Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
* [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices
@ 2020-05-13  5:11 Arun Kumar Neelakantam
  2020-05-13  5:11 ` [PATCH V4 1/4] rpmsg: core: Add signal API support Arun Kumar Neelakantam
                   ` (4 more replies)
  0 siblings, 5 replies; 12+ messages in thread
From: Arun Kumar Neelakantam @ 2020-05-13  5:11 UTC (permalink / raw)
  To: ohad, bjorn.andersson, clew, sricharan
  Cc: linux-remoteproc, linux-kernel, Arun Kumar Neelakantam

Glink transport support signals to exchange state notification between
local and remote side clients. Adding support to send/receive the signal
command and notify the clients through callback and POLL notification.

Changes since v3:
- Correct the TICOMGET case handling as per new rpmsg_get_signals prototype
- Update the rpmsg_get_signals function header

Changes since v2:
- Modify the rpmsg_get_signals function prototype

Changes since v1:
- Split the patches as per functional areas like core, char, glink
- Add set, clear mask for TIOCMSET
- Merge the char signal callback and POLLPRI patches

Arun Kumar Neelakantam (4):
  rpmsg: core: Add signal API support
  rpmsg: glink: Add support to handle signals command
  rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  rpmsg: char: Add signal callback and POLLPRI support

 drivers/rpmsg/qcom_glink_native.c | 126 ++++++++++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_char.c        |  75 ++++++++++++++++++++++-
 drivers/rpmsg/rpmsg_core.c        |  41 +++++++++++++
 drivers/rpmsg/rpmsg_internal.h    |   5 ++
 include/linux/rpmsg.h             |  26 ++++++++
 5 files changed, 270 insertions(+), 3 deletions(-)

-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH V4 1/4] rpmsg: core: Add signal API support
  2020-05-13  5:11 [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Arun Kumar Neelakantam
@ 2020-05-13  5:11 ` Arun Kumar Neelakantam
  2020-05-19 21:58   ` Mathieu Poirier
  2020-05-13  5:11 ` [PATCH V4 2/4] rpmsg: glink: Add support to handle signals command Arun Kumar Neelakantam
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 12+ messages in thread
From: Arun Kumar Neelakantam @ 2020-05-13  5:11 UTC (permalink / raw)
  To: ohad, bjorn.andersson, clew, sricharan
  Cc: linux-remoteproc, linux-kernel, Arun Kumar Neelakantam

Some transports like Glink support the state notifications between
clients using signals similar to serial protocol signals.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_core.c     | 41 +++++++++++++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_internal.h |  5 +++++
 include/linux/rpmsg.h          | 26 ++++++++++++++++++++++++++
 3 files changed, 72 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
index d6c3275..453790b 100644
--- a/drivers/rpmsg/rpmsg_core.c
+++ b/drivers/rpmsg/rpmsg_core.c
@@ -2,6 +2,7 @@
 /*
  * remote processor messaging bus
  *
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  *
@@ -283,6 +284,42 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 }
 EXPORT_SYMBOL(rpmsg_trysend_offchannel);
 
+/**
+ * rpmsg_get_signals() - get the signals for this endpoint
+ * @ept:	the rpmsg endpoint
+ *
+ * Returns signal bits on success and an appropriate error value on failure.
+ */
+int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+	if (WARN_ON(!ept))
+		return -EINVAL;
+	if (!ept->ops->get_signals)
+		return -EOPNOTSUPP;
+
+	return ept->ops->get_signals(ept);
+}
+EXPORT_SYMBOL(rpmsg_get_signals);
+
+/**
+ * rpmsg_set_signals() - set the remote signals for this endpoint
+ * @ept:	the rpmsg endpoint
+ * @set:	set mask for signals
+ * @clear:	clear mask for signals
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear)
+{
+	if (WARN_ON(!ept))
+		return -EINVAL;
+	if (!ept->ops->set_signals)
+		return -EOPNOTSUPP;
+
+	return ept->ops->set_signals(ept, set, clear);
+}
+EXPORT_SYMBOL(rpmsg_set_signals);
+
 /*
  * match an rpmsg channel with a channel info struct.
  * this is used to make sure we're not creating rpmsg devices for channels
@@ -468,6 +505,10 @@ static int rpmsg_dev_probe(struct device *dev)
 
 		rpdev->ept = ept;
 		rpdev->src = ept->addr;
+
+		if (rpdrv->signals)
+			ept->sig_cb = rpdrv->signals;
+
 	}
 
 	err = rpdrv->probe(rpdev);
diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index 3fc83cd..8958d6c 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -2,6 +2,7 @@
 /*
  * remote processor messaging bus internals
  *
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  *
@@ -47,6 +48,8 @@ struct rpmsg_device_ops {
  * @trysendto:		see @rpmsg_trysendto(), optional
  * @trysend_offchannel:	see @rpmsg_trysend_offchannel(), optional
  * @poll:		see @rpmsg_poll(), optional
+ * @get_signals:	see @rpmsg_get_signals(), optional
+ * @set_signals:	see @rpmsg_set_signals(), optional
  *
  * Indirection table for the operations that a rpmsg backend should implement.
  * In addition to @destroy_ept, the backend must at least implement @send and
@@ -66,6 +69,8 @@ struct rpmsg_endpoint_ops {
 			     void *data, int len);
 	__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
 			     poll_table *wait);
+	int (*get_signals)(struct rpmsg_endpoint *ept);
+	int (*set_signals)(struct rpmsg_endpoint *ept, u32 set, u32 clear);
 };
 
 int rpmsg_register_device(struct rpmsg_device *rpdev);
diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
index 9fe156d..48c8ae3 100644
--- a/include/linux/rpmsg.h
+++ b/include/linux/rpmsg.h
@@ -2,6 +2,7 @@
 /*
  * Remote processor messaging
  *
+ * Copyright (c) 2018 The Linux Foundation.
  * Copyright (C) 2011 Texas Instruments, Inc.
  * Copyright (C) 2011 Google, Inc.
  * All rights reserved.
@@ -60,6 +61,7 @@ struct rpmsg_device {
 };
 
 typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
+typedef int (*rpmsg_rx_sig_t)(struct rpmsg_device *, void *, u32, u32);
 
 /**
  * struct rpmsg_endpoint - binds a local rpmsg address to its user
@@ -67,6 +69,7 @@ typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
  * @refcount: when this drops to zero, the ept is deallocated
  * @cb: rx callback handler
  * @cb_lock: must be taken before accessing/changing @cb
+ * @sig_cb: rx serial signal handler
  * @addr: local rpmsg address
  * @priv: private data for the driver's use
  *
@@ -89,6 +92,7 @@ struct rpmsg_endpoint {
 	struct kref refcount;
 	rpmsg_rx_cb_t cb;
 	struct mutex cb_lock;
+	rpmsg_rx_sig_t sig_cb;
 	u32 addr;
 	void *priv;
 
@@ -102,6 +106,7 @@ struct rpmsg_endpoint {
  * @probe: invoked when a matching rpmsg channel (i.e. device) is found
  * @remove: invoked when the rpmsg channel is removed
  * @callback: invoked when an inbound message is received on the channel
+ * @signals: invoked when a serial signal change is received on the channel
  */
 struct rpmsg_driver {
 	struct device_driver drv;
@@ -109,6 +114,7 @@ struct rpmsg_driver {
 	int (*probe)(struct rpmsg_device *dev);
 	void (*remove)(struct rpmsg_device *dev);
 	int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
+	int (*signals)(struct rpmsg_device *, void *, u32, u32);
 };
 
 #if IS_ENABLED(CONFIG_RPMSG)
@@ -135,6 +141,9 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
 __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
 			poll_table *wait);
 
+int rpmsg_get_signals(struct rpmsg_endpoint *ept);
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear);
+
 #else
 
 static inline int register_rpmsg_device(struct rpmsg_device *dev)
@@ -242,6 +251,23 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept,
 	return 0;
 }
 
+static inline int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+
+	return -ENXIO;
+}
+
+static inline int rpmsg_set_signals(struct rpmsg_endpoint *ept,
+				    u32 set, u32 clear)
+{
+	/* This shouldn't be possible */
+	WARN_ON(1);
+
+	return -ENXIO;
+}
+
 #endif /* IS_ENABLED(CONFIG_RPMSG) */
 
 /* use a macro to avoid include chaining to get THIS_MODULE */
-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH V4 2/4] rpmsg: glink: Add support to handle signals command
  2020-05-13  5:11 [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Arun Kumar Neelakantam
  2020-05-13  5:11 ` [PATCH V4 1/4] rpmsg: core: Add signal API support Arun Kumar Neelakantam
@ 2020-05-13  5:11 ` Arun Kumar Neelakantam
  2020-05-19 22:20   ` Mathieu Poirier
  2020-05-13  5:11 ` [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Arun Kumar Neelakantam
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 12+ messages in thread
From: Arun Kumar Neelakantam @ 2020-05-13  5:11 UTC (permalink / raw)
  To: ohad, bjorn.andersson, clew, sricharan
  Cc: linux-remoteproc, linux-kernel, Arun Kumar Neelakantam,
	Andy Gross, open list:ARM/QUALCOMM SUPPORT

Remote peripherals send signal notifications over glink with commandID 15.

Add support to send and receive the signal command and convert the signals
from NATIVE to TIOCM while receiving and vice versa while sending.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/qcom_glink_native.c | 126 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 126 insertions(+)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index fc8ef66..68e039a 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (c) 2016-2017, Linaro Ltd
  */
 
@@ -17,6 +18,7 @@
 #include <linux/rpmsg.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
+#include <linux/termios.h>
 #include <linux/workqueue.h>
 #include <linux/mailbox_client.h>
 
@@ -150,6 +152,8 @@ enum {
  * @intent_req_lock: Synchronises multiple intent requests
  * @intent_req_result: Result of intent request
  * @intent_req_comp: Completion for intent_req signalling
+ * @lsigs:	local side signals
+ * @rsigs:	remote side signals
  */
 struct glink_channel {
 	struct rpmsg_endpoint ept;
@@ -181,6 +185,10 @@ struct glink_channel {
 	struct mutex intent_req_lock;
 	bool intent_req_result;
 	struct completion intent_req_comp;
+
+	unsigned int lsigs;
+	unsigned int rsigs;
+
 };
 
 #define to_glink_channel(_ept) container_of(_ept, struct glink_channel, ept)
@@ -201,9 +209,15 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops;
 #define RPM_CMD_TX_DATA_CONT		12
 #define RPM_CMD_READ_NOTIF		13
 #define RPM_CMD_RX_DONE_W_REUSE		14
+#define RPM_CMD_SIGNALS			15
 
 #define GLINK_FEATURE_INTENTLESS	BIT(1)
 
+#define NATIVE_DTR_SIG	BIT(31)
+#define NATIVE_CTS_SIG	BIT(30)
+#define NATIVE_CD_SIG	BIT(29)
+#define NATIVE_RI_SIG	BIT(28)
+
 static void qcom_glink_rx_done_work(struct work_struct *work);
 
 static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink,
@@ -975,6 +989,76 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
 	return 0;
 }
 
+/**
+ * qcom_glink_send_signals() - convert a signal  cmd to wire format and transmit
+ * @glink:	The transport to transmit on.
+ * @channel:	The glink channel
+ * @sigs:	The signals to encode.
+ *
+ * Return: 0 on success or standard Linux error code.
+ */
+static int qcom_glink_send_signals(struct qcom_glink *glink,
+				   struct glink_channel *channel,
+				   u32 sigs)
+{
+	struct glink_msg msg;
+
+	/* convert signals from TIOCM to NATIVE */
+	sigs &= 0x0fff;
+	if (sigs & TIOCM_DTR)
+		sigs |= NATIVE_DTR_SIG;
+	if (sigs & TIOCM_RTS)
+		sigs |= NATIVE_CTS_SIG;
+	if (sigs & TIOCM_CD)
+		sigs |= NATIVE_CD_SIG;
+	if (sigs & TIOCM_RI)
+		sigs |= NATIVE_RI_SIG;
+
+	msg.cmd = cpu_to_le16(RPM_CMD_SIGNALS);
+	msg.param1 = cpu_to_le16(channel->lcid);
+	msg.param2 = cpu_to_le32(sigs);
+
+	return qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true);
+}
+
+static int qcom_glink_handle_signals(struct qcom_glink *glink,
+				     unsigned int rcid, unsigned int signals)
+{
+	struct glink_channel *channel;
+	unsigned long flags;
+	u32 old;
+
+	spin_lock_irqsave(&glink->idr_lock, flags);
+	channel = idr_find(&glink->rcids, rcid);
+	spin_unlock_irqrestore(&glink->idr_lock, flags);
+	if (!channel) {
+		dev_err(glink->dev, "signal for non-existing channel\n");
+		return -EINVAL;
+	}
+
+	old = channel->rsigs;
+
+	/* convert signals from NATIVE to TIOCM */
+	if (signals & NATIVE_DTR_SIG)
+		signals |= TIOCM_DSR;
+	if (signals & NATIVE_CTS_SIG)
+		signals |= TIOCM_CTS;
+	if (signals & NATIVE_CD_SIG)
+		signals |= TIOCM_CD;
+	if (signals & NATIVE_RI_SIG)
+		signals |= TIOCM_RI;
+	signals &= 0x0fff;
+
+	channel->rsigs = signals;
+
+	if (channel->ept.sig_cb) {
+		channel->ept.sig_cb(channel->ept.rpdev, channel->ept.priv,
+				    old, channel->rsigs);
+	}
+
+	return 0;
+}
+
 static irqreturn_t qcom_glink_native_intr(int irq, void *data)
 {
 	struct qcom_glink *glink = data;
@@ -1036,6 +1120,10 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
 			qcom_glink_handle_intent_req_ack(glink, param1, param2);
 			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
 			break;
+		case RPM_CMD_SIGNALS:
+			qcom_glink_handle_signals(glink, param1, param2);
+			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
+			break;
 		default:
 			dev_err(glink->dev, "unhandled rx cmd: %d\n", cmd);
 			ret = -EINVAL;
@@ -1340,6 +1428,42 @@ static int qcom_glink_trysend(struct rpmsg_endpoint *ept, void *data, int len)
 	return __qcom_glink_send(channel, data, len, false);
 }
 
+static int qcom_glink_get_sigs(struct rpmsg_endpoint *ept)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+
+	return channel->rsigs;
+}
+
+static int qcom_glink_set_sigs(struct rpmsg_endpoint *ept, u32 set, u32 clear)
+{
+	struct glink_channel *channel = to_glink_channel(ept);
+	struct qcom_glink *glink = channel->glink;
+	u32 sigs = channel->lsigs;
+
+	if (set & TIOCM_DTR)
+		sigs |= TIOCM_DTR;
+	if (set & TIOCM_RTS)
+		sigs |= TIOCM_RTS;
+	if (set & TIOCM_CD)
+		sigs |= TIOCM_CD;
+	if (set & TIOCM_RI)
+		sigs |= TIOCM_RI;
+
+	if (clear & TIOCM_DTR)
+		sigs &= ~TIOCM_DTR;
+	if (clear & TIOCM_RTS)
+		sigs &= ~TIOCM_RTS;
+	if (clear & TIOCM_CD)
+		sigs &= ~TIOCM_CD;
+	if (clear & TIOCM_RI)
+		sigs &= ~TIOCM_RI;
+
+	channel->lsigs = sigs;
+
+	return qcom_glink_send_signals(glink, channel, sigs);
+}
+
 /*
  * Finds the device_node for the glink child interested in this channel.
  */
@@ -1373,6 +1497,8 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops = {
 	.destroy_ept = qcom_glink_destroy_ept,
 	.send = qcom_glink_send,
 	.trysend = qcom_glink_trysend,
+	.get_signals = qcom_glink_get_sigs,
+	.set_signals = qcom_glink_set_sigs,
 };
 
 static void qcom_glink_rpdev_release(struct device *dev)
-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  2020-05-13  5:11 [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Arun Kumar Neelakantam
  2020-05-13  5:11 ` [PATCH V4 1/4] rpmsg: core: Add signal API support Arun Kumar Neelakantam
  2020-05-13  5:11 ` [PATCH V4 2/4] rpmsg: glink: Add support to handle signals command Arun Kumar Neelakantam
@ 2020-05-13  5:11 ` Arun Kumar Neelakantam
  2020-05-13 17:58   ` kbuild test robot
  2020-05-19 22:33   ` Mathieu Poirier
  2020-05-13  5:11 ` [PATCH V4 4/4] rpmsg: char: Add signal callback and POLLPRI support Arun Kumar Neelakantam
  2020-05-19 22:49 ` [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Mathieu Poirier
  4 siblings, 2 replies; 12+ messages in thread
From: Arun Kumar Neelakantam @ 2020-05-13  5:11 UTC (permalink / raw)
  To: ohad, bjorn.andersson, clew, sricharan
  Cc: linux-remoteproc, linux-kernel, Arun Kumar Neelakantam

Add TICOMGET and TIOCMSET ioctl support for rpmsg char device nodes
to get/set the low level transport signals.

Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_char.c | 53 +++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 3 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index 4bbbacd..e2f92f3 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
+ * Copyright (c) 2018, The Linux Foundation.
  * Copyright (c) 2016, Linaro Ltd.
  * Copyright (c) 2012, Michal Simek <monstr@monstr.eu>
  * Copyright (c) 2012, PetaLogix
@@ -19,6 +20,7 @@
 #include <linux/rpmsg.h>
 #include <linux/skbuff.h>
 #include <linux/slab.h>
+#include <linux/termios.h>
 #include <linux/uaccess.h>
 #include <uapi/linux/rpmsg.h>
 
@@ -269,15 +271,60 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
 	return mask;
 }
 
+static int rpmsg_eptdev_tiocmset(struct file *fp, unsigned int cmd,
+				 int __user *arg)
+{
+	struct rpmsg_eptdev *eptdev = fp->private_data;
+	u32 set, clear, val;
+	int ret;
+
+	ret = get_user(val, arg);
+	if (ret)
+		return ret;
+	set = clear = 0;
+	switch (cmd) {
+	case TIOCMBIS:
+		set = val;
+		break;
+	case TIOCMBIC:
+		clear = val;
+		break;
+	case TIOCMSET:
+		set = val;
+		clear = ~val;
+		break;
+	}
+
+	set &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
+	clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
+
+	return rpmsg_set_signals(eptdev->ept, set, clear);
+}
+
 static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
 			       unsigned long arg)
 {
 	struct rpmsg_eptdev *eptdev = fp->private_data;
+	int ret;
 
-	if (cmd != RPMSG_DESTROY_EPT_IOCTL)
-		return -EINVAL;
+	switch (cmd) {
+	case TIOCMGET:
+		ret = rpmsg_get_signals(eptdev->ept);
+		if (ret >= 0)
+			ret = put_user(ret, (int __user *)arg);
+		break;
+	case TIOCMSET:
+	case TIOCMBIS:
+	case TIOCMBIC:
+		ret = rpmsg_eptdev_tiocmset(fp, cmd, (int __user *)arg);
+		break;
+	case RPMSG_DESTROY_EPT_IOCTL:
+		ret = rpmsg_eptdev_destroy(&eptdev->dev, NULL);
+	default:
+		ret = -EINVAL;
+	}
 
-	return rpmsg_eptdev_destroy(&eptdev->dev, NULL);
+	return ret;
 }
 
 static const struct file_operations rpmsg_eptdev_fops = {
-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH V4 4/4] rpmsg: char: Add signal callback and POLLPRI support
  2020-05-13  5:11 [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Arun Kumar Neelakantam
                   ` (2 preceding siblings ...)
  2020-05-13  5:11 ` [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Arun Kumar Neelakantam
@ 2020-05-13  5:11 ` Arun Kumar Neelakantam
  2020-05-19 22:49 ` [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Mathieu Poirier
  4 siblings, 0 replies; 12+ messages in thread
From: Arun Kumar Neelakantam @ 2020-05-13  5:11 UTC (permalink / raw)
  To: ohad, bjorn.andersson, clew, sricharan
  Cc: linux-remoteproc, linux-kernel, Arun Kumar Neelakantam

Register a callback to get the signal notifications from rpmsg and
send POLLPRI mask to indicate the signal change in POLL system call.

Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
---
 drivers/rpmsg/rpmsg_char.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
index e2f92f3..ae15d4f 100644
--- a/drivers/rpmsg/rpmsg_char.c
+++ b/drivers/rpmsg/rpmsg_char.c
@@ -64,6 +64,7 @@ struct rpmsg_ctrldev {
  * @queue_lock:	synchronization of @queue operations
  * @queue:	incoming message queue
  * @readq:	wait object for incoming queue
+ * @sig_pending:state of signal notification
  */
 struct rpmsg_eptdev {
 	struct device dev;
@@ -78,6 +79,8 @@ struct rpmsg_eptdev {
 	spinlock_t queue_lock;
 	struct sk_buff_head queue;
 	wait_queue_head_t readq;
+
+	bool sig_pending;
 };
 
 static int rpmsg_eptdev_destroy(struct device *dev, void *data)
@@ -122,6 +125,19 @@ static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
 	return 0;
 }
 
+static int rpmsg_sigs_cb(struct rpmsg_device *rpdev, void *priv,
+			 u32 old, u32 new)
+{
+	struct rpmsg_eptdev *eptdev = priv;
+
+	eptdev->sig_pending = true;
+
+	/* wake up any blocking processes, waiting for signal notification */
+	wake_up_interruptible(&eptdev->readq);
+	return 0;
+}
+
+
 static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 {
 	struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
@@ -138,6 +154,7 @@ static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
 		return -EINVAL;
 	}
 
+	ept->sig_cb = rpmsg_sigs_cb;
 	eptdev->ept = ept;
 	filp->private_data = eptdev;
 
@@ -156,6 +173,7 @@ static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
 		eptdev->ept = NULL;
 	}
 	mutex_unlock(&eptdev->ept_lock);
+	eptdev->sig_pending = false;
 
 	/* Discard all SKBs */
 	skb_queue_purge(&eptdev->queue);
@@ -266,6 +284,9 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
 	if (!skb_queue_empty(&eptdev->queue))
 		mask |= EPOLLIN | EPOLLRDNORM;
 
+	if (eptdev->sig_pending)
+		mask |= POLLPRI;
+
 	mask |= rpmsg_poll(eptdev->ept, filp, wait);
 
 	return mask;
@@ -309,6 +330,7 @@ static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
 
 	switch (cmd) {
 	case TIOCMGET:
+		eptdev->sig_pending = false;
 		ret = rpmsg_get_signals(eptdev->ept);
 		if (ret >= 0)
 			ret = put_user(ret, (int __user *)arg);
-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  2020-05-13  5:11 ` [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Arun Kumar Neelakantam
@ 2020-05-13 17:58   ` kbuild test robot
  2020-05-19 22:33   ` Mathieu Poirier
  1 sibling, 0 replies; 12+ messages in thread
From: kbuild test robot @ 2020-05-13 17:58 UTC (permalink / raw)
  To: Arun Kumar Neelakantam, ohad, bjorn.andersson, clew, sricharan
  Cc: kbuild-all, linux-remoteproc, linux-kernel, Arun Kumar Neelakantam


[-- Attachment #1: Type: text/plain, Size: 2466 bytes --]

Hi Arun,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on linux/master v5.7-rc5 next-20200512]
[cannot apply to rpmsg/for-next]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Arun-Kumar-Neelakantam/Add-TIOCM-Signals-support-for-RPMSG-char-devices/20200513-134544
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 24085f70a6e1b0cb647ec92623284641d8270637
config: alpha-randconfig-r012-20200513 (attached as .config)
compiler: alpha-linux-gcc (GCC) 9.3.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day GCC_VERSION=9.3.0 make.cross ARCH=alpha 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

drivers/rpmsg/rpmsg_char.c: In function 'rpmsg_eptdev_ioctl':
>> drivers/rpmsg/rpmsg_char.c:322:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
322 |   ret = rpmsg_eptdev_destroy(&eptdev->dev, NULL);
|         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/rpmsg/rpmsg_char.c:323:2: note: here
323 |  default:
|  ^~~~~~~

vim +322 drivers/rpmsg/rpmsg_char.c

   303	
   304	static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
   305				       unsigned long arg)
   306	{
   307		struct rpmsg_eptdev *eptdev = fp->private_data;
   308		int ret;
   309	
   310		switch (cmd) {
   311		case TIOCMGET:
   312			ret = rpmsg_get_signals(eptdev->ept);
   313			if (ret >= 0)
   314				ret = put_user(ret, (int __user *)arg);
   315			break;
   316		case TIOCMSET:
   317		case TIOCMBIS:
   318		case TIOCMBIC:
   319			ret = rpmsg_eptdev_tiocmset(fp, cmd, (int __user *)arg);
   320			break;
   321		case RPMSG_DESTROY_EPT_IOCTL:
 > 322			ret = rpmsg_eptdev_destroy(&eptdev->dev, NULL);
   323		default:
   324			ret = -EINVAL;
   325		}
   326	
   327		return ret;
   328	}
   329	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 33481 bytes --]

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V4 1/4] rpmsg: core: Add signal API support
  2020-05-13  5:11 ` [PATCH V4 1/4] rpmsg: core: Add signal API support Arun Kumar Neelakantam
@ 2020-05-19 21:58   ` Mathieu Poirier
  0 siblings, 0 replies; 12+ messages in thread
From: Mathieu Poirier @ 2020-05-19 21:58 UTC (permalink / raw)
  To: Arun Kumar Neelakantam
  Cc: ohad, bjorn.andersson, clew, sricharan, linux-remoteproc, linux-kernel

Hi Arun,

On Wed, May 13, 2020 at 10:41:08AM +0530, Arun Kumar Neelakantam wrote:
> Some transports like Glink support the state notifications between
> clients using signals similar to serial protocol signals.
>

This changelog could use some more meat around the bone.  For someone not
familiar with Glink, I have to guess what is happening.
 
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> ---
>  drivers/rpmsg/rpmsg_core.c     | 41 +++++++++++++++++++++++++++++++++++++++++
>  drivers/rpmsg/rpmsg_internal.h |  5 +++++
>  include/linux/rpmsg.h          | 26 ++++++++++++++++++++++++++
>  3 files changed, 72 insertions(+)
> 
> diff --git a/drivers/rpmsg/rpmsg_core.c b/drivers/rpmsg/rpmsg_core.c
> index d6c3275..453790b 100644
> --- a/drivers/rpmsg/rpmsg_core.c
> +++ b/drivers/rpmsg/rpmsg_core.c
> @@ -2,6 +2,7 @@
>  /*
>   * remote processor messaging bus
>   *
> + * Copyright (c) 2018, The Linux Foundation.

What is the reason for adding this copyright?

>   * Copyright (C) 2011 Texas Instruments, Inc.
>   * Copyright (C) 2011 Google, Inc.
>   *
> @@ -283,6 +284,42 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
>  }
>  EXPORT_SYMBOL(rpmsg_trysend_offchannel);
>  
> +/**
> + * rpmsg_get_signals() - get the signals for this endpoint
> + * @ept:	the rpmsg endpoint
> + *
> + * Returns signal bits on success and an appropriate error value on failure.
> + */
> +int rpmsg_get_signals(struct rpmsg_endpoint *ept)
> +{
> +	if (WARN_ON(!ept))
> +		return -EINVAL;
> +	if (!ept->ops->get_signals)
> +		return -EOPNOTSUPP;

All other accessors return -ENXIO when the ops is not defined, please do the
same.

> +
> +	return ept->ops->get_signals(ept);
> +}
> +EXPORT_SYMBOL(rpmsg_get_signals);
> +
> +/**
> + * rpmsg_set_signals() - set the remote signals for this endpoint
> + * @ept:	the rpmsg endpoint
> + * @set:	set mask for signals
> + * @clear:	clear mask for signals
> + *
> + * Returns 0 on success and an appropriate error value on failure.
> + */
> +int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear)
> +{
> +	if (WARN_ON(!ept))
> +		return -EINVAL;
> +	if (!ept->ops->set_signals)
> +		return -EOPNOTSUPP;
> +
> +	return ept->ops->set_signals(ept, set, clear);
> +}
> +EXPORT_SYMBOL(rpmsg_set_signals);
> +
>  /*
>   * match an rpmsg channel with a channel info struct.
>   * this is used to make sure we're not creating rpmsg devices for channels
> @@ -468,6 +505,10 @@ static int rpmsg_dev_probe(struct device *dev)
>  
>  		rpdev->ept = ept;
>  		rpdev->src = ept->addr;
> +
> +		if (rpdrv->signals)
> +			ept->sig_cb = rpdrv->signals;
> +

Here I am assuming the signal interface replaces the RPMSG namespace discovery
protocol enacted by solutions where virtio devices are used.  Please add enough
comments to the code, especially in the core, so that people don't have to
guess what is going on. 

>  	}
>  
>  	err = rpdrv->probe(rpdev);
> diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
> index 3fc83cd..8958d6c 100644
> --- a/drivers/rpmsg/rpmsg_internal.h
> +++ b/drivers/rpmsg/rpmsg_internal.h
> @@ -2,6 +2,7 @@
>  /*
>   * remote processor messaging bus internals
>   *
> + * Copyright (c) 2018, The Linux Foundation.
>   * Copyright (C) 2011 Texas Instruments, Inc.
>   * Copyright (C) 2011 Google, Inc.
>   *
> @@ -47,6 +48,8 @@ struct rpmsg_device_ops {
>   * @trysendto:		see @rpmsg_trysendto(), optional
>   * @trysend_offchannel:	see @rpmsg_trysend_offchannel(), optional
>   * @poll:		see @rpmsg_poll(), optional
> + * @get_signals:	see @rpmsg_get_signals(), optional
> + * @set_signals:	see @rpmsg_set_signals(), optional
>   *
>   * Indirection table for the operations that a rpmsg backend should implement.
>   * In addition to @destroy_ept, the backend must at least implement @send and
> @@ -66,6 +69,8 @@ struct rpmsg_endpoint_ops {
>  			     void *data, int len);
>  	__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
>  			     poll_table *wait);
> +	int (*get_signals)(struct rpmsg_endpoint *ept);
> +	int (*set_signals)(struct rpmsg_endpoint *ept, u32 set, u32 clear);
>  };
>  
>  int rpmsg_register_device(struct rpmsg_device *rpdev);
> diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
> index 9fe156d..48c8ae3 100644
> --- a/include/linux/rpmsg.h
> +++ b/include/linux/rpmsg.h
> @@ -2,6 +2,7 @@
>  /*
>   * Remote processor messaging
>   *
> + * Copyright (c) 2018 The Linux Foundation.
>   * Copyright (C) 2011 Texas Instruments, Inc.
>   * Copyright (C) 2011 Google, Inc.
>   * All rights reserved.
> @@ -60,6 +61,7 @@ struct rpmsg_device {
>  };
>  
>  typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
> +typedef int (*rpmsg_rx_sig_t)(struct rpmsg_device *, void *, u32, u32);
>  
>  /**
>   * struct rpmsg_endpoint - binds a local rpmsg address to its user
> @@ -67,6 +69,7 @@ typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
>   * @refcount: when this drops to zero, the ept is deallocated
>   * @cb: rx callback handler
>   * @cb_lock: must be taken before accessing/changing @cb
> + * @sig_cb: rx serial signal handler
>   * @addr: local rpmsg address
>   * @priv: private data for the driver's use
>   *
> @@ -89,6 +92,7 @@ struct rpmsg_endpoint {
>  	struct kref refcount;
>  	rpmsg_rx_cb_t cb;
>  	struct mutex cb_lock;
> +	rpmsg_rx_sig_t sig_cb;

No locking is required in case of signals?

>  	u32 addr;
>  	void *priv;
>  
> @@ -102,6 +106,7 @@ struct rpmsg_endpoint {
>   * @probe: invoked when a matching rpmsg channel (i.e. device) is found
>   * @remove: invoked when the rpmsg channel is removed
>   * @callback: invoked when an inbound message is received on the channel
> + * @signals: invoked when a serial signal change is received on the channel
>   */
>  struct rpmsg_driver {
>  	struct device_driver drv;
> @@ -109,6 +114,7 @@ struct rpmsg_driver {
>  	int (*probe)(struct rpmsg_device *dev);
>  	void (*remove)(struct rpmsg_device *dev);
>  	int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
> +	int (*signals)(struct rpmsg_device *, void *, u32, u32);

This line generates checkpatch warnings.  Please fix all checkpatch warnings
before sending a patchset. 

>  };
>  
>  #if IS_ENABLED(CONFIG_RPMSG)
> @@ -135,6 +141,9 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
>  __poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
>  			poll_table *wait);
>  
> +int rpmsg_get_signals(struct rpmsg_endpoint *ept);
> +int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear);
> +
>  #else
>  
>  static inline int register_rpmsg_device(struct rpmsg_device *dev)
> @@ -242,6 +251,23 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept,
>  	return 0;
>  }
>  
> +static inline int rpmsg_get_signals(struct rpmsg_endpoint *ept)
> +{
> +	/* This shouldn't be possible */
> +	WARN_ON(1);
> +
> +	return -ENXIO;
> +}
> +
> +static inline int rpmsg_set_signals(struct rpmsg_endpoint *ept,
> +				    u32 set, u32 clear)
> +{
> +	/* This shouldn't be possible */
> +	WARN_ON(1);
> +
> +	return -ENXIO;
> +}
> +
>  #endif /* IS_ENABLED(CONFIG_RPMSG) */
>  
>  /* use a macro to avoid include chaining to get THIS_MODULE */
> -- 
> 2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V4 2/4] rpmsg: glink: Add support to handle signals command
  2020-05-13  5:11 ` [PATCH V4 2/4] rpmsg: glink: Add support to handle signals command Arun Kumar Neelakantam
@ 2020-05-19 22:20   ` Mathieu Poirier
  0 siblings, 0 replies; 12+ messages in thread
From: Mathieu Poirier @ 2020-05-19 22:20 UTC (permalink / raw)
  To: Arun Kumar Neelakantam
  Cc: ohad, bjorn.andersson, clew, sricharan, linux-remoteproc,
	linux-kernel, Andy Gross, open list:ARM/QUALCOMM SUPPORT

On Wed, May 13, 2020 at 10:41:09AM +0530, Arun Kumar Neelakantam wrote:
> Remote peripherals send signal notifications over glink with commandID 15.
> 
> Add support to send and receive the signal command and convert the signals
> from NATIVE to TIOCM while receiving and vice versa while sending.
> 
> Signed-off-by: Chris Lew <clew@codeaurora.org>
> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> ---
>  drivers/rpmsg/qcom_glink_native.c | 126 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 126 insertions(+)
> 
> diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
> index fc8ef66..68e039a 100644
> --- a/drivers/rpmsg/qcom_glink_native.c
> +++ b/drivers/rpmsg/qcom_glink_native.c
> @@ -1,5 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
> + * Copyright (c) 2018, The Linux Foundation.

Again, not sure what this is for.

>   * Copyright (c) 2016-2017, Linaro Ltd
>   */
>  
> @@ -17,6 +18,7 @@
>  #include <linux/rpmsg.h>
>  #include <linux/sizes.h>
>  #include <linux/slab.h>
> +#include <linux/termios.h>
>  #include <linux/workqueue.h>
>  #include <linux/mailbox_client.h>
>  
> @@ -150,6 +152,8 @@ enum {
>   * @intent_req_lock: Synchronises multiple intent requests
>   * @intent_req_result: Result of intent request
>   * @intent_req_comp: Completion for intent_req signalling
> + * @lsigs:	local side signals
> + * @rsigs:	remote side signals
>   */
>  struct glink_channel {
>  	struct rpmsg_endpoint ept;
> @@ -181,6 +185,10 @@ struct glink_channel {
>  	struct mutex intent_req_lock;
>  	bool intent_req_result;
>  	struct completion intent_req_comp;
> +
> +	unsigned int lsigs;
> +	unsigned int rsigs;
> +
>  };
>  
>  #define to_glink_channel(_ept) container_of(_ept, struct glink_channel, ept)
> @@ -201,9 +209,15 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops;
>  #define RPM_CMD_TX_DATA_CONT		12
>  #define RPM_CMD_READ_NOTIF		13
>  #define RPM_CMD_RX_DONE_W_REUSE		14
> +#define RPM_CMD_SIGNALS			15
>  
>  #define GLINK_FEATURE_INTENTLESS	BIT(1)
>  
> +#define NATIVE_DTR_SIG	BIT(31)
> +#define NATIVE_CTS_SIG	BIT(30)
> +#define NATIVE_CD_SIG	BIT(29)
> +#define NATIVE_RI_SIG	BIT(28)

Please align theres with the BIT(1) of _INTENTLESS.

> +
>  static void qcom_glink_rx_done_work(struct work_struct *work);
>  
>  static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink,
> @@ -975,6 +989,76 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
>  	return 0;
>  }
>  
> +/**
> + * qcom_glink_send_signals() - convert a signal  cmd to wire format and transmit

s/signal  cmd/signal cmd

> + * @glink:	The transport to transmit on.
> + * @channel:	The glink channel
> + * @sigs:	The signals to encode.
> + *
> + * Return: 0 on success or standard Linux error code.
> + */
> +static int qcom_glink_send_signals(struct qcom_glink *glink,
> +				   struct glink_channel *channel,
> +				   u32 sigs)
> +{
> +	struct glink_msg msg;
> +
> +	/* convert signals from TIOCM to NATIVE */
> +	sigs &= 0x0fff;
> +	if (sigs & TIOCM_DTR)
> +		sigs |= NATIVE_DTR_SIG;
> +	if (sigs & TIOCM_RTS)
> +		sigs |= NATIVE_CTS_SIG;
> +	if (sigs & TIOCM_CD)
> +		sigs |= NATIVE_CD_SIG;
> +	if (sigs & TIOCM_RI)
> +		sigs |= NATIVE_RI_SIG;
> +
> +	msg.cmd = cpu_to_le16(RPM_CMD_SIGNALS);
> +	msg.param1 = cpu_to_le16(channel->lcid);
> +	msg.param2 = cpu_to_le32(sigs);
> +
> +	return qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true);
> +}
> +
> +static int qcom_glink_handle_signals(struct qcom_glink *glink,
> +				     unsigned int rcid, unsigned int signals)
> +{
> +	struct glink_channel *channel;
> +	unsigned long flags;
> +	u32 old;
> +
> +	spin_lock_irqsave(&glink->idr_lock, flags);
> +	channel = idr_find(&glink->rcids, rcid);
> +	spin_unlock_irqrestore(&glink->idr_lock, flags);
> +	if (!channel) {
> +		dev_err(glink->dev, "signal for non-existing channel\n");
> +		return -EINVAL;
> +	}
> +
> +	old = channel->rsigs;
> +
> +	/* convert signals from NATIVE to TIOCM */
> +	if (signals & NATIVE_DTR_SIG)
> +		signals |= TIOCM_DSR;

In qcom_glink_send_signals(), TIOCM_DTR (and not TIOCM_DSR) converts to
NATIVE_DTR_SIG.  

> +	if (signals & NATIVE_CTS_SIG)
> +		signals |= TIOCM_CTS;

Similarly, NATIVE_CTS_SIG converts to TIOCM_RTS.  I would have expected to have
a match between what gets sent and what comes back up.  If this is intentional
please at some comments to justify your choices.

> +	if (signals & NATIVE_CD_SIG)
> +		signals |= TIOCM_CD;
> +	if (signals & NATIVE_RI_SIG)
> +		signals |= TIOCM_RI;
> +	signals &= 0x0fff;
> +
> +	channel->rsigs = signals;
> +
> +	if (channel->ept.sig_cb) {
> +		channel->ept.sig_cb(channel->ept.rpdev, channel->ept.priv,
> +				    old, channel->rsigs);

What is the relevance of old and channel->rsigs?  They are certainly not used in
patch 4.

> +	}
> +
> +	return 0;
> +}
> +
>  static irqreturn_t qcom_glink_native_intr(int irq, void *data)
>  {
>  	struct qcom_glink *glink = data;
> @@ -1036,6 +1120,10 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data)
>  			qcom_glink_handle_intent_req_ack(glink, param1, param2);
>  			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
>  			break;
> +		case RPM_CMD_SIGNALS:
> +			qcom_glink_handle_signals(glink, param1, param2);
> +			qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8));
> +			break;
>  		default:
>  			dev_err(glink->dev, "unhandled rx cmd: %d\n", cmd);
>  			ret = -EINVAL;
> @@ -1340,6 +1428,42 @@ static int qcom_glink_trysend(struct rpmsg_endpoint *ept, void *data, int len)
>  	return __qcom_glink_send(channel, data, len, false);
>  }
>  
> +static int qcom_glink_get_sigs(struct rpmsg_endpoint *ept)
> +{
> +	struct glink_channel *channel = to_glink_channel(ept);
> +
> +	return channel->rsigs;
> +}
> +
> +static int qcom_glink_set_sigs(struct rpmsg_endpoint *ept, u32 set, u32 clear)
> +{
> +	struct glink_channel *channel = to_glink_channel(ept);
> +	struct qcom_glink *glink = channel->glink;
> +	u32 sigs = channel->lsigs;
> +
> +	if (set & TIOCM_DTR)
> +		sigs |= TIOCM_DTR;
> +	if (set & TIOCM_RTS)
> +		sigs |= TIOCM_RTS;
> +	if (set & TIOCM_CD)
> +		sigs |= TIOCM_CD;
> +	if (set & TIOCM_RI)
> +		sigs |= TIOCM_RI;
> +
> +	if (clear & TIOCM_DTR)
> +		sigs &= ~TIOCM_DTR;
> +	if (clear & TIOCM_RTS)
> +		sigs &= ~TIOCM_RTS;
> +	if (clear & TIOCM_CD)
> +		sigs &= ~TIOCM_CD;
> +	if (clear & TIOCM_RI)
> +		sigs &= ~TIOCM_RI;
> +
> +	channel->lsigs = sigs;
> +
> +	return qcom_glink_send_signals(glink, channel, sigs);
> +}
> +
>  /*
>   * Finds the device_node for the glink child interested in this channel.
>   */
> @@ -1373,6 +1497,8 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops = {
>  	.destroy_ept = qcom_glink_destroy_ept,
>  	.send = qcom_glink_send,
>  	.trysend = qcom_glink_trysend,
> +	.get_signals = qcom_glink_get_sigs,
> +	.set_signals = qcom_glink_set_sigs,
>  };
>  
>  static void qcom_glink_rpdev_release(struct device *dev)
> -- 
> 2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  2020-05-13  5:11 ` [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Arun Kumar Neelakantam
  2020-05-13 17:58   ` kbuild test robot
@ 2020-05-19 22:33   ` Mathieu Poirier
  1 sibling, 0 replies; 12+ messages in thread
From: Mathieu Poirier @ 2020-05-19 22:33 UTC (permalink / raw)
  To: Arun Kumar Neelakantam
  Cc: ohad, bjorn.andersson, clew, sricharan, linux-remoteproc, linux-kernel

On Wed, May 13, 2020 at 10:41:10AM +0530, Arun Kumar Neelakantam wrote:
> Add TICOMGET and TIOCMSET ioctl support for rpmsg char device nodes

s/TICOMGET/TIOCMGET

> to get/set the low level transport signals.
> 
> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
> ---
>  drivers/rpmsg/rpmsg_char.c | 53 +++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 50 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/rpmsg/rpmsg_char.c b/drivers/rpmsg/rpmsg_char.c
> index 4bbbacd..e2f92f3 100644
> --- a/drivers/rpmsg/rpmsg_char.c
> +++ b/drivers/rpmsg/rpmsg_char.c
> @@ -1,5 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0
>  /*
> + * Copyright (c) 2018, The Linux Foundation.
>   * Copyright (c) 2016, Linaro Ltd.
>   * Copyright (c) 2012, Michal Simek <monstr@monstr.eu>
>   * Copyright (c) 2012, PetaLogix
> @@ -19,6 +20,7 @@
>  #include <linux/rpmsg.h>
>  #include <linux/skbuff.h>
>  #include <linux/slab.h>
> +#include <linux/termios.h>
>  #include <linux/uaccess.h>
>  #include <uapi/linux/rpmsg.h>
>  
> @@ -269,15 +271,60 @@ static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
>  	return mask;
>  }
>  
> +static int rpmsg_eptdev_tiocmset(struct file *fp, unsigned int cmd,
> +				 int __user *arg)
> +{
> +	struct rpmsg_eptdev *eptdev = fp->private_data;
> +	u32 set, clear, val;
> +	int ret;
> +
> +	ret = get_user(val, arg);
> +	if (ret)
> +		return ret;
> +	set = clear = 0;
> +	switch (cmd) {
> +	case TIOCMBIS:
> +		set = val;
> +		break;
> +	case TIOCMBIC:
> +		clear = val;
> +		break;
> +	case TIOCMSET:
> +		set = val;
> +		clear = ~val;
> +		break;
> +	}
> +
> +	set &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
> +	clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_CD | TIOCM_RI;
> +
> +	return rpmsg_set_signals(eptdev->ept, set, clear);
> +}
> +
>  static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
>  			       unsigned long arg)
>  {
>  	struct rpmsg_eptdev *eptdev = fp->private_data;
> +	int ret;
>  
> -	if (cmd != RPMSG_DESTROY_EPT_IOCTL)
> -		return -EINVAL;
> +	switch (cmd) {
> +	case TIOCMGET:
> +		ret = rpmsg_get_signals(eptdev->ept);
> +		if (ret >= 0)
> +			ret = put_user(ret, (int __user *)arg);
> +		break;
> +	case TIOCMSET:
> +	case TIOCMBIS:
> +	case TIOCMBIC:
> +		ret = rpmsg_eptdev_tiocmset(fp, cmd, (int __user *)arg);
> +		break;
> +	case RPMSG_DESTROY_EPT_IOCTL:
> +		ret = rpmsg_eptdev_destroy(&eptdev->dev, NULL);
> +	default:
> +		ret = -EINVAL;
> +	}
>  
> -	return rpmsg_eptdev_destroy(&eptdev->dev, NULL);
> +	return ret;
>  }
>  
>  static const struct file_operations rpmsg_eptdev_fops = {
> -- 
> 2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices
  2020-05-13  5:11 [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Arun Kumar Neelakantam
                   ` (3 preceding siblings ...)
  2020-05-13  5:11 ` [PATCH V4 4/4] rpmsg: char: Add signal callback and POLLPRI support Arun Kumar Neelakantam
@ 2020-05-19 22:49 ` Mathieu Poirier
  4 siblings, 0 replies; 12+ messages in thread
From: Mathieu Poirier @ 2020-05-19 22:49 UTC (permalink / raw)
  To: Arun Kumar Neelakantam
  Cc: ohad, bjorn.andersson, clew, sricharan, linux-remoteproc, linux-kernel

On Wed, May 13, 2020 at 10:41:07AM +0530, Arun Kumar Neelakantam wrote:
> Glink transport support signals to exchange state notification between
> local and remote side clients. Adding support to send/receive the signal
> command and notify the clients through callback and POLL notification.

From a general point of view it is hard to have an understanding of what this
patchset does and if it is the right solution due to a lack of context.

The cover letter and changelogs are sparse to a point where a
reviewer not familiar with the QC/Glink implementation can't offer much more
than syntactic comments.

Thanks,
Mathieu

> 
> Changes since v3:
> - Correct the TICOMGET case handling as per new rpmsg_get_signals prototype
> - Update the rpmsg_get_signals function header
> 
> Changes since v2:
> - Modify the rpmsg_get_signals function prototype
> 
> Changes since v1:
> - Split the patches as per functional areas like core, char, glink
> - Add set, clear mask for TIOCMSET
> - Merge the char signal callback and POLLPRI patches
> 
> Arun Kumar Neelakantam (4):
>   rpmsg: core: Add signal API support
>   rpmsg: glink: Add support to handle signals command
>   rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
>   rpmsg: char: Add signal callback and POLLPRI support
> 
>  drivers/rpmsg/qcom_glink_native.c | 126 ++++++++++++++++++++++++++++++++++++++
>  drivers/rpmsg/rpmsg_char.c        |  75 ++++++++++++++++++++++-
>  drivers/rpmsg/rpmsg_core.c        |  41 +++++++++++++
>  drivers/rpmsg/rpmsg_internal.h    |   5 ++
>  include/linux/rpmsg.h             |  26 ++++++++
>  5 files changed, 270 insertions(+), 3 deletions(-)
> 
> -- 
> 2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices
@ 2019-11-22 10:06 Arun Kumar Neelakantam
  0 siblings, 0 replies; 12+ messages in thread
From: Arun Kumar Neelakantam @ 2019-11-22 10:06 UTC (permalink / raw)
  To: ohad, bjorn.andersson, clew, sricharan
  Cc: linux-remoteproc, linux-kernel, Arun Kumar Neelakantam

Glink transport support signals to exchange state notification between
local and remote side clients. Adding support to send/receive the signal
command and notify the clients through callback and POLL notification.

Changes since v3:
- Correct the TICOMGET case handling as per new rpmsg_get_signals prototype
- Update the rpmsg_get_signals function header

Changes since v2:
- Modify the rpmsg_get_signals function prototype

Changes since v1:
- Split the patches as per functional areas like core, char, glink
- Add set, clear mask for TIOCMSET
- Merge the char signal callback and POLLPRI patches

Arun Kumar Neelakantam (4):
  rpmsg: core: Add signal API support
  rpmsg: glink: Add support to handle signals command
  rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  rpmsg: char: Add signal callback and POLLPRI support

 drivers/rpmsg/qcom_glink_native.c | 126 ++++++++++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_char.c        |  74 +++++++++++++++++++++-
 drivers/rpmsg/rpmsg_core.c        |  41 +++++++++++++
 drivers/rpmsg/rpmsg_internal.h    |   5 ++
 include/linux/rpmsg.h             |  26 ++++++++
 5 files changed, 269 insertions(+), 3 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices
@ 2019-11-22 10:06 Arun Kumar Neelakantam
  0 siblings, 0 replies; 12+ messages in thread
From: Arun Kumar Neelakantam @ 2019-11-22 10:06 UTC (permalink / raw)
  To: ohad, bjorn.andersson, clew, sricharan
  Cc: linux-remoteproc, linux-kernel, Arun Kumar Neelakantam

Glink transport support signals to exchange state notification between
local and remote side clients. Adding support to send/receive the signal
command and notify the clients through callback and POLL notification.

Changes since v3:
- Correct the TICOMGET case handling as per new rpmsg_get_signals prototype
- Update the rpmsg_get_signals function header

Changes since v2:
- Modify the rpmsg_get_signals function prototype

Changes since v1:
- Split the patches as per functional areas like core, char, glink
- Add set, clear mask for TIOCMSET
- Merge the char signal callback and POLLPRI patches

Arun Kumar Neelakantam (4):
  rpmsg: core: Add signal API support
  rpmsg: glink: Add support to handle signals command
  rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support
  rpmsg: char: Add signal callback and POLLPRI support

 drivers/rpmsg/qcom_glink_native.c | 126 ++++++++++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_char.c        |  74 +++++++++++++++++++++-
 drivers/rpmsg/rpmsg_core.c        |  41 +++++++++++++
 drivers/rpmsg/rpmsg_internal.h    |   5 ++
 include/linux/rpmsg.h             |  26 ++++++++
 5 files changed, 269 insertions(+), 3 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-13  5:11 [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Arun Kumar Neelakantam
2020-05-13  5:11 ` [PATCH V4 1/4] rpmsg: core: Add signal API support Arun Kumar Neelakantam
2020-05-19 21:58   ` Mathieu Poirier
2020-05-13  5:11 ` [PATCH V4 2/4] rpmsg: glink: Add support to handle signals command Arun Kumar Neelakantam
2020-05-19 22:20   ` Mathieu Poirier
2020-05-13  5:11 ` [PATCH V4 3/4] rpmsg: char: Add TIOCMGET/TIOCMSET ioctl support Arun Kumar Neelakantam
2020-05-13 17:58   ` kbuild test robot
2020-05-19 22:33   ` Mathieu Poirier
2020-05-13  5:11 ` [PATCH V4 4/4] rpmsg: char: Add signal callback and POLLPRI support Arun Kumar Neelakantam
2020-05-19 22:49 ` [RESEND PATCH V4 0/4] Add TIOCM Signals support for RPMSG char devices Mathieu Poirier
  -- strict thread matches above, loose matches on Subject: below --
2019-11-22 10:06 Arun Kumar Neelakantam
2019-11-22 10:06 Arun Kumar Neelakantam

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git