Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Deepak Kumar Singh <deesin@codeaurora.org>
To: bjorn.andersson@linaro.org, clew@codeaurora.org
Cc: mathieu.poirier@linaro.org, linux-arm-msm@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Deepak Kumar Singh <deesin@codeaurora.org>
Subject: [PATCH V1 0/6] Glink native fixes upstreaming
Date: Thu, 30 Jul 2020 10:48:10 +0530
Message-ID: <1596086296-28529-1-git-send-email-deesin@codeaurora.org> (raw)

Includes fixes for -
Few race conditions while channel release and close
Proper unregistration of rpmsg device to avoid use of stale device
Send notify command to remote when glink fifo is full
Handling packet size larger that 16K

Arun Kumar Neelakantam (3):
  rpmsg: glink: Add TX_DATA_CONT command while sending
  rpmsg: glink: Remove the rpmsg dev in close_ack
  rpmsg: glink: Send READ_NOTIFY command in FIFO full case

Chris Lew (2):
  rpmsg: glink: Deny intent request if reusable intent fits
  rpmsg: glink: Remove channel decouple from rpdev release

Konstantin Dorfman (1):
  rpmsg: glink: fix destroy channel endpoint logic

 drivers/rpmsg/qcom_glink_native.c | 109 +++++++++++++++++++++++++++++++++++---
 1 file changed, 101 insertions(+), 8 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


             reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30  5:18 Deepak Kumar Singh [this message]
2020-07-30  5:18 ` [PATCH V1 1/6] rpmsg: glink: fix destroy channel endpoint logic Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 2/6] rpmsg: glink: Deny intent request if reusable intent fits Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 3/6] rpmsg: glink: Add TX_DATA_CONT command while sending Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 4/6] rpmsg: glink: Remove the rpmsg dev in close_ack Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 5/6] rpmsg: glink: Remove channel decouple from rpdev release Deepak Kumar Singh
2020-07-30  5:18 ` [PATCH V1 6/6] rpmsg: glink: Send READ_NOTIFY command in FIFO full case Deepak Kumar Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1596086296-28529-1-git-send-email-deesin@codeaurora.org \
    --to=deesin@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=clew@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git