct file *filp, char __user *userbuf,
+				    size_t count, loff_t *ppos)
+{
+	struct rproc *rproc = filp->private_data;
+	const char *buf = rproc_coredump_str[rproc->dump_conf];
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+}
+
+/*
+ * By writing to the 'coredump' debugfs entry, we control the behavior of the
+ * coredump mechanism dynamically. The default value of this entry is "default".
+ *
+ * The 'coredump' debugfs entry supports these commands:
+ *
+ * default:	This is the default coredump mechanism. When the remoteproc
+ *		crashes the entire coredump will be copied to a separate buffer
+ *		and exposed to userspace.
+ *
+ * inline:	The coredump will not be copied to a separate buffer and the
+ *		recovery process will have to wait until data is read by
+ *		userspace. But this avoid usage of extra memory.
+ *
+ * disabled:	This will disable coredump. Recovery will proceed without
+ *		collecting any dump.
+ */
+static ssize_t rproc_coredump_write(struct file *filp,
+				     const char __user *user_buf, size_t count,
+				     loff_t *ppos)
+{
+	struct rproc *rproc = filp->private_data;
+	int ret, err = 0;
+	char buf[20];
+
+	if (count > sizeof(buf))
+		return -EINVAL;
+
+	ret = copy_from_user(buf, user_buf, count);
+	if (ret)
+		return -EFAULT;
+
+	/* remove end of line */
+	if (buf[count - 1] == '\n')
+		buf[count - 1] = '\0';
+
+	if (rproc->state == RPROC_CRASHED) {
+		dev_err(&rproc->dev, "can't change coredump configuration\n");
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (!strncmp(buf, "disable", count))
+		rproc->dump_conf = COREDUMP_DISABLED;
+	else if (!strncmp(buf, "inline", count))
+		rproc->dump_conf = COREDUMP_INLINE;
+	else if (!strncmp(buf, "default", count))
+		rproc->dump_conf = COREDUMP_DEFAULT;
+	else {
+		dev_err(&rproc->dev, "Invalid coredump configuration\n");
+		err = -EINVAL;
+	}
+out:
+	return err ? err : count;
+}
+
+static const struct file_operations rproc_coredump_fops = {
+	.read = rproc_coredump_read,
+	.write = rproc_coredump_write,
+	.open = simple_open,
+	.llseek = generic_file_llseek,
+};
+
+/*
  * Some remote processors may support dumping trace logs into a shared
  * memory buffer. We expose this trace buffer using debugfs, so users
  * can easily tell what's going on remotely.
@@ -337,6 +421,8 @@ void rproc_create_debug_dir(struct rproc *rproc)
 			    rproc, &rproc_rsc_table_fops);
 	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
 			    rproc, &rproc_carveouts_fops);
+	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
+			    rproc, &rproc_coredump_fops);
 }
 
 void __init rproc_init_debugfs(void)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file
  2020-05-14 20:07 ` [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
@ 2020-05-19 23:28   ` Bjorn Andersson
  2020-05-21 21:30   ` Mathieu Poirier
  1 sibling, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2020-05-19 23:28 UTC (permalink / raw)
  To: Rishabh Bhatnagar
  Cc: linux-remoteproc, linux-kernel, mathieu.poirier, tsoni, psodagud, sidgup

On Thu 14 May 13:07 PDT 2020, Rishabh Bhatnagar wrote:

> Move all coredump functionality to an individual file. This is
> being done so that the current functionality can be extended
> in future patchsets.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Thanks,
Bjorn

> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/Makefile              |   1 +
>  drivers/remoteproc/remoteproc_core.c     | 191 -----------------------------
>  drivers/remoteproc/remoteproc_coredump.c | 204 +++++++++++++++++++++++++++++++
>  drivers/remoteproc/remoteproc_internal.h |   4 +
>  4 files changed, 209 insertions(+), 191 deletions(-)
>  create mode 100644 drivers/remoteproc/remoteproc_coredump.c
> 
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 0effd38..f1a33c3 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -5,6 +5,7 @@
>  
>  obj-$(CONFIG_REMOTEPROC)		+= remoteproc.o
>  remoteproc-y				:= remoteproc_core.o
> +remoteproc-y				+= remoteproc_coredump.o
>  remoteproc-y				+= remoteproc_debugfs.o
>  remoteproc-y				+= remoteproc_sysfs.o
>  remoteproc-y				+= remoteproc_virtio.o
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 4bd0f45..22575f4 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -26,7 +26,6 @@
>  #include <linux/firmware.h>
>  #include <linux/string.h>
>  #include <linux/debugfs.h>
> -#include <linux/devcoredump.h>
>  #include <linux/rculist.h>
>  #include <linux/remoteproc.h>
>  #include <linux/iommu.h>
> @@ -40,7 +39,6 @@
>  #include <linux/platform_device.h>
>  
>  #include "remoteproc_internal.h"
> -#include "remoteproc_elf_helpers.h"
>  
>  #define HIGH_BITS_MASK 0xFFFFFFFF00000000ULL
>  
> @@ -1238,19 +1236,6 @@ static int rproc_alloc_registered_carveouts(struct rproc *rproc)
>  	return 0;
>  }
>  
> -/**
> - * rproc_coredump_cleanup() - clean up dump_segments list
> - * @rproc: the remote processor handle
> - */
> -static void rproc_coredump_cleanup(struct rproc *rproc)
> -{
> -	struct rproc_dump_segment *entry, *tmp;
> -
> -	list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
> -		list_del(&entry->node);
> -		kfree(entry);
> -	}
> -}
>  
>  /**
>   * rproc_resource_cleanup() - clean up and free all acquired resources
> @@ -1509,182 +1494,6 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
>  	return 0;
>  }
>  
> -/**
> - * rproc_coredump_add_segment() - add segment of device memory to coredump
> - * @rproc:	handle of a remote processor
> - * @da:		device address
> - * @size:	size of segment
> - *
> - * Add device memory to the list of segments to be included in a coredump for
> - * the remoteproc.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size)
> -{
> -	struct rproc_dump_segment *segment;
> -
> -	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> -	if (!segment)
> -		return -ENOMEM;
> -
> -	segment->da = da;
> -	segment->size = size;
> -
> -	list_add_tail(&segment->node, &rproc->dump_segments);
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(rproc_coredump_add_segment);
> -
> -/**
> - * rproc_coredump_add_custom_segment() - add custom coredump segment
> - * @rproc:	handle of a remote processor
> - * @da:		device address
> - * @size:	size of segment
> - * @dumpfn:	custom dump function called for each segment during coredump
> - * @priv:	private data
> - *
> - * Add device memory to the list of segments to be included in the coredump
> - * and associate the segment with the given custom dump function and private
> - * data.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int rproc_coredump_add_custom_segment(struct rproc *rproc,
> -				      dma_addr_t da, size_t size,
> -				      void (*dumpfn)(struct rproc *rproc,
> -						     struct rproc_dump_segment *segment,
> -						     void *dest),
> -				      void *priv)
> -{
> -	struct rproc_dump_segment *segment;
> -
> -	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> -	if (!segment)
> -		return -ENOMEM;
> -
> -	segment->da = da;
> -	segment->size = size;
> -	segment->priv = priv;
> -	segment->dump = dumpfn;
> -
> -	list_add_tail(&segment->node, &rproc->dump_segments);
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
> -
> -/**
> - * rproc_coredump_set_elf_info() - set coredump elf information
> - * @rproc:	handle of a remote processor
> - * @class:	elf class for coredump elf file
> - * @machine:	elf machine for coredump elf file
> - *
> - * Set elf information which will be used for coredump elf file.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
> -{
> -	if (class != ELFCLASS64 && class != ELFCLASS32)
> -		return -EINVAL;
> -
> -	rproc->elf_class = class;
> -	rproc->elf_machine = machine;
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(rproc_coredump_set_elf_info);
> -
> -/**
> - * rproc_coredump() - perform coredump
> - * @rproc:	rproc handle
> - *
> - * This function will generate an ELF header for the registered segments
> - * and create a devcoredump device associated with rproc.
> - */
> -static void rproc_coredump(struct rproc *rproc)
> -{
> -	struct rproc_dump_segment *segment;
> -	void *phdr;
> -	void *ehdr;
> -	size_t data_size;
> -	size_t offset;
> -	void *data;
> -	void *ptr;
> -	u8 class = rproc->elf_class;
> -	int phnum = 0;
> -
> -	if (list_empty(&rproc->dump_segments))
> -		return;
> -
> -	if (class == ELFCLASSNONE) {
> -		dev_err(&rproc->dev, "Elf class is not set\n");
> -		return;
> -	}
> -
> -	data_size = elf_size_of_hdr(class);
> -	list_for_each_entry(segment, &rproc->dump_segments, node) {
> -		data_size += elf_size_of_phdr(class) + segment->size;
> -
> -		phnum++;
> -	}
> -
> -	data = vmalloc(data_size);
> -	if (!data)
> -		return;
> -
> -	ehdr = data;
> -
> -	memset(ehdr, 0, elf_size_of_hdr(class));
> -	/* e_ident field is common for both elf32 and elf64 */
> -	elf_hdr_init_ident(ehdr, class);
> -
> -	elf_hdr_set_e_type(class, ehdr, ET_CORE);
> -	elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
> -	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
> -	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
> -	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
> -	elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
> -	elf_hdr_set_e_phentsize(class, ehdr, elf_size_of_phdr(class));
> -	elf_hdr_set_e_phnum(class, ehdr, phnum);
> -
> -	phdr = data + elf_hdr_get_e_phoff(class, ehdr);
> -	offset = elf_hdr_get_e_phoff(class, ehdr);
> -	offset += elf_size_of_phdr(class) * elf_hdr_get_e_phnum(class, ehdr);
> -
> -	list_for_each_entry(segment, &rproc->dump_segments, node) {
> -		memset(phdr, 0, elf_size_of_phdr(class));
> -		elf_phdr_set_p_type(class, phdr, PT_LOAD);
> -		elf_phdr_set_p_offset(class, phdr, offset);
> -		elf_phdr_set_p_vaddr(class, phdr, segment->da);
> -		elf_phdr_set_p_paddr(class, phdr, segment->da);
> -		elf_phdr_set_p_filesz(class, phdr, segment->size);
> -		elf_phdr_set_p_memsz(class, phdr, segment->size);
> -		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
> -		elf_phdr_set_p_align(class, phdr, 0);
> -
> -		if (segment->dump) {
> -			segment->dump(rproc, segment, data + offset);
> -		} else {
> -			ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> -			if (!ptr) {
> -				dev_err(&rproc->dev,
> -					"invalid coredump segment (%pad, %zu)\n",
> -					&segment->da, segment->size);
> -				memset(data + offset, 0xff, segment->size);
> -			} else {
> -				memcpy(data + offset, ptr, segment->size);
> -			}
> -		}
> -
> -		offset += elf_phdr_get_p_filesz(class, phdr);
> -		phdr += elf_size_of_phdr(class);
> -	}
> -
> -	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> -}
>  
>  /**
>   * rproc_trigger_recovery() - recover a remoteproc
> diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
> new file mode 100644
> index 0000000..ded0244
> --- /dev/null
> +++ b/drivers/remoteproc/remoteproc_coredump.c
> @@ -0,0 +1,204 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Coredump functionality for Remoteproc framework.
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/devcoredump.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/remoteproc.h>
> +#include "remoteproc_internal.h"
> +#include "remoteproc_elf_helpers.h"
> +
> +/**
> + * rproc_coredump_cleanup() - clean up dump_segments list
> + * @rproc: the remote processor handle
> + */
> +void rproc_coredump_cleanup(struct rproc *rproc)
> +{
> +	struct rproc_dump_segment *entry, *tmp;
> +
> +	list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
> +		list_del(&entry->node);
> +		kfree(entry);
> +	}
> +}
> +
> +/**
> + * rproc_coredump_add_segment() - add segment of device memory to coredump
> + * @rproc:	handle of a remote processor
> + * @da:		device address
> + * @size:	size of segment
> + *
> + * Add device memory to the list of segments to be included in a coredump for
> + * the remoteproc.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size)
> +{
> +	struct rproc_dump_segment *segment;
> +
> +	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> +	if (!segment)
> +		return -ENOMEM;
> +
> +	segment->da = da;
> +	segment->size = size;
> +
> +	list_add_tail(&segment->node, &rproc->dump_segments);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(rproc_coredump_add_segment);
> +
> +/**
> + * rproc_coredump_add_custom_segment() - add custom coredump segment
> + * @rproc:	handle of a remote processor
> + * @da:		device address
> + * @size:	size of segment
> + * @dumpfn:	custom dump function called for each segment during coredump
> + * @priv:	private data
> + *
> + * Add device memory to the list of segments to be included in the coredump
> + * and associate the segment with the given custom dump function and private
> + * data.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int rproc_coredump_add_custom_segment(struct rproc *rproc,
> +				      dma_addr_t da, size_t size,
> +				      void (*dumpfn)(struct rproc *rproc,
> +						     struct rproc_dump_segment *segment,
> +						     void *dest),
> +				      void *priv)
> +{
> +	struct rproc_dump_segment *segment;
> +
> +	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> +	if (!segment)
> +		return -ENOMEM;
> +
> +	segment->da = da;
> +	segment->size = size;
> +	segment->priv = priv;
> +	segment->dump = dumpfn;
> +
> +	list_add_tail(&segment->node, &rproc->dump_segments);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
> +
> +/**
> + * rproc_coredump_set_elf_info() - set coredump elf information
> + * @rproc:	handle of a remote processor
> + * @class:	elf class for coredump elf file
> + * @machine:	elf machine for coredump elf file
> + *
> + * Set elf information which will be used for coredump elf file.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
> +{
> +	if (class != ELFCLASS64 && class != ELFCLASS32)
> +		return -EINVAL;
> +
> +	rproc->elf_class = class;
> +	rproc->elf_machine = machine;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(rproc_coredump_set_elf_info);
> +
> +/**
> + * rproc_coredump() - perform coredump
> + * @rproc:	rproc handle
> + *
> + * This function will generate an ELF header for the registered segments
> + * and create a devcoredump device associated with rproc.
> + */
> +void rproc_coredump(struct rproc *rproc)
> +{
> +	struct rproc_dump_segment *segment;
> +	void *phdr;
> +	void *ehdr;
> +	size_t data_size;
> +	size_t offset;
> +	void *data;
> +	void *ptr;
> +	u8 class = rproc->elf_class;
> +	int phnum = 0;
> +
> +	if (list_empty(&rproc->dump_segments))
> +		return;
> +
> +	if (class == ELFCLASSNONE) {
> +		dev_err(&rproc->dev, "Elf class is not set\n");
> +		return;
> +	}
> +
> +	data_size = elf_size_of_hdr(class);
> +	list_for_each_entry(segment, &rproc->dump_segments, node) {
> +		data_size += elf_size_of_phdr(class) + segment->size;
> +
> +		phnum++;
> +	}
> +
> +	data = vmalloc(data_size);
> +	if (!data)
> +		return;
> +
> +	ehdr = data;
> +
> +	memset(ehdr, 0, elf_size_of_hdr(class));
> +	/* e_ident field is common for both elf32 and elf64 */
> +	elf_hdr_init_ident(ehdr, class);
> +
> +	elf_hdr_set_e_type(class, ehdr, ET_CORE);
> +	elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
> +	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
> +	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
> +	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
> +	elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
> +	elf_hdr_set_e_phentsize(class, ehdr, elf_size_of_phdr(class));
> +	elf_hdr_set_e_phnum(class, ehdr, phnum);
> +
> +	phdr = data + elf_hdr_get_e_phoff(class, ehdr);
> +	offset = elf_hdr_get_e_phoff(class, ehdr);
> +	offset += elf_size_of_phdr(class) * elf_hdr_get_e_phnum(class, ehdr);
> +
> +	list_for_each_entry(segment, &rproc->dump_segments, node) {
> +		memset(phdr, 0, elf_size_of_phdr(class));
> +		elf_phdr_set_p_type(class, phdr, PT_LOAD);
> +		elf_phdr_set_p_offset(class, phdr, offset);
> +		elf_phdr_set_p_vaddr(class, phdr, segment->da);
> +		elf_phdr_set_p_paddr(class, phdr, segment->da);
> +		elf_phdr_set_p_filesz(class, phdr, segment->size);
> +		elf_phdr_set_p_memsz(class, phdr, segment->size);
> +		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
> +		elf_phdr_set_p_align(class, phdr, 0);
> +
> +		if (segment->dump) {
> +			segment->dump(rproc, segment, data + offset);
> +		} else {
> +			ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> +			if (!ptr) {
> +				dev_err(&rproc->dev,
> +					"invalid coredump segment (%pad, %zu)\n",
> +					&segment->da, segment->size);
> +				memset(data + offset, 0xff, segment->size);
> +			} else {
> +				memcpy(data + offset, ptr, segment->size);
> +			}
> +		}
> +
> +		offset += elf_phdr_get_p_filesz(class, phdr);
> +		phdr += elf_size_of_phdr(class);
> +	}
> +
> +	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> +}
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 4ba7cb5..97d441b 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -47,6 +47,10 @@ struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
>  int rproc_init_sysfs(void);
>  void rproc_exit_sysfs(void);
>  
> +/* from remoteproc_coredump.c */
> +void rproc_coredump_cleanup(struct rproc *rproc);
> +void rproc_coredump(struct rproc *rproc);
> +
>  void rproc_free_vring(struct rproc_vring *rvring);
>  int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 2/3] remoteproc: Add inline coredump functionality
  2020-05-14 20:07 ` [PATCH v3 2/3] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
@ 2020-05-19 23:59   ` Bjorn Andersson
  2020-05-21 21:35   ` Mathieu Poirier
  1 sibling, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2020-05-19 23:59 UTC (permalink / raw)
  To: Rishabh Bhatnagar
  Cc: linux-remoteproc, linux-kernel, mathieu.poirier, tsoni, psodagud, sidgup

On Thu 14 May 13:07 PDT 2020, Rishabh Bhatnagar wrote:

> The current coredump implementation uses vmalloc area to copy
> all the segments. But this might put strain on low memory targets
> as the firmware size sometimes is in tens of MBs. The situation
> becomes worse if there are multiple remote processors undergoing
> recovery at the same time. This patch adds inline coredump
> functionality that avoids extra memory usage. This requires
> recovery to be halted until data is read by userspace and free
> function is called.
> 

Overall I think this looks really good now, but I spotted an issue with
INLINE dumps not using segment->dump().

Also there's 3 checkpatch --strict warnings, please fix those.

> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/remoteproc_coredump.c | 129 +++++++++++++++++++++++++++++--
>  include/linux/remoteproc.h               |  15 ++++
>  2 files changed, 139 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
[..]
> +static ssize_t rproc_coredump_read(char *buffer, loff_t offset, size_t count,
> +				    void *data, size_t header_sz)
> +{
> +	void *device_mem;
> +	size_t seg_data;
> +	size_t copy_sz, bytes_left = count;
> +	unsigned long addr;
> +	struct rproc_coredump_state *dump_state = data;
> +	struct rproc *rproc = dump_state->rproc;
> +	void *elfcore = dump_state->header;
> +
> +	/* Copy the vmalloc'ed header first. */
> +	if (offset < header_sz) {
> +		copy_sz = memory_read_from_buffer(buffer, count, &offset,
> +						  elfcore, header_sz);
> +		if (copy_sz < 0)
> +			return -EINVAL;
> +
> +		return copy_sz;
> +	}
> +
> +	/* Find out the segment memory chunk to be copied based on offset.
> +	 * Keep copying data until count bytes are read.
> +	 */

	/*
	 * Multiline comments start on the second line throughout
	 * remoteproc, please follow this.
	 */

> +	while (bytes_left) {
> +		addr = rproc_coredump_find_segment(offset - header_sz,
> +						   &rproc->dump_segments,
> +						   &seg_data);
> +		/* EOF check */
> +		if (seg_data == 0) {
> +			dev_info(&rproc->dev, "Ramdump done, %lld bytes read",
> +				 offset);
> +			break;
> +		}
> +
> +		copy_sz = min_t(size_t, bytes_left, seg_data);
> +
> +		device_mem = rproc_da_to_va(rproc, addr, copy_sz);
> +		if (!device_mem) {
> +			dev_err(&rproc->dev, "Coredump: %lx with size %zd out of remoteproc carveout\n",
> +				addr, copy_sz);
> +			return -ENOMEM;

I think it would be best to maintain the same behavior between INLINE
and DEFAULT here.

> +		}
> +		memcpy(buffer, device_mem, copy_sz);

This won't work for modem on e.g. SDM845, because we need to do some
special tricks to make the memory readable, that's why we invoke
segment->dump() in the DEFAULT scenario. Doing a memcpy here instead
will result in a security violation.

Perhaps this snippet can be extracted to a separate helper function,
which would allow you to avoid the next_seg goto label below.

> +
> +		offset += copy_sz;
> +		buffer += copy_sz;
> +		bytes_left -= copy_sz;
> +	}
> +
> +	return count - bytes_left;
> +}
[..]
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 0468be4..ab2b9b7 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -435,6 +435,19 @@ enum rproc_crash_type {
>  };
>  
>  /**
> + * enum rproc_dump_mechanism - Coredump options for core
> + * @COREDUMP_DEFAULT:	Copy dump to separate buffer and carry on with recovery
> + * @COREDUMP_INLINE:	Read segments directly from device memory. Stall
> +			recovery until all segments are read
> + * @COREDUMP_DISABLED:	Don't perform any dump
> + */
> +enum rproc_dump_mechanism {
> +	COREDUMP_DEFAULT,
> +	COREDUMP_INLINE,
> +	COREDUMP_DISABLED,

Please prefix these with RPROC_, as "coredump" has a meaning outside
remoteproc as well.

Regards,
Bjorn

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 3/3] remoteproc: Add coredump debugfs entry
  2020-05-14 20:07 ` [PATCH v3 3/3] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar
@ 2020-05-20  0:02   ` Bjorn Andersson
  2020-05-21 21:26   ` Mathieu Poirier
  1 sibling, 0 replies; 10+ messages in thread
From: Bjorn Andersson @ 2020-05-20  0:02 UTC (permalink / raw)
  To: Rishabh Bhatnagar
  Cc: linux-remoteproc, linux-kernel, mathieu.poirier, tsoni, psodagud, sidgup

On Thu 14 May 13:07 PDT 2020, Rishabh Bhatnagar wrote:

> Add coredump debugfs entry to configure the type of dump that will
> be collected during recovery. User can select between default or
> inline coredump functionality. Also coredump collection can be
> disabled through this interface.
> This functionality can be configured differently for different
> remote processors.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/remoteproc_debugfs.c | 86 +++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
> index 732770e..2f611de 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -28,6 +28,90 @@
>  static struct dentry *rproc_dbg;
>  
>  /*
> + * A coredump-configuration-to-string lookup table, for exposing a
> + * human readable configuration via debugfs. Always keep in sync with
> + * enum rproc_coredump_mechanism
> + */
> +static const char * const rproc_coredump_str[] = {
> +	[COREDUMP_DEFAULT]	= "default",
> +	[COREDUMP_INLINE]	= "inline",
> +	[COREDUMP_DISABLED]	= "disabled",
> +};
> +
> +/* Expose the current coredump configuration via debugfs */
> +static ssize_t rproc_coredump_read(struct file *filp, char __user *userbuf,
> +				    size_t count, loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	const char *buf = rproc_coredump_str[rproc->dump_conf];
> +
> +	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
> +}
> +
> +/*
> + * By writing to the 'coredump' debugfs entry, we control the behavior of the
> + * coredump mechanism dynamically. The default value of this entry is "default".
> + *
> + * The 'coredump' debugfs entry supports these commands:
> + *
> + * default:	This is the default coredump mechanism. When the remoteproc
> + *		crashes the entire coredump will be copied to a separate buffer
> + *		and exposed to userspace.
> + *
> + * inline:	The coredump will not be copied to a separate buffer and the
> + *		recovery process will have to wait until data is read by
> + *		userspace. But this avoid usage of extra memory.
> + *
> + * disabled:	This will disable coredump. Recovery will proceed without
> + *		collecting any dump.
> + */
> +static ssize_t rproc_coredump_write(struct file *filp,
> +				     const char __user *user_buf, size_t count,
> +				     loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	int ret, err = 0;
> +	char buf[20];
> +
> +	if (count > sizeof(buf))
> +		return -EINVAL;
> +
> +	ret = copy_from_user(buf, user_buf, count);
> +	if (ret)
> +		return -EFAULT;
> +
> +	/* remove end of line */
> +	if (buf[count - 1] == '\n')
> +		buf[count - 1] = '\0';
> +
> +	if (rproc->state == RPROC_CRASHED) {
> +		dev_err(&rproc->dev, "can't change coredump configuration\n");
> +		err = -EBUSY;
> +		goto out;
> +	}
> +
> +	if (!strncmp(buf, "disable", count))
> +		rproc->dump_conf = COREDUMP_DISABLED;
> +	else if (!strncmp(buf, "inline", count))
> +		rproc->dump_conf = COREDUMP_INLINE;
> +	else if (!strncmp(buf, "default", count))
> +		rproc->dump_conf = COREDUMP_DEFAULT;
> +	else {
> +		dev_err(&rproc->dev, "Invalid coredump configuration\n");
> +		err = -EINVAL;
> +	}
> +out:
> +	return err ? err : count;
> +}
> +
> +static const struct file_operations rproc_coredump_fops = {
> +	.read = rproc_coredump_read,
> +	.write = rproc_coredump_write,
> +	.open = simple_open,
> +	.llseek = generic_file_llseek,
> +};
> +
> +/*
>   * Some remote processors may support dumping trace logs into a shared
>   * memory buffer. We expose this trace buffer using debugfs, so users
>   * can easily tell what's going on remotely.
> @@ -337,6 +421,8 @@ void rproc_create_debug_dir(struct rproc *rproc)
>  			    rproc, &rproc_rsc_table_fops);
>  	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
>  			    rproc, &rproc_carveouts_fops);
> +	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
> +			    rproc, &rproc_coredump_fops);
>  }
>  
>  void __init rproc_init_debugfs(void)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 3/3] remoteproc: Add coredump debugfs entry
  2020-05-14 20:07 ` [PATCH v3 3/3] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar
  2020-05-20  0:02   ` Bjorn Andersson
@ 2020-05-21 21:26   ` Mathieu Poirier
  1 sibling, 0 replies; 10+ messages in thread
From: Mathieu Poirier @ 2020-05-21 21:26 UTC (permalink / raw)
  To: Rishabh Bhatnagar
  Cc: linux-remoteproc, linux-kernel, bjorn.andersson, tsoni, psodagud, sidgup

On Thu, May 14, 2020 at 01:07:36PM -0700, Rishabh Bhatnagar wrote:
> Add coredump debugfs entry to configure the type of dump that will
> be collected during recovery. User can select between default or
> inline coredump functionality. Also coredump collection can be
> disabled through this interface.
> This functionality can be configured differently for different
> remote processors.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/remoteproc_debugfs.c | 86 +++++++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
> index 732770e..2f611de 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -28,6 +28,90 @@
>  static struct dentry *rproc_dbg;
>  
>  /*
> + * A coredump-configuration-to-string lookup table, for exposing a
> + * human readable configuration via debugfs. Always keep in sync with
> + * enum rproc_coredump_mechanism
> + */
> +static const char * const rproc_coredump_str[] = {
> +	[COREDUMP_DEFAULT]	= "default",
> +	[COREDUMP_INLINE]	= "inline",
> +	[COREDUMP_DISABLED]	= "disabled",
> +};
> +
> +/* Expose the current coredump configuration via debugfs */
> +static ssize_t rproc_coredump_read(struct file *filp, char __user *userbuf,
> +				    size_t count, loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	const char *buf = rproc_coredump_str[rproc->dump_conf];
> +
> +	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
> +}
> +
> +/*
> + * By writing to the 'coredump' debugfs entry, we control the behavior of the
> + * coredump mechanism dynamically. The default value of this entry is "default".
> + *
> + * The 'coredump' debugfs entry supports these commands:
> + *
> + * default:	This is the default coredump mechanism. When the remoteproc
> + *		crashes the entire coredump will be copied to a separate buffer
> + *		and exposed to userspace.
> + *
> + * inline:	The coredump will not be copied to a separate buffer and the
> + *		recovery process will have to wait until data is read by
> + *		userspace. But this avoid usage of extra memory.
> + *
> + * disabled:	This will disable coredump. Recovery will proceed without
> + *		collecting any dump.
> + */
> +static ssize_t rproc_coredump_write(struct file *filp,
> +				     const char __user *user_buf, size_t count,
> +				     loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	int ret, err = 0;
> +	char buf[20];
> +
> +	if (count > sizeof(buf))
> +		return -EINVAL;
> +
> +	ret = copy_from_user(buf, user_buf, count);
> +	if (ret)
> +		return -EFAULT;
> +
> +	/* remove end of line */
> +	if (buf[count - 1] == '\n')
> +		buf[count - 1] = '\0';
> +
> +	if (rproc->state == RPROC_CRASHED) {
> +		dev_err(&rproc->dev, "can't change coredump configuration\n");
> +		err = -EBUSY;
> +		goto out;
> +	}
> +
> +	if (!strncmp(buf, "disable", count))
> +		rproc->dump_conf = COREDUMP_DISABLED;
> +	else if (!strncmp(buf, "inline", count))
> +		rproc->dump_conf = COREDUMP_INLINE;
> +	else if (!strncmp(buf, "default", count))
> +		rproc->dump_conf = COREDUMP_DEFAULT;
> +	else {
> +		dev_err(&rproc->dev, "Invalid coredump configuration\n");
> +		err = -EINVAL;
> +	}
> +out:
> +	return err ? err : count;
> +}
> +
> +static const struct file_operations rproc_coredump_fops = {
> +	.read = rproc_coredump_read,
> +	.write = rproc_coredump_write,
> +	.open = simple_open,
> +	.llseek = generic_file_llseek,
> +};
> +
> +/*
>   * Some remote processors may support dumping trace logs into a shared
>   * memory buffer. We expose this trace buffer using debugfs, so users
>   * can easily tell what's going on remotely.
> @@ -337,6 +421,8 @@ void rproc_create_debug_dir(struct rproc *rproc)
>  			    rproc, &rproc_rsc_table_fops);
>  	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
>  			    rproc, &rproc_carveouts_fops);
> +	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
> +			    rproc, &rproc_coredump_fops);

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

>  }
>  
>  void __init rproc_init_debugfs(void)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file
  2020-05-14 20:07 ` [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
  2020-05-19 23:28   ` Bjorn Andersson
@ 2020-05-21 21:30   ` Mathieu Poirier
  1 sibling, 0 replies; 10+ messages in thread
From: Mathieu Poirier @ 2020-05-21 21:30 UTC (permalink / raw)
  To: Rishabh Bhatnagar
  Cc: linux-remoteproc, linux-kernel, bjorn.andersson, tsoni, psodagud, sidgup

On Thu, May 14, 2020 at 01:07:34PM -0700, Rishabh Bhatnagar wrote:
> Move all coredump functionality to an individual file. This is
> being done so that the current functionality can be extended
> in future patchsets.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/Makefile              |   1 +
>  drivers/remoteproc/remoteproc_core.c     | 191 -----------------------------
>  drivers/remoteproc/remoteproc_coredump.c | 204 +++++++++++++++++++++++++++++++
>  drivers/remoteproc/remoteproc_internal.h |   4 +
>  4 files changed, 209 insertions(+), 191 deletions(-)
>  create mode 100644 drivers/remoteproc/remoteproc_coredump.c
>

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
 
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 0effd38..f1a33c3 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -5,6 +5,7 @@
>  
>  obj-$(CONFIG_REMOTEPROC)		+= remoteproc.o
>  remoteproc-y				:= remoteproc_core.o
> +remoteproc-y				+= remoteproc_coredump.o
>  remoteproc-y				+= remoteproc_debugfs.o
>  remoteproc-y				+= remoteproc_sysfs.o
>  remoteproc-y				+= remoteproc_virtio.o
> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
> index 4bd0f45..22575f4 100644
> --- a/drivers/remoteproc/remoteproc_core.c
> +++ b/drivers/remoteproc/remoteproc_core.c
> @@ -26,7 +26,6 @@
>  #include <linux/firmware.h>
>  #include <linux/string.h>
>  #include <linux/debugfs.h>
> -#include <linux/devcoredump.h>
>  #include <linux/rculist.h>
>  #include <linux/remoteproc.h>
>  #include <linux/iommu.h>
> @@ -40,7 +39,6 @@
>  #include <linux/platform_device.h>
>  
>  #include "remoteproc_internal.h"
> -#include "remoteproc_elf_helpers.h"
>  
>  #define HIGH_BITS_MASK 0xFFFFFFFF00000000ULL
>  
> @@ -1238,19 +1236,6 @@ static int rproc_alloc_registered_carveouts(struct rproc *rproc)
>  	return 0;
>  }
>  
> -/**
> - * rproc_coredump_cleanup() - clean up dump_segments list
> - * @rproc: the remote processor handle
> - */
> -static void rproc_coredump_cleanup(struct rproc *rproc)
> -{
> -	struct rproc_dump_segment *entry, *tmp;
> -
> -	list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
> -		list_del(&entry->node);
> -		kfree(entry);
> -	}
> -}
>  
>  /**
>   * rproc_resource_cleanup() - clean up and free all acquired resources
> @@ -1509,182 +1494,6 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
>  	return 0;
>  }
>  
> -/**
> - * rproc_coredump_add_segment() - add segment of device memory to coredump
> - * @rproc:	handle of a remote processor
> - * @da:		device address
> - * @size:	size of segment
> - *
> - * Add device memory to the list of segments to be included in a coredump for
> - * the remoteproc.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size)
> -{
> -	struct rproc_dump_segment *segment;
> -
> -	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> -	if (!segment)
> -		return -ENOMEM;
> -
> -	segment->da = da;
> -	segment->size = size;
> -
> -	list_add_tail(&segment->node, &rproc->dump_segments);
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(rproc_coredump_add_segment);
> -
> -/**
> - * rproc_coredump_add_custom_segment() - add custom coredump segment
> - * @rproc:	handle of a remote processor
> - * @da:		device address
> - * @size:	size of segment
> - * @dumpfn:	custom dump function called for each segment during coredump
> - * @priv:	private data
> - *
> - * Add device memory to the list of segments to be included in the coredump
> - * and associate the segment with the given custom dump function and private
> - * data.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int rproc_coredump_add_custom_segment(struct rproc *rproc,
> -				      dma_addr_t da, size_t size,
> -				      void (*dumpfn)(struct rproc *rproc,
> -						     struct rproc_dump_segment *segment,
> -						     void *dest),
> -				      void *priv)
> -{
> -	struct rproc_dump_segment *segment;
> -
> -	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> -	if (!segment)
> -		return -ENOMEM;
> -
> -	segment->da = da;
> -	segment->size = size;
> -	segment->priv = priv;
> -	segment->dump = dumpfn;
> -
> -	list_add_tail(&segment->node, &rproc->dump_segments);
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
> -
> -/**
> - * rproc_coredump_set_elf_info() - set coredump elf information
> - * @rproc:	handle of a remote processor
> - * @class:	elf class for coredump elf file
> - * @machine:	elf machine for coredump elf file
> - *
> - * Set elf information which will be used for coredump elf file.
> - *
> - * Return: 0 on success, negative errno on error.
> - */
> -int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
> -{
> -	if (class != ELFCLASS64 && class != ELFCLASS32)
> -		return -EINVAL;
> -
> -	rproc->elf_class = class;
> -	rproc->elf_machine = machine;
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(rproc_coredump_set_elf_info);
> -
> -/**
> - * rproc_coredump() - perform coredump
> - * @rproc:	rproc handle
> - *
> - * This function will generate an ELF header for the registered segments
> - * and create a devcoredump device associated with rproc.
> - */
> -static void rproc_coredump(struct rproc *rproc)
> -{
> -	struct rproc_dump_segment *segment;
> -	void *phdr;
> -	void *ehdr;
> -	size_t data_size;
> -	size_t offset;
> -	void *data;
> -	void *ptr;
> -	u8 class = rproc->elf_class;
> -	int phnum = 0;
> -
> -	if (list_empty(&rproc->dump_segments))
> -		return;
> -
> -	if (class == ELFCLASSNONE) {
> -		dev_err(&rproc->dev, "Elf class is not set\n");
> -		return;
> -	}
> -
> -	data_size = elf_size_of_hdr(class);
> -	list_for_each_entry(segment, &rproc->dump_segments, node) {
> -		data_size += elf_size_of_phdr(class) + segment->size;
> -
> -		phnum++;
> -	}
> -
> -	data = vmalloc(data_size);
> -	if (!data)
> -		return;
> -
> -	ehdr = data;
> -
> -	memset(ehdr, 0, elf_size_of_hdr(class));
> -	/* e_ident field is common for both elf32 and elf64 */
> -	elf_hdr_init_ident(ehdr, class);
> -
> -	elf_hdr_set_e_type(class, ehdr, ET_CORE);
> -	elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
> -	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
> -	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
> -	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
> -	elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
> -	elf_hdr_set_e_phentsize(class, ehdr, elf_size_of_phdr(class));
> -	elf_hdr_set_e_phnum(class, ehdr, phnum);
> -
> -	phdr = data + elf_hdr_get_e_phoff(class, ehdr);
> -	offset = elf_hdr_get_e_phoff(class, ehdr);
> -	offset += elf_size_of_phdr(class) * elf_hdr_get_e_phnum(class, ehdr);
> -
> -	list_for_each_entry(segment, &rproc->dump_segments, node) {
> -		memset(phdr, 0, elf_size_of_phdr(class));
> -		elf_phdr_set_p_type(class, phdr, PT_LOAD);
> -		elf_phdr_set_p_offset(class, phdr, offset);
> -		elf_phdr_set_p_vaddr(class, phdr, segment->da);
> -		elf_phdr_set_p_paddr(class, phdr, segment->da);
> -		elf_phdr_set_p_filesz(class, phdr, segment->size);
> -		elf_phdr_set_p_memsz(class, phdr, segment->size);
> -		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
> -		elf_phdr_set_p_align(class, phdr, 0);
> -
> -		if (segment->dump) {
> -			segment->dump(rproc, segment, data + offset);
> -		} else {
> -			ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> -			if (!ptr) {
> -				dev_err(&rproc->dev,
> -					"invalid coredump segment (%pad, %zu)\n",
> -					&segment->da, segment->size);
> -				memset(data + offset, 0xff, segment->size);
> -			} else {
> -				memcpy(data + offset, ptr, segment->size);
> -			}
> -		}
> -
> -		offset += elf_phdr_get_p_filesz(class, phdr);
> -		phdr += elf_size_of_phdr(class);
> -	}
> -
> -	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> -}
>  
>  /**
>   * rproc_trigger_recovery() - recover a remoteproc
> diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
> new file mode 100644
> index 0000000..ded0244
> --- /dev/null
> +++ b/drivers/remoteproc/remoteproc_coredump.c
> @@ -0,0 +1,204 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Coredump functionality for Remoteproc framework.
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/devcoredump.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/remoteproc.h>
> +#include "remoteproc_internal.h"
> +#include "remoteproc_elf_helpers.h"
> +
> +/**
> + * rproc_coredump_cleanup() - clean up dump_segments list
> + * @rproc: the remote processor handle
> + */
> +void rproc_coredump_cleanup(struct rproc *rproc)
> +{
> +	struct rproc_dump_segment *entry, *tmp;
> +
> +	list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
> +		list_del(&entry->node);
> +		kfree(entry);
> +	}
> +}
> +
> +/**
> + * rproc_coredump_add_segment() - add segment of device memory to coredump
> + * @rproc:	handle of a remote processor
> + * @da:		device address
> + * @size:	size of segment
> + *
> + * Add device memory to the list of segments to be included in a coredump for
> + * the remoteproc.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size)
> +{
> +	struct rproc_dump_segment *segment;
> +
> +	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> +	if (!segment)
> +		return -ENOMEM;
> +
> +	segment->da = da;
> +	segment->size = size;
> +
> +	list_add_tail(&segment->node, &rproc->dump_segments);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(rproc_coredump_add_segment);
> +
> +/**
> + * rproc_coredump_add_custom_segment() - add custom coredump segment
> + * @rproc:	handle of a remote processor
> + * @da:		device address
> + * @size:	size of segment
> + * @dumpfn:	custom dump function called for each segment during coredump
> + * @priv:	private data
> + *
> + * Add device memory to the list of segments to be included in the coredump
> + * and associate the segment with the given custom dump function and private
> + * data.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int rproc_coredump_add_custom_segment(struct rproc *rproc,
> +				      dma_addr_t da, size_t size,
> +				      void (*dumpfn)(struct rproc *rproc,
> +						     struct rproc_dump_segment *segment,
> +						     void *dest),
> +				      void *priv)
> +{
> +	struct rproc_dump_segment *segment;
> +
> +	segment = kzalloc(sizeof(*segment), GFP_KERNEL);
> +	if (!segment)
> +		return -ENOMEM;
> +
> +	segment->da = da;
> +	segment->size = size;
> +	segment->priv = priv;
> +	segment->dump = dumpfn;
> +
> +	list_add_tail(&segment->node, &rproc->dump_segments);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(rproc_coredump_add_custom_segment);
> +
> +/**
> + * rproc_coredump_set_elf_info() - set coredump elf information
> + * @rproc:	handle of a remote processor
> + * @class:	elf class for coredump elf file
> + * @machine:	elf machine for coredump elf file
> + *
> + * Set elf information which will be used for coredump elf file.
> + *
> + * Return: 0 on success, negative errno on error.
> + */
> +int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
> +{
> +	if (class != ELFCLASS64 && class != ELFCLASS32)
> +		return -EINVAL;
> +
> +	rproc->elf_class = class;
> +	rproc->elf_machine = machine;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(rproc_coredump_set_elf_info);
> +
> +/**
> + * rproc_coredump() - perform coredump
> + * @rproc:	rproc handle
> + *
> + * This function will generate an ELF header for the registered segments
> + * and create a devcoredump device associated with rproc.
> + */
> +void rproc_coredump(struct rproc *rproc)
> +{
> +	struct rproc_dump_segment *segment;
> +	void *phdr;
> +	void *ehdr;
> +	size_t data_size;
> +	size_t offset;
> +	void *data;
> +	void *ptr;
> +	u8 class = rproc->elf_class;
> +	int phnum = 0;
> +
> +	if (list_empty(&rproc->dump_segments))
> +		return;
> +
> +	if (class == ELFCLASSNONE) {
> +		dev_err(&rproc->dev, "Elf class is not set\n");
> +		return;
> +	}
> +
> +	data_size = elf_size_of_hdr(class);
> +	list_for_each_entry(segment, &rproc->dump_segments, node) {
> +		data_size += elf_size_of_phdr(class) + segment->size;
> +
> +		phnum++;
> +	}
> +
> +	data = vmalloc(data_size);
> +	if (!data)
> +		return;
> +
> +	ehdr = data;
> +
> +	memset(ehdr, 0, elf_size_of_hdr(class));
> +	/* e_ident field is common for both elf32 and elf64 */
> +	elf_hdr_init_ident(ehdr, class);
> +
> +	elf_hdr_set_e_type(class, ehdr, ET_CORE);
> +	elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
> +	elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
> +	elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
> +	elf_hdr_set_e_phoff(class, ehdr, elf_size_of_hdr(class));
> +	elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
> +	elf_hdr_set_e_phentsize(class, ehdr, elf_size_of_phdr(class));
> +	elf_hdr_set_e_phnum(class, ehdr, phnum);
> +
> +	phdr = data + elf_hdr_get_e_phoff(class, ehdr);
> +	offset = elf_hdr_get_e_phoff(class, ehdr);
> +	offset += elf_size_of_phdr(class) * elf_hdr_get_e_phnum(class, ehdr);
> +
> +	list_for_each_entry(segment, &rproc->dump_segments, node) {
> +		memset(phdr, 0, elf_size_of_phdr(class));
> +		elf_phdr_set_p_type(class, phdr, PT_LOAD);
> +		elf_phdr_set_p_offset(class, phdr, offset);
> +		elf_phdr_set_p_vaddr(class, phdr, segment->da);
> +		elf_phdr_set_p_paddr(class, phdr, segment->da);
> +		elf_phdr_set_p_filesz(class, phdr, segment->size);
> +		elf_phdr_set_p_memsz(class, phdr, segment->size);
> +		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
> +		elf_phdr_set_p_align(class, phdr, 0);
> +
> +		if (segment->dump) {
> +			segment->dump(rproc, segment, data + offset);
> +		} else {
> +			ptr = rproc_da_to_va(rproc, segment->da, segment->size);
> +			if (!ptr) {
> +				dev_err(&rproc->dev,
> +					"invalid coredump segment (%pad, %zu)\n",
> +					&segment->da, segment->size);
> +				memset(data + offset, 0xff, segment->size);
> +			} else {
> +				memcpy(data + offset, ptr, segment->size);
> +			}
> +		}
> +
> +		offset += elf_phdr_get_p_filesz(class, phdr);
> +		phdr += elf_size_of_phdr(class);
> +	}
> +
> +	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> +}
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 4ba7cb5..97d441b 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -47,6 +47,10 @@ struct dentry *rproc_create_trace_file(const char *name, struct rproc *rproc,
>  int rproc_init_sysfs(void);
>  void rproc_exit_sysfs(void);
>  
> +/* from remoteproc_coredump.c */
> +void rproc_coredump_cleanup(struct rproc *rproc);
> +void rproc_coredump(struct rproc *rproc);
> +
>  void rproc_free_vring(struct rproc_vring *rvring);
>  int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
>  
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v3 2/3] remoteproc: Add inline coredump functionality
  2020-05-14 20:07 ` [PATCH v3 2/3] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
  2020-05-19 23:59   ` Bjorn Andersson
@ 2020-05-21 21:35   ` Mathieu Poirier
  1 sibling, 0 replies; 10+ messages in thread
From: Mathieu Poirier @ 2020-05-21 21:35 UTC (permalink / raw)
  To: Rishabh Bhatnagar
  Cc: linux-remoteproc, linux-kernel, bjorn.andersson, tsoni, psodagud, sidgup

Hi Rishab,

On Thu, May 14, 2020 at 01:07:35PM -0700, Rishabh Bhatnagar wrote:
> The current coredump implementation uses vmalloc area to copy
> all the segments. But this might put strain on low memory targets
> as the firmware size sometimes is in tens of MBs. The situation
> becomes worse if there are multiple remote processors undergoing
> recovery at the same time. This patch adds inline coredump
> functionality that avoids extra memory usage. This requires
> recovery to be halted until data is read by userspace and free
> function is called.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/remoteproc/remoteproc_coredump.c | 129 +++++++++++++++++++++++++++++--
>  include/linux/remoteproc.h               |  15 ++++
>  2 files changed, 139 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
> index ded0244..de75e89 100644
> --- a/drivers/remoteproc/remoteproc_coredump.c
> +++ b/drivers/remoteproc/remoteproc_coredump.c
> @@ -12,6 +12,12 @@
>  #include "remoteproc_internal.h"
>  #include "remoteproc_elf_helpers.h"
>  
> +struct rproc_coredump_state {
> +	struct rproc *rproc;
> +	void *header;
> +	struct completion dump_done;
> +};
> +

To use struct completion and related function linux/completion.h needs to be
included.

>  /**
>   * rproc_coredump_cleanup() - clean up dump_segments list
>   * @rproc: the remote processor handle
> @@ -114,12 +120,96 @@ int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine)
>  }
>  EXPORT_SYMBOL(rproc_coredump_set_elf_info);
>  
> +static void rproc_coredump_free(void *data)
> +{
> +	struct rproc_coredump_state *dump_state = data;
> +
> +	complete(&dump_state->dump_done);
> +	vfree(dump_state->header);
> +}
> +
> +static unsigned long rproc_coredump_find_segment(loff_t user_offset,
> +						  struct list_head *segments,
> +						  size_t *data_left)
> +{
> +	struct rproc_dump_segment *segment;
> +
> +	list_for_each_entry(segment, segments, node) {
> +		if (user_offset < segment->size) {
> +			*data_left = segment->size - user_offset;
> +			return segment->da + user_offset;
> +		}
> +		user_offset -= segment->size;
> +	}
> +
> +	*data_left = 0;
> +	return 0;
> +}
> +
> +static ssize_t rproc_coredump_read(char *buffer, loff_t offset, size_t count,
> +				    void *data, size_t header_sz)
> +{
> +	void *device_mem;
> +	size_t seg_data;
> +	size_t copy_sz, bytes_left = count;
> +	unsigned long addr;
> +	struct rproc_coredump_state *dump_state = data;
> +	struct rproc *rproc = dump_state->rproc;
> +	void *elfcore = dump_state->header;
> +
> +	/* Copy the vmalloc'ed header first. */
> +	if (offset < header_sz) {
> +		copy_sz = memory_read_from_buffer(buffer, count, &offset,
> +						  elfcore, header_sz);
> +		if (copy_sz < 0)
> +			return -EINVAL;
> +
> +		return copy_sz;
> +	}
> +
> +	/* Find out the segment memory chunk to be copied based on offset.
> +	 * Keep copying data until count bytes are read.
> +	 */

Wrong format for multi-line comment, the following is the standard format:

        /*
         * Find out the segment memory chunk to be copied based on offset.
         * Keep copying data until count bytes are read.
         */

> +	while (bytes_left) {
> +		addr = rproc_coredump_find_segment(offset - header_sz,
> +						   &rproc->dump_segments,
> +						   &seg_data);
> +		/* EOF check */
> +		if (seg_data == 0) {
> +			dev_info(&rproc->dev, "Ramdump done, %lld bytes read",
> +				 offset);
> +			break;
> +		}
> +
> +		copy_sz = min_t(size_t, bytes_left, seg_data);
> +
> +		device_mem = rproc_da_to_va(rproc, addr, copy_sz);
> +		if (!device_mem) {
> +			dev_err(&rproc->dev, "Coredump: %lx with size %zd out of remoteproc carveout\n",
> +				addr, copy_sz);
> +			return -ENOMEM;
> +		}
> +		memcpy(buffer, device_mem, copy_sz);
> +
> +		offset += copy_sz;
> +		buffer += copy_sz;
> +		bytes_left -= copy_sz;
> +	}
> +
> +	return count - bytes_left;
> +}
> +
>  /**
>   * rproc_coredump() - perform coredump
>   * @rproc:	rproc handle
>   *
>   * This function will generate an ELF header for the registered segments
> - * and create a devcoredump device associated with rproc.
> + * and create a devcoredump device associated with rproc. Based on the
> + * coredump configuration this function will directly copy the segments
> + * from device memory to userspace or copy segments from device memory to
> + * a separate buffer, which can then be read by userspace.
> + * The first approach avoids using extra vmalloc memory. But it will stall
> + * recovery flow until dump is read by userspace.
>   */
>  void rproc_coredump(struct rproc *rproc)
>  {
> @@ -132,8 +222,10 @@ void rproc_coredump(struct rproc *rproc)
>  	void *ptr;
>  	u8 class = rproc->elf_class;
>  	int phnum = 0;
> +	struct rproc_coredump_state dump_state;
> +	enum rproc_dump_mechanism dump_conf = rproc->dump_conf;
>  
> -	if (list_empty(&rproc->dump_segments))
> +	if (list_empty(&rproc->dump_segments) || dump_conf == COREDUMP_DISABLED)
>  		return;
>  
>  	if (class == ELFCLASSNONE) {
> @@ -143,7 +235,14 @@ void rproc_coredump(struct rproc *rproc)
>  
>  	data_size = elf_size_of_hdr(class);
>  	list_for_each_entry(segment, &rproc->dump_segments, node) {
> -		data_size += elf_size_of_phdr(class) + segment->size;
> +
> +		/* For default configuration buffer includes headers & segments.
> +		 * For inline dump buffer just includes headers as segments are
> +		 * directly read from device memory.
> +		 */

Same

> +		data_size += elf_size_of_phdr(class);
> +		if (dump_conf == COREDUMP_DEFAULT)
> +			data_size += segment->size;
>  
>  		phnum++;
>  	}
> @@ -182,6 +281,10 @@ void rproc_coredump(struct rproc *rproc)
>  		elf_phdr_set_p_flags(class, phdr, PF_R | PF_W | PF_X);
>  		elf_phdr_set_p_align(class, phdr, 0);
>  
> +		/* No need to copy segments for inline dumps */
> +		if (dump_conf == COREDUMP_INLINE)
> +			goto next_seg;
> +
>  		if (segment->dump) {
>  			segment->dump(rproc, segment, data + offset);
>  		} else {
> @@ -195,10 +298,26 @@ void rproc_coredump(struct rproc *rproc)
>  				memcpy(data + offset, ptr, segment->size);
>  			}
>  		}
> -
> +next_seg:
>  		offset += elf_phdr_get_p_filesz(class, phdr);
>  		phdr += elf_size_of_phdr(class);
>  	}
>  
> -	dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> +	if (dump_conf == COREDUMP_DEFAULT) {
> +		dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> +		return;
> +	}
> +
> +	/* Initialize the dump state struct to be used by rproc_coredump_read */
> +	dump_state.rproc = rproc;
> +	dump_state.header = data;
> +	init_completion(&dump_state.dump_done);
> +
> +	dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
> +		      rproc_coredump_read, rproc_coredump_free);
> +
> +	/* Wait until the dump is read and free is called. Data is freed
> +	 * by devcoredump framework automatically after 5 minutes.
> +	 */

Same

With the above:

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

> +	wait_for_completion(&dump_state.dump_done);
>  }
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 0468be4..ab2b9b7 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -435,6 +435,19 @@ enum rproc_crash_type {
>  };
>  
>  /**
> + * enum rproc_dump_mechanism - Coredump options for core
> + * @COREDUMP_DEFAULT:	Copy dump to separate buffer and carry on with recovery
> + * @COREDUMP_INLINE:	Read segments directly from device memory. Stall
> +			recovery until all segments are read
> + * @COREDUMP_DISABLED:	Don't perform any dump
> + */
> +enum rproc_dump_mechanism {
> +	COREDUMP_DEFAULT,
> +	COREDUMP_INLINE,
> +	COREDUMP_DISABLED,
> +};
> +
> +/**
>   * struct rproc_dump_segment - segment info from ELF header
>   * @node:	list node related to the rproc segment list
>   * @da:		device address of the segment
> @@ -466,6 +479,7 @@ struct rproc_dump_segment {
>   * @dev: virtual device for refcounting and common remoteproc behavior
>   * @power: refcount of users who need this rproc powered up
>   * @state: state of the device
> + * @dump_conf: Currenlty selected coredump configuration
>   * @lock: lock which protects concurrent manipulations of the rproc
>   * @dbg_dir: debugfs directory of this rproc device
>   * @traces: list of trace buffers
> @@ -499,6 +513,7 @@ struct rproc {
>  	struct device dev;
>  	atomic_t power;
>  	unsigned int state;
> +	enum rproc_dump_mechanism dump_conf;
>  	struct mutex lock;
>  	struct dentry *dbg_dir;
>  	struct list_head traces;
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-14 20:07 [PATCH v3 0/3] Extend coredump functionality Rishabh Bhatnagar
2020-05-14 20:07 ` [PATCH v3 1/3] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
2020-05-19 23:28   ` Bjorn Andersson
2020-05-21 21:30   ` Mathieu Poirier
2020-05-14 20:07 ` [PATCH v3 2/3] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
2020-05-19 23:59   ` Bjorn Andersson
2020-05-21 21:35   ` Mathieu Poirier
2020-05-14 20:07 ` [PATCH v3 3/3] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar
2020-05-20  0:02   ` Bjorn Andersson
2020-05-21 21:26   ` Mathieu Poirier

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git