From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id DD61AC433E1 for ; Thu, 21 May 2020 18:35:55 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id ACA9F20738 for ; Thu, 21 May 2020 18:35:55 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="F7lfzNAs" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729555AbgEUSfz (ORCPT ); Thu, 21 May 2020 14:35:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37172 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728240AbgEUSfx (ORCPT ); Thu, 21 May 2020 14:35:53 -0400 Received: from mail-pj1-x1041.google.com (mail-pj1-x1041.google.com [IPv6:2607:f8b0:4864:20::1041]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EC734C061A0E for ; Thu, 21 May 2020 11:35:51 -0700 (PDT) Received: by mail-pj1-x1041.google.com with SMTP id n15so3514493pjt.4 for ; Thu, 21 May 2020 11:35:51 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=ig7zxfhUSkqB05IYxSIrq507uXmPNpuFK2Y+gliQt9A=; b=F7lfzNAs9oOD0a7DSu1haQi/iNqO2IWEkYl9YfI0piAkQFfDHJfQLpExOiafPgtX9Y 231oF8BM0E9aL58559ZYPUL7S1bqhjnSpGsp7CviU3eKjlLYRwi61Zj3VryLdQjiVu6U 6vFSdBDgF2zQVcaP/9rh4mJ2zpuQK++ySaO+w+ZQJ2cmLozrgBPSOlMzgLmry0bOq1tT inmSXRl641NQgmP7enG0o5XQsNkD4X3BErxmCrpzjFaNptJq0npcjMfkIotm8Q5vJRg8 iSY+cpa2zwd2mslzf1gwfigWj53DlSuYasQzrqxzqyd4D+4U0XSHq9AuDmy8v5yI1F5T Tuow== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=ig7zxfhUSkqB05IYxSIrq507uXmPNpuFK2Y+gliQt9A=; b=fqEGKv+oSiPQdSVPxld1XFlKPg68qqlywTRJlXaAAvvku+7RYiUfqy/eUdImoUhg0c zP4zc89ijyW78fIfM3HstXtDB87BdXVh1hwMLu4i61NQ47B4DtETMAaHPU84NsF5iQ3z K8ar6uTIfanraoPRJKo8oeBwCN3K9H9kaFLBNMtyxK/yetTzMNN/pB0TvrNWlSRyRxM6 59tNARQLM445dqjqSxhKqFS2cVBlef6zveP/lsRWhusKWn1oN1YBSDPQxSgQMINetd3m 9Ww4Y7LmzSrW5Ff+GJrFyDkOrMh4Q7mfoR8VyC6mRoYrKydAiIncAc4twaD0KA1s/isg MqBw== X-Gm-Message-State: AOAM533jaT7HeDYf4lZWb3PW7387yCUCriF61yWXG2ecSzHd0b1IVTqc Vsib4LQ2QSSpV9BPUf4L1qOlfw== X-Google-Smtp-Source: ABdhPJyuXJgWTHo3Sjv7mxYYbipM7XN8nG5MLmgZQd5Nyoj38+aT/ytfgypMqB3JTsL7ZFcXqrEhAg== X-Received: by 2002:a17:90a:a608:: with SMTP id c8mr12715239pjq.90.1590086150818; Thu, 21 May 2020 11:35:50 -0700 (PDT) Received: from builder.lan (104-188-17-28.lightspeed.sndgca.sbcglobal.net. [104.188.17.28]) by smtp.gmail.com with ESMTPSA id k24sm5077523pfk.134.2020.05.21.11.35.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 21 May 2020 11:35:49 -0700 (PDT) Date: Thu, 21 May 2020 11:34:32 -0700 From: Bjorn Andersson To: Suman Anna Cc: Rob Herring , Mathieu Poirier , Lokesh Vutla , linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v2 3/4] remoteproc/k3-dsp: Add a remoteproc driver of K3 C66x DSPs Message-ID: <20200521183432.GK408178@builder.lan> References: <20200521001006.2725-1-s-anna@ti.com> <20200521001006.2725-4-s-anna@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20200521001006.2725-4-s-anna@ti.com> Sender: linux-remoteproc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-remoteproc@vger.kernel.org On Wed 20 May 17:10 PDT 2020, Suman Anna wrote: > The Texas Instrument's K3 J721E SoCs have two C66x DSP Subsystems in MAIN > voltage domain that are based on the TI's standard TMS320C66x DSP CorePac > module. Each subsystem has a Fixed/Floating-Point DSP CPU, with 32 KB each > of L1P & L1D SRAMs that can be configured and partitioned as either RAM > and/or Cache, and 288 KB of L2 SRAM with 256 KB of memory configurable as > either RAM and/or Cache. The CorePac also includes an Internal DMA (IDMA), > External Memory Controller (EMC), Extended Memory Controller (XMC) with a > Region Address Translator (RAT) unit for 32-bit to 48-bit address > extension/translations, an Interrupt Controller (INTC) and a Powerdown > Controller (PDC). > > A new remoteproc module is added to perform the device management of > these DSP devices. The support is limited to images using only external > DDR memory at the moment, the loading support to internal memories and > any on-chip RAM memories will be added in a subsequent patch. RAT support > is also left for a future patch, and as such the reserved memory carveout > regions are all expected to be using memory regions within the first 2 GB. > Error Recovery and Power Management features are not currently supported. > > The C66x remote processors do not have an MMU, and so require fixed memory > carveout regions matching the firmware image addresses. Support for this > is provided by mandating multiple memory regions to be attached to the > remoteproc device. The first memory region will be used to serve as the > DMA pool for all dynamic allocations like the vrings and vring buffers. > The remaining memory regions are mapped into the kernel at device probe > time, and are used to provide address translations for firmware image > segments without the need for any RSC_CARVEOUT entries. Any firmware > image using memory outside of the supplied reserved memory carveout > regions will be errored out. > > The driver uses various TI-SCI interfaces to talk to the System Controller > (DMSC) for managing configuration, power and reset management of these > cores. IPC between the A72 cores and the DSP cores is supported through > the virtio rpmsg stack using shared memory and OMAP Mailboxes. > There's room for more devm_ usage, but this looks good to me. Reviewed-by: Bjorn Andersson Regards, Bjorn > Signed-off-by: Suman Anna > --- > v2: > - Dropped the pm_runtime usage > - Replaced the private k3_dsp_rproc_get_firmware() with the newly introduced > rproc_of_parse_firmware() > - Addressed other minor comments from Mathieu - Revised help on Kconfig, reordered > header files, whitespace indentation fixes, remove the stale memset comment on > internal memories, renamed struct k3_dsp_rproc_mem to struct k3_dsp_mem. > v1: https://patchwork.kernel.org/patch/11458577/ > > drivers/remoteproc/Kconfig | 13 + > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/ti_k3_dsp_remoteproc.c | 701 ++++++++++++++++++++++ > 3 files changed, 715 insertions(+) > create mode 100644 drivers/remoteproc/ti_k3_dsp_remoteproc.c > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig > index 2c9fb870a276..ef787774b52b 100644 > --- a/drivers/remoteproc/Kconfig > +++ b/drivers/remoteproc/Kconfig > @@ -265,6 +265,19 @@ config TI_K3_R5_REMOTEPROC > It's safe to say N here if you're not interested in utilizing > a slave processor > > +config TI_K3_DSP_REMOTEPROC > + tristate "TI K3 DSP remoteproc support" > + depends on ARCH_K3 > + select MAILBOX > + select OMAP2PLUS_MBOX > + help > + Say m here to support TI's C66x and C71x DSP remote processor > + subsystems on various TI K3 family of SoCs through the remote > + processor framework. > + > + It's safe to say N here if you're not interested in utilizing > + the DSP slave processors. > + > endif # REMOTEPROC > > endmenu > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile > index ea0c6812e4fc..9f87d222744c 100644 > --- a/drivers/remoteproc/Makefile > +++ b/drivers/remoteproc/Makefile > @@ -31,3 +31,4 @@ obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o > obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o > obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o > obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o > +obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o > diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c > new file mode 100644 > index 000000000000..e4036f5992fe > --- /dev/null > +++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c > @@ -0,0 +1,701 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * TI K3 DSP Remote Processor(s) driver > + * > + * Copyright (C) 2018-2020 Texas Instruments Incorporated - http://www.ti.com/ > + * Suman Anna > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "omap_remoteproc.h" > +#include "remoteproc_internal.h" > +#include "ti_sci_proc.h" > + > +#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1) > + > +/** > + * struct k3_dsp_mem - internal memory structure > + * @cpu_addr: MPU virtual address of the memory region > + * @bus_addr: Bus address used to access the memory region > + * @dev_addr: Device address of the memory region from DSP view > + * @size: Size of the memory region > + */ > +struct k3_dsp_mem { > + void __iomem *cpu_addr; > + phys_addr_t bus_addr; > + u32 dev_addr; > + size_t size; > +}; > + > +/** > + * struct k3_dsp_mem_data - memory definitions for a DSP > + * @name: name for this memory entry > + * @dev_addr: device address for the memory entry > + */ > +struct k3_dsp_mem_data { > + const char *name; > + const u32 dev_addr; > +}; > + > +/** > + * struct k3_dsp_dev_data - device data structure for a DSP > + * @mems: pointer to memory definitions for a DSP > + * @num_mems: number of memory regions in @mems > + * @boot_align_addr: boot vector address alignment granularity > + * @uses_lreset: flag to denote the need for local reset management > + */ > +struct k3_dsp_dev_data { > + const struct k3_dsp_mem_data *mems; > + u32 num_mems; > + u32 boot_align_addr; > + bool uses_lreset; > +}; > + > +/** > + * struct k3_dsp_rproc - k3 DSP remote processor driver structure > + * @dev: cached device pointer > + * @rproc: remoteproc device handle > + * @mem: internal memory regions data > + * @num_mems: number of internal memory regions > + * @rmem: reserved memory regions data > + * @num_rmems: number of reserved memory regions > + * @reset: reset control handle > + * @data: pointer to DSP-specific device data > + * @tsp: TI-SCI processor control handle > + * @ti_sci: TI-SCI handle > + * @ti_sci_id: TI-SCI device identifier > + * @mbox: mailbox channel handle > + * @client: mailbox client to request the mailbox channel > + */ > +struct k3_dsp_rproc { > + struct device *dev; > + struct rproc *rproc; > + struct k3_dsp_mem *mem; > + int num_mems; > + struct k3_dsp_mem *rmem; > + int num_rmems; > + struct reset_control *reset; > + const struct k3_dsp_dev_data *data; > + struct ti_sci_proc *tsp; > + const struct ti_sci_handle *ti_sci; > + u32 ti_sci_id; > + struct mbox_chan *mbox; > + struct mbox_client client; > +}; > + > +/** > + * k3_dsp_rproc_mbox_callback() - inbound mailbox message handler > + * @client: mailbox client pointer used for requesting the mailbox channel > + * @data: mailbox payload > + * > + * This handler is invoked by the OMAP mailbox driver whenever a mailbox > + * message is received. Usually, the mailbox payload simply contains > + * the index of the virtqueue that is kicked by the remote processor, > + * and we let remoteproc core handle it. > + * > + * In addition to virtqueue indices, we also have some out-of-band values > + * that indicate different events. Those values are deliberately very > + * large so they don't coincide with virtqueue indices. > + */ > +static void k3_dsp_rproc_mbox_callback(struct mbox_client *client, void *data) > +{ > + struct k3_dsp_rproc *kproc = container_of(client, struct k3_dsp_rproc, > + client); > + struct device *dev = kproc->rproc->dev.parent; > + const char *name = kproc->rproc->name; > + u32 msg = omap_mbox_message(data); > + > + dev_dbg(dev, "mbox msg: 0x%x\n", msg); > + > + switch (msg) { > + case RP_MBOX_CRASH: > + /* > + * remoteproc detected an exception, but error recovery is not > + * supported. So, just log this for now > + */ > + dev_err(dev, "K3 DSP rproc %s crashed\n", name); > + break; > + case RP_MBOX_ECHO_REPLY: > + dev_info(dev, "received echo reply from %s\n", name); > + break; > + default: > + /* silently handle all other valid messages */ > + if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG) > + return; > + if (msg > kproc->rproc->max_notifyid) { > + dev_dbg(dev, "dropping unknown message 0x%x", msg); > + return; > + } > + /* msg contains the index of the triggered vring */ > + if (rproc_vq_interrupt(kproc->rproc, msg) == IRQ_NONE) > + dev_dbg(dev, "no message was found in vqid %d\n", msg); > + } > +} > + > +/* > + * Kick the remote processor to notify about pending unprocessed messages. > + * The vqid usage is not used and is inconsequential, as the kick is performed > + * through a simulated GPIO (a bit in an IPC interrupt-triggering register), > + * the remote processor is expected to process both its Tx and Rx virtqueues. > + */ > +static void k3_dsp_rproc_kick(struct rproc *rproc, int vqid) > +{ > + struct k3_dsp_rproc *kproc = rproc->priv; > + struct device *dev = rproc->dev.parent; > + mbox_msg_t msg = (mbox_msg_t)vqid; > + int ret; > + > + /* send the index of the triggered virtqueue in the mailbox payload */ > + ret = mbox_send_message(kproc->mbox, (void *)msg); > + if (ret < 0) > + dev_err(dev, "failed to send mailbox message, status = %d\n", > + ret); > +} > + > +/* Put the DSP processor into reset */ > +static int k3_dsp_rproc_reset(struct k3_dsp_rproc *kproc) > +{ > + struct device *dev = kproc->dev; > + int ret; > + > + ret = reset_control_assert(kproc->reset); > + if (ret) { > + dev_err(dev, "local-reset assert failed, ret = %d\n", ret); > + return ret; > + } > + > + ret = kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, > + kproc->ti_sci_id); > + if (ret) { > + dev_err(dev, "module-reset assert failed, ret = %d\n", ret); > + if (reset_control_deassert(kproc->reset)) > + dev_warn(dev, "local-reset deassert back failed\n"); > + } > + > + return ret; > +} > + > +/* Release the DSP processor from reset */ > +static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc) > +{ > + struct device *dev = kproc->dev; > + int ret; > + > + ret = kproc->ti_sci->ops.dev_ops.get_device(kproc->ti_sci, > + kproc->ti_sci_id); > + if (ret) { > + dev_err(dev, "module-reset deassert failed, ret = %d\n", ret); > + return ret; > + } > + > + ret = reset_control_deassert(kproc->reset); > + if (ret) { > + dev_err(dev, "local-reset deassert failed, ret = %d\n", ret); > + if (kproc->ti_sci->ops.dev_ops.put_device(kproc->ti_sci, > + kproc->ti_sci_id)) > + dev_warn(dev, "module-reset assert back failed\n"); > + } > + > + return ret; > +} > + > +/* > + * Power up the DSP remote processor. > + * > + * This function will be invoked only after the firmware for this rproc > + * was loaded, parsed successfully, and all of its resource requirements > + * were met. > + */ > +static int k3_dsp_rproc_start(struct rproc *rproc) > +{ > + struct k3_dsp_rproc *kproc = rproc->priv; > + struct mbox_client *client = &kproc->client; > + struct device *dev = kproc->dev; > + u32 boot_addr; > + int ret; > + > + client->dev = dev; > + client->tx_done = NULL; > + client->rx_callback = k3_dsp_rproc_mbox_callback; > + client->tx_block = false; > + client->knows_txdone = false; > + > + kproc->mbox = mbox_request_channel(client, 0); > + if (IS_ERR(kproc->mbox)) { > + ret = -EBUSY; > + dev_err(dev, "mbox_request_channel failed: %ld\n", > + PTR_ERR(kproc->mbox)); > + return ret; > + } > + > + /* > + * Ping the remote processor, this is only for sanity-sake for now; > + * there is no functional effect whatsoever. > + * > + * Note that the reply will _not_ arrive immediately: this message > + * will wait in the mailbox fifo until the remote processor is booted. > + */ > + ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST); > + if (ret < 0) { > + dev_err(dev, "mbox_send_message failed: %d\n", ret); > + goto put_mbox; > + } > + > + boot_addr = rproc->bootaddr; > + if (boot_addr & (kproc->data->boot_align_addr - 1)) { > + dev_err(dev, "invalid boot address 0x%x, must be aligned on a 0x%x boundary\n", > + boot_addr, kproc->data->boot_align_addr); > + ret = -EINVAL; > + goto put_mbox; > + } > + > + dev_err(dev, "booting DSP core using boot addr = 0x%x\n", boot_addr); > + ret = ti_sci_proc_set_config(kproc->tsp, boot_addr, 0, 0); > + if (ret) > + goto put_mbox; > + > + ret = k3_dsp_rproc_release(kproc); > + if (ret) > + goto put_mbox; > + > + return 0; > + > +put_mbox: > + mbox_free_channel(kproc->mbox); > + return ret; > +} > + > +/* > + * Stop the DSP remote processor. > + * > + * This function puts the DSP processor into reset, and finishes processing > + * of any pending messages. > + */ > +static int k3_dsp_rproc_stop(struct rproc *rproc) > +{ > + struct k3_dsp_rproc *kproc = rproc->priv; > + > + mbox_free_channel(kproc->mbox); > + > + k3_dsp_rproc_reset(kproc); > + > + return 0; > +} > + > +/* > + * Custom function to translate a DSP device address (internal RAMs only) to a > + * kernel virtual address. The DSPs can access their RAMs at either an internal > + * address visible only from a DSP, or at the SoC-level bus address. Both these > + * addresses need to be looked through for translation. The translated addresses > + * can be used either by the remoteproc core for loading (when using kernel > + * remoteproc loader), or by any rpmsg bus drivers. > + */ > +static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) > +{ > + struct k3_dsp_rproc *kproc = rproc->priv; > + void __iomem *va = NULL; > + phys_addr_t bus_addr; > + u32 dev_addr, offset; > + size_t size; > + int i; > + > + if (len == 0) > + return NULL; > + > + for (i = 0; i < kproc->num_mems; i++) { > + bus_addr = kproc->mem[i].bus_addr; > + dev_addr = kproc->mem[i].dev_addr; > + size = kproc->mem[i].size; > + > + if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) { > + /* handle DSP-view addresses */ > + if (da >= dev_addr && > + ((da + len) <= (dev_addr + size))) { > + offset = da - dev_addr; > + va = kproc->mem[i].cpu_addr + offset; > + return (__force void *)va; > + } > + } else { > + /* handle SoC-view addresses */ > + if (da >= bus_addr && > + (da + len) <= (bus_addr + size)) { > + offset = da - bus_addr; > + va = kproc->mem[i].cpu_addr + offset; > + return (__force void *)va; > + } > + } > + } > + > + /* handle static DDR reserved memory regions */ > + for (i = 0; i < kproc->num_rmems; i++) { > + dev_addr = kproc->rmem[i].dev_addr; > + size = kproc->rmem[i].size; > + > + if (da >= dev_addr && ((da + len) <= (dev_addr + size))) { > + offset = da - dev_addr; > + va = kproc->rmem[i].cpu_addr + offset; > + return (__force void *)va; > + } > + } > + > + return NULL; > +} > + > +static const struct rproc_ops k3_dsp_rproc_ops = { > + .start = k3_dsp_rproc_start, > + .stop = k3_dsp_rproc_stop, > + .kick = k3_dsp_rproc_kick, > + .da_to_va = k3_dsp_rproc_da_to_va, > +}; > + > +static int k3_dsp_rproc_of_get_memories(struct platform_device *pdev, > + struct k3_dsp_rproc *kproc) > +{ > + const struct k3_dsp_dev_data *data = kproc->data; > + struct device *dev = &pdev->dev; > + struct resource *res; > + int num_mems = 0; > + int i; > + > + num_mems = kproc->data->num_mems; > + kproc->mem = devm_kcalloc(kproc->dev, num_mems, > + sizeof(*kproc->mem), GFP_KERNEL); > + if (!kproc->mem) > + return -ENOMEM; > + > + for (i = 0; i < num_mems; i++) { > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, > + data->mems[i].name); > + if (!res) { > + dev_err(dev, "found no memory resource for %s\n", > + data->mems[i].name); > + return -EINVAL; > + } > + if (!devm_request_mem_region(dev, res->start, > + resource_size(res), > + dev_name(dev))) { > + dev_err(dev, "could not request %s region for resource\n", > + data->mems[i].name); > + return -EBUSY; > + } > + > + kproc->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start, > + resource_size(res)); > + if (IS_ERR(kproc->mem[i].cpu_addr)) { > + dev_err(dev, "failed to map %s memory\n", > + data->mems[i].name); > + return PTR_ERR(kproc->mem[i].cpu_addr); > + } > + kproc->mem[i].bus_addr = res->start; > + kproc->mem[i].dev_addr = data->mems[i].dev_addr; > + kproc->mem[i].size = resource_size(res); > + > + dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %pK da 0x%x\n", > + data->mems[i].name, &kproc->mem[i].bus_addr, > + kproc->mem[i].size, kproc->mem[i].cpu_addr, > + kproc->mem[i].dev_addr); > + } > + kproc->num_mems = num_mems; > + > + return 0; > +} > + > +static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc) > +{ > + struct device *dev = kproc->dev; > + struct device_node *np = dev->of_node; > + struct device_node *rmem_np; > + struct reserved_mem *rmem; > + int num_rmems; > + int ret, i; > + > + num_rmems = of_property_count_elems_of_size(np, "memory-region", > + sizeof(phandle)); > + if (num_rmems <= 0) { > + dev_err(dev, "device does not reserved memory regions, ret = %d\n", > + num_rmems); > + return -EINVAL; > + } > + if (num_rmems < 2) { > + dev_err(dev, "device needs atleast two memory regions to be defined, num = %d\n", > + num_rmems); > + return -EINVAL; > + } > + > + /* use reserved memory region 0 for vring DMA allocations */ > + ret = of_reserved_mem_device_init_by_idx(dev, np, 0); > + if (ret) { > + dev_err(dev, "device cannot initialize DMA pool, ret = %d\n", > + ret); > + return ret; > + } > + > + num_rmems--; > + kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL); > + if (!kproc->rmem) { > + ret = -ENOMEM; > + goto release_rmem; > + } > + > + /* use remaining reserved memory regions for static carveouts */ > + for (i = 0; i < num_rmems; i++) { > + rmem_np = of_parse_phandle(np, "memory-region", i + 1); > + if (!rmem_np) { > + ret = -EINVAL; > + goto unmap_rmem; > + } > + > + rmem = of_reserved_mem_lookup(rmem_np); > + if (!rmem) { > + of_node_put(rmem_np); > + ret = -EINVAL; > + goto unmap_rmem; > + } > + of_node_put(rmem_np); > + > + kproc->rmem[i].bus_addr = rmem->base; > + /* 64-bit address regions currently not supported */ > + kproc->rmem[i].dev_addr = (u32)rmem->base; > + kproc->rmem[i].size = rmem->size; > + kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size); > + if (!kproc->rmem[i].cpu_addr) { > + dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n", > + i + 1, &rmem->base, &rmem->size); > + ret = -ENOMEM; > + goto unmap_rmem; > + } > + > + dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n", > + i + 1, &kproc->rmem[i].bus_addr, > + kproc->rmem[i].size, kproc->rmem[i].cpu_addr, > + kproc->rmem[i].dev_addr); > + } > + kproc->num_rmems = num_rmems; > + > + return 0; > + > +unmap_rmem: > + for (i--; i >= 0; i--) { > + if (kproc->rmem[i].cpu_addr) > + iounmap(kproc->rmem[i].cpu_addr); > + } > + kfree(kproc->rmem); > +release_rmem: > + of_reserved_mem_device_release(kproc->dev); > + return ret; > +} > + > +static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc) > +{ > + int i; > + > + for (i = 0; i < kproc->num_rmems; i++) > + iounmap(kproc->rmem[i].cpu_addr); > + kfree(kproc->rmem); > + > + of_reserved_mem_device_release(kproc->dev); > +} > + > +static > +struct ti_sci_proc *k3_dsp_rproc_of_get_tsp(struct device *dev, > + const struct ti_sci_handle *sci) > +{ > + struct ti_sci_proc *tsp; > + u32 temp[2]; > + int ret; > + > + ret = of_property_read_u32_array(dev->of_node, "ti,sci-proc-ids", > + temp, 2); > + if (ret < 0) > + return ERR_PTR(ret); > + > + tsp = kzalloc(sizeof(*tsp), GFP_KERNEL); > + if (!tsp) > + return ERR_PTR(-ENOMEM); > + > + tsp->dev = dev; > + tsp->sci = sci; > + tsp->ops = &sci->ops.proc_ops; > + tsp->proc_id = temp[0]; > + tsp->host_id = temp[1]; > + > + return tsp; > +} > + > +static int k3_dsp_rproc_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct device_node *np = dev->of_node; > + const struct k3_dsp_dev_data *data; > + struct k3_dsp_rproc *kproc; > + struct rproc *rproc; > + const char *fw_name; > + int ret = 0; > + int ret1; > + > + data = of_device_get_match_data(dev); > + if (!data) > + return -ENODEV; > + > + ret = rproc_of_parse_firmware(dev, 0, &fw_name); > + if (ret) { > + dev_err(dev, "failed to parse firmware-name property, ret = %d\n", > + ret); > + return ret; > + } > + > + rproc = rproc_alloc(dev, dev_name(dev), &k3_dsp_rproc_ops, fw_name, > + sizeof(*kproc)); > + if (!rproc) > + return -ENOMEM; > + > + rproc->has_iommu = false; > + rproc->recovery_disabled = true; > + kproc = rproc->priv; > + kproc->rproc = rproc; > + kproc->dev = dev; > + kproc->data = data; > + > + kproc->ti_sci = ti_sci_get_by_phandle(np, "ti,sci"); > + if (IS_ERR(kproc->ti_sci)) { > + ret = PTR_ERR(kproc->ti_sci); > + if (ret != -EPROBE_DEFER) { > + dev_err(dev, "failed to get ti-sci handle, ret = %d\n", > + ret); > + } > + kproc->ti_sci = NULL; > + goto free_rproc; > + } > + > + ret = of_property_read_u32(np, "ti,sci-dev-id", &kproc->ti_sci_id); > + if (ret) { > + dev_err(dev, "missing 'ti,sci-dev-id' property\n"); > + goto put_sci; > + } > + > + kproc->reset = devm_reset_control_get_exclusive(dev, NULL); > + if (IS_ERR(kproc->reset)) { > + ret = PTR_ERR(kproc->reset); > + dev_err(dev, "failed to get reset, status = %d\n", ret); > + goto put_sci; > + } > + > + kproc->tsp = k3_dsp_rproc_of_get_tsp(dev, kproc->ti_sci); > + if (IS_ERR(kproc->tsp)) { > + dev_err(dev, "failed to construct ti-sci proc control, ret = %d\n", > + ret); > + ret = PTR_ERR(kproc->tsp); > + goto put_sci; > + } > + > + ret = ti_sci_proc_request(kproc->tsp); > + if (ret < 0) { > + dev_err(dev, "ti_sci_proc_request failed, ret = %d\n", ret); > + goto free_tsp; > + } > + > + ret = k3_dsp_rproc_of_get_memories(pdev, kproc); > + if (ret) > + goto release_tsp; > + > + ret = k3_dsp_reserved_mem_init(kproc); > + if (ret) { > + dev_err(dev, "reserved memory init failed, ret = %d\n", ret); > + goto release_tsp; > + } > + > + ret = rproc_add(rproc); > + if (ret) { > + dev_err(dev, "failed to add register device with remoteproc core, status = %d\n", > + ret); > + goto release_mem; > + } > + > + platform_set_drvdata(pdev, kproc); > + > + return 0; > + > +release_mem: > + k3_dsp_reserved_mem_exit(kproc); > +release_tsp: > + ret1 = ti_sci_proc_release(kproc->tsp); > + if (ret1) > + dev_err(dev, "failed to release proc, ret = %d\n", ret1); > +free_tsp: > + kfree(kproc->tsp); > +put_sci: > + ret1 = ti_sci_put_handle(kproc->ti_sci); > + if (ret1) > + dev_err(dev, "failed to put ti_sci handle, ret = %d\n", ret1); > +free_rproc: > + rproc_free(rproc); > + return ret; > +} > + > +static int k3_dsp_rproc_remove(struct platform_device *pdev) > +{ > + struct k3_dsp_rproc *kproc = platform_get_drvdata(pdev); > + struct device *dev = &pdev->dev; > + int ret; > + > + rproc_del(kproc->rproc); > + > + ret = ti_sci_proc_release(kproc->tsp); > + if (ret) > + dev_err(dev, "failed to release proc, ret = %d\n", ret); > + > + kfree(kproc->tsp); > + > + ret = ti_sci_put_handle(kproc->ti_sci); > + if (ret) > + dev_err(dev, "failed to put ti_sci handle, ret = %d\n", ret); > + > + k3_dsp_reserved_mem_exit(kproc); > + rproc_free(kproc->rproc); > + > + return 0; > +} > + > +static const struct k3_dsp_mem_data c66_mems[] = { > + { .name = "l2sram", .dev_addr = 0x800000 }, > + { .name = "l1pram", .dev_addr = 0xe00000 }, > + { .name = "l1dram", .dev_addr = 0xf00000 }, > +}; > + > +static const struct k3_dsp_dev_data c66_data = { > + .mems = c66_mems, > + .num_mems = ARRAY_SIZE(c66_mems), > + .boot_align_addr = SZ_1K, > + .uses_lreset = true, > +}; > + > +static const struct of_device_id k3_dsp_of_match[] = { > + { .compatible = "ti,j721e-c66-dsp", .data = &c66_data, }, > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(of, k3_dsp_of_match); > + > +static struct platform_driver k3_dsp_rproc_driver = { > + .probe = k3_dsp_rproc_probe, > + .remove = k3_dsp_rproc_remove, > + .driver = { > + .name = "k3-dsp-rproc", > + .of_match_table = k3_dsp_of_match, > + }, > +}; > + > +module_platform_driver(k3_dsp_rproc_driver); > + > +MODULE_AUTHOR("Suman Anna "); > +MODULE_LICENSE("GPL v2"); > +MODULE_DESCRIPTION("TI K3 DSP Remoteproc driver"); > -- > 2.26.0 >