Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Alexandre Bailon <abailon@baylibre.com>
Cc: ohad@wizery.com, bjorn.andersson@linaro.org, robh+dt@kernel.org,
	matthias.bgg@gmail.com, linux-remoteproc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/6] remoteproc: Add a remoteproc driver for the MT8183's APU
Date: Mon, 20 Jul 2020 16:19:58 -0600
Message-ID: <20200720221958.GE1113627@xps15> (raw)
In-Reply-To: <20200713132927.24925-3-abailon@baylibre.com>

On Mon, Jul 13, 2020 at 03:29:23PM +0200, Alexandre Bailon wrote:
> This adds a driver to control the APU present in the MT8183.
> This loads the firmware and start the DSP.
> 
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
>  drivers/remoteproc/Kconfig         |  10 +
>  drivers/remoteproc/Makefile        |   1 +
>  drivers/remoteproc/mtk_apu_rproc.c | 308 +++++++++++++++++++++++++++++
>  3 files changed, 319 insertions(+)
>  create mode 100644 drivers/remoteproc/mtk_apu_rproc.c
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index c4d1731295eb..e116d4a12ac3 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -42,6 +42,16 @@ config MTK_SCP
>  
>  	  It's safe to say N here.
>  
> +config MTK_APU
> +	tristate "Mediatek APU remoteproc support"
> +	depends on ARCH_MEDIATEK
> +	depends on MTK_IOMMU
> +	help
> +	  Say y to support the Mediatek's Accelerated Processing Unit (APU) via
> +	  the remote processor framework.
> +
> +	  It's safe to say N here.
> +
>  config OMAP_REMOTEPROC
>  	tristate "OMAP remoteproc support"
>  	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index e8b886e511f0..2ea231b75fa6 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -12,6 +12,7 @@ remoteproc-y				+= remoteproc_elf_loader.o
>  obj-$(CONFIG_IMX_REMOTEPROC)		+= imx_rproc.o
>  obj-$(CONFIG_INGENIC_VPU_RPROC)		+= ingenic_rproc.o
>  obj-$(CONFIG_MTK_SCP)			+= mtk_scp.o mtk_scp_ipi.o
> +obj-$(CONFIG_MTK_APU)			+= mtk_apu_rproc.o
>  obj-$(CONFIG_OMAP_REMOTEPROC)		+= omap_remoteproc.o
>  obj-$(CONFIG_WKUP_M3_RPROC)		+= wkup_m3_rproc.o
>  obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
> diff --git a/drivers/remoteproc/mtk_apu_rproc.c b/drivers/remoteproc/mtk_apu_rproc.c
> new file mode 100644
> index 000000000000..fb416a817ef3
> --- /dev/null
> +++ b/drivers/remoteproc/mtk_apu_rproc.c
> @@ -0,0 +1,308 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 BayLibre SAS
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iommu.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/highmem.h>
> +#include <linux/module.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/remoteproc.h>
> +
> +#include "remoteproc_internal.h"
> +
> +/* From MT8183 4.5 Vision Processor Unit (VPU).pdf datasheet */
> +#define SW_RST					(0x0000000C)
> +#define  SW_RST_OCD_HALT_ON_RST			BIT(12)
> +#define  SW_RST_IPU_D_RST			BIT(8)
> +#define  SW_RST_IPU_B_RST			BIT(4)
> +#define CORE_CTRL				(0x00000110)
> +#define  CORE_CTRL_PDEBUG_ENABLE		BIT(31)
> +#define	 CORE_CTRL_SRAM_64K_iMEM		(0x00 << 27)
> +#define	 CORE_CTRL_SRAM_96K_iMEM		(0x01 << 27)
> +#define	 CORE_CTRL_SRAM_128K_iMEM		(0x02 << 27)
> +#define	 CORE_CTRL_SRAM_192K_iMEM		(0x03 << 27)
> +#define	 CORE_CTRL_SRAM_256K_iMEM		(0x04 << 27)
> +#define  CORE_CTRL_PBCLK_ENABLE			BIT(26)
> +#define  CORE_CTRL_RUN_STALL			BIT(23)
> +#define  CORE_CTRL_STATE_VECTOR_SELECT		BIT(19)
> +#define  CORE_CTRL_PIF_GATED			BIT(17)
> +#define  CORE_CTRL_NMI				BIT(0)
> +#define CORE_XTENSA_INT				(0x00000114)
> +#define CORE_CTL_XTENSA_INT			(0x00000118)
> +#define CORE_DEFAULT0				(0x0000013C)
> +#define  CORE_DEFAULT0_QOS_SWAP_0		(0x00 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_1		(0x01 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_2		(0x02 << 28)
> +#define  CORE_DEFAULT0_QOS_SWAP_3		(0x03 << 28)
> +#define  CORE_DEFAULT0_ARUSER_USE_IOMMU		(0x10 << 23)
> +#define  CORE_DEFAULT0_AWUSER_USE_IOMMU		(0x10 << 18)
> +#define CORE_DEFAULT1				(0x00000140)
> +#define  CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU	(0x10 << 0)
> +#define  CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU	(0x10 << 5)
> +#define CORE_XTENSA_ALTRESETVEC			(0x000001F8)
> +
> +struct mtk_vpu_rproc {
> +	struct device *dev;
> +	struct rproc *rproc;
> +
> +	void __iomem *base;
> +	int irq;
> +	struct clk *axi;
> +	struct clk *ipu;
> +	struct clk *jtag;
> +};
> +
> +static u32 vpu_read32(struct mtk_vpu_rproc *vpu_rproc, u32 off)
> +{
> +	return readl(vpu_rproc->base + off);
> +}
> +
> +static void vpu_write32(struct mtk_vpu_rproc *vpu_rproc, u32 off, u32 value)
> +{
> +	writel(value, vpu_rproc->base + off);
> +}
> +
> +static int mtk_vpu_rproc_start(struct rproc *rproc)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +	u32 core_ctrl;
> +
> +	vpu_write32(vpu_rproc, CORE_XTENSA_ALTRESETVEC, rproc->bootaddr);
> +
> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> +	core_ctrl |= CORE_CTRL_PDEBUG_ENABLE | CORE_CTRL_PBCLK_ENABLE |
> +		     CORE_CTRL_STATE_VECTOR_SELECT | CORE_CTRL_RUN_STALL |
> +		     CORE_CTRL_PIF_GATED;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	vpu_write32(vpu_rproc, SW_RST, SW_RST_OCD_HALT_ON_RST |
> +				       SW_RST_IPU_B_RST | SW_RST_IPU_D_RST);
> +	ndelay(27);
> +	vpu_write32(vpu_rproc, SW_RST, 0);
> +
> +	core_ctrl &= ~CORE_CTRL_PIF_GATED;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	vpu_write32(vpu_rproc, CORE_DEFAULT0, CORE_DEFAULT0_AWUSER_USE_IOMMU |
> +					      CORE_DEFAULT0_ARUSER_USE_IOMMU |
> +					      CORE_DEFAULT0_QOS_SWAP_1);
> +	vpu_write32(vpu_rproc, CORE_DEFAULT1,
> +		    CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU |
> +		    CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU);
> +
> +	core_ctrl &= ~CORE_CTRL_RUN_STALL;
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl);
> +
> +	return 0;
> +}
> +
> +static int mtk_vpu_rproc_stop(struct rproc *rproc)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +	u32 core_ctrl;
> +
> +	core_ctrl = vpu_read32(vpu_rproc, CORE_CTRL);
> +	vpu_write32(vpu_rproc, CORE_CTRL, core_ctrl | CORE_CTRL_RUN_STALL);
> +
> +	return 0;
> +}
> +
> +static void mtk_vpu_rproc_kick(struct rproc *rproc, int vqid)
> +{
> +	struct mtk_vpu_rproc *vpu_rproc = rproc->priv;
> +
> +	vpu_write32(vpu_rproc, CORE_CTL_XTENSA_INT, 1 << vqid);
> +}
> +
> +static const struct rproc_ops mtk_vpu_rproc_ops = {
> +	.start		= mtk_vpu_rproc_start,
> +	.stop		= mtk_vpu_rproc_stop,
> +	.kick		= mtk_vpu_rproc_kick,
> +};
> +
> +static irqreturn_t mtk_vpu_rproc_callback(int irq, void *data)
> +{
> +	struct rproc *rproc = (struct rproc *)data;
> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> +
> +	vpu_write32(vpu_rproc, CORE_XTENSA_INT, 1);
> +
> +	return IRQ_WAKE_THREAD;
> +}
> +
> +static irqreturn_t handle_event(int irq, void *data)
> +{
> +	struct rproc *rproc = (struct rproc *)data;
> +
> +	rproc_vq_interrupt(rproc, 0);
> +	rproc_vq_interrupt(rproc, 1);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int mtk_vpu_rproc_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct mtk_vpu_rproc *vpu_rproc;
> +	struct rproc *rproc;
> +	struct resource *res;
> +	int ret;
> +
> +	rproc = rproc_alloc(dev, "apu", &mtk_vpu_rproc_ops, NULL,
> +			    sizeof(*vpu_rproc));
> +	if (!rproc)
> +		return -ENOMEM;
> +
> +	rproc->recovery_disabled = true;
> +	rproc->has_iommu = false;
> +
> +	vpu_rproc = rproc->priv;
> +	vpu_rproc->rproc = rproc;
> +	vpu_rproc->dev = dev;
> +
> +	platform_set_drvdata(pdev, rproc);
> +
> +	rproc->domain = iommu_get_domain_for_dev(dev);
> +	if (!rproc->domain) {
> +		dev_err(dev, "Failed to get the IOMMU domain\n");
> +		ret = -EINVAL;
> +		goto free_rproc;
> +	}
> +
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	vpu_rproc->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(vpu_rproc->base)) {
> +		dev_err(&pdev->dev, "Failed to map mmio\n");
> +		ret = PTR_ERR(vpu_rproc->base);
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->irq = platform_get_irq(pdev, 0);
> +	if (vpu_rproc->irq < 0) {
> +		ret = vpu_rproc->irq;
> +		goto free_rproc;
> +	}
> +
> +	ret = devm_request_threaded_irq(dev, vpu_rproc->irq,
> +					mtk_vpu_rproc_callback, handle_event,
> +					IRQF_SHARED | IRQF_ONESHOT,
> +					"mtk_vpu-remoteproc", rproc);
> +	if (ret) {
> +		dev_err(dev, "devm_request_threaded_irq error: %d\n", ret);
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->ipu = devm_clk_get(dev, "ipu");
> +	if (IS_ERR(vpu_rproc->ipu)) {
> +		dev_err(dev, "Failed to get ipu clock\n");
> +		ret = PTR_ERR(vpu_rproc->ipu);
> +		goto free_rproc;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->ipu);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable ipu clock\n");
> +		goto free_rproc;
> +	}
> +
> +	vpu_rproc->axi = devm_clk_get(dev, "axi");
> +	if (IS_ERR(vpu_rproc->axi)) {
> +		dev_err(dev, "Failed to get axi clock\n");
> +		ret = PTR_ERR(vpu_rproc->axi);
> +		goto clk_disable_ipu;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->axi);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable axi clock\n");
> +		goto clk_disable_ipu;
> +	}
> +
> +	vpu_rproc->jtag = devm_clk_get_optional(dev, "jtag");
> +	if (IS_ERR(vpu_rproc->jtag)) {
> +		dev_err(dev, "Failed to enable jtag clock\n");
> +		ret = PTR_ERR(vpu_rproc->jtag);
> +		goto clk_disable_axi;
> +	}
> +
> +	ret = clk_prepare_enable(vpu_rproc->jtag);
> +	if (ret) {
> +		dev_err(dev, "Failed to enable jtag clock\n");
> +		goto clk_disable_axi;
> +	}

I forgot...  Clocks get enabled when the system is booted or the module loaded,
something that is highly inefficient.  Please use rproc->prepare/unprepare() to
deal with clocks at the appropriate time.

> +
> +	ret = of_reserved_mem_device_init(dev);
> +	if (ret) {
> +		dev_err(dev, "device does not have specific CMA pool\n");
> +		goto clk_disable_jtag;
> +	}
> +
> +	ret = rproc_add(rproc);
> +	if (ret) {
> +		dev_err(dev, "rproc_add failed: %d\n", ret);
> +		goto free_mem;
> +	}
> +
> +	return 0;
> +
> +free_mem:
> +	of_reserved_mem_device_release(dev);
> +clk_disable_jtag:
> +	clk_disable_unprepare(vpu_rproc->jtag);
> +clk_disable_axi:
> +	clk_disable_unprepare(vpu_rproc->axi);
> +clk_disable_ipu:
> +	clk_disable_unprepare(vpu_rproc->ipu);
> +free_rproc:
> +	rproc_free(rproc);
> +
> +	return ret;
> +}
> +
> +static int mtk_vpu_rproc_remove(struct platform_device *pdev)
> +{
> +	struct rproc *rproc = platform_get_drvdata(pdev);
> +	struct mtk_vpu_rproc *vpu_rproc = (struct mtk_vpu_rproc *)rproc->priv;
> +	struct device *dev = &pdev->dev;
> +
> +	disable_irq(vpu_rproc->irq);
> +
> +	rproc_del(rproc);
> +	of_reserved_mem_device_release(dev);
> +	clk_disable_unprepare(vpu_rproc->jtag);
> +	clk_disable_unprepare(vpu_rproc->axi);
> +	clk_disable_unprepare(vpu_rproc->ipu);
> +	rproc_free(rproc);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mtk_vpu_rproc_of_match[] __maybe_unused = {
> +	{ .compatible = "mediatek,mt8183-apu", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_vpu_rproc_of_match);
> +
> +static struct platform_driver mtk_vpu_rproc_driver = {
> +	.probe = mtk_vpu_rproc_probe,
> +	.remove = mtk_vpu_rproc_remove,
> +	.driver = {
> +		.name = "mtk_vpu-rproc",
> +		.of_match_table = of_match_ptr(mtk_vpu_rproc_of_match),
> +	},
> +};
> +module_platform_driver(mtk_vpu_rproc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Alexandre Bailon");
> +MODULE_DESCRIPTION("Mt8183 VPU Remote Processor control driver");
> -- 
> 2.26.2
> 

  parent reply index

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-13 13:29 [PATCH 0/6] Add support of mt8183 APU Alexandre Bailon
2020-07-13 13:29 ` [PATCH 1/6] dt bindings: remoteproc: Add bindings for MT8183 APU Alexandre Bailon
2020-07-14 17:19   ` Rob Herring
2020-07-14 17:22   ` Rob Herring
2020-07-13 13:29 ` [PATCH 2/6] remoteproc: Add a remoteproc driver for the MT8183's APU Alexandre Bailon
2020-07-20 22:17   ` Mathieu Poirier
2020-08-06 13:25     ` Alexandre Bailon
2020-07-20 22:19   ` Mathieu Poirier [this message]
2020-07-13 13:29 ` [PATCH 3/6] remoteproc: mtk_vpu_rproc: Add support of JTAG Alexandre Bailon
2020-07-21 19:52   ` Mathieu Poirier
2020-08-06 13:49     ` Alexandre Bailon
2020-07-13 13:29 ` [PATCH 4/6] remoteproc: mtk_vpu_rproc: Don't try to load empty PT_LOAD segment Alexandre Bailon
2020-07-21 20:21   ` Mathieu Poirier
2020-07-13 13:29 ` [PATCH 5/6] remoteproc: mtk_apu: Don't try to use the APU local RAM Alexandre Bailon
2020-07-21 20:43   ` Mathieu Poirier
2020-07-13 13:29 ` [PATCH 6/6] ARM64: mt8183: Add support of APU to mt8183 Alexandre Bailon
2020-07-17 21:02   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200720221958.GE1113627@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=abailon@baylibre.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git