Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: agross@kernel.org, linux-arm-msm@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	evgreen@chromium.org, ohad@wizery.com
Subject: Re: [PATCH v2 2/2] remoteproc: qcom_q6v5_mss: Add MBA log extraction support
Date: Tue, 21 Jul 2020 21:23:39 -0700
Message-ID: <20200722042339.GO2922385@builder.lan> (raw)
In-Reply-To: <20200721112935.25716-3-sibis@codeaurora.org>

On Tue 21 Jul 04:29 PDT 2020, Sibi Sankar wrote:

> On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
> at the beginning of the MBA region. Add support to extract the logs
> which will be useful to debug mba boot/authentication issues.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>


Afaict this is completely independent from the other patch in the
series, so I applied this.

Regards,
Bjorn

> ---
> 
> V2:
>  * Don't dump logs in mba_reclaim path [Bjorn]
>  * Move has_mba_logs check to q6v5_dump_mba_logs [Bjorn]
>  * SDM845 mss was incorrectly marked to support mba logs
> 
>  drivers/remoteproc/qcom_q6v5_mss.c | 38 +++++++++++++++++++++++++++++-
>  1 file changed, 37 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 49cd16e050533..945ca2652e7d6 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -9,6 +9,7 @@
>  
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/devcoredump.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
> @@ -37,6 +38,8 @@
>  
>  #define MPSS_CRASH_REASON_SMEM		421
>  
> +#define MBA_LOG_SIZE			SZ_4K
> +
>  /* RMB Status Register Values */
>  #define RMB_PBL_SUCCESS			0x1
>  
> @@ -141,6 +144,7 @@ struct rproc_hexagon_res {
>  	int version;
>  	bool need_mem_protection;
>  	bool has_alt_reset;
> +	bool has_mba_logs;
>  	bool has_spare_reg;
>  };
>  
> @@ -202,6 +206,7 @@ struct q6v5 {
>  	struct qcom_sysmon *sysmon;
>  	bool need_mem_protection;
>  	bool has_alt_reset;
> +	bool has_mba_logs;
>  	bool has_spare_reg;
>  	int mpss_perm;
>  	int mba_perm;
> @@ -521,6 +526,26 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
>  	return val;
>  }
>  
> +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
> +{
> +	struct rproc *rproc = qproc->rproc;
> +	void *data;
> +
> +	if (!qproc->has_mba_logs)
> +		return;
> +
> +	if (q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false, qproc->mba_phys,
> +				    qproc->mba_size))
> +		return;
> +
> +	data = vmalloc(MBA_LOG_SIZE);
> +	if (!data)
> +		return;
> +
> +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
> +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
> +}
> +
>  static int q6v5proc_reset(struct q6v5 *qproc)
>  {
>  	u32 val;
> @@ -839,6 +864,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  {
>  	int ret;
>  	int xfermemop_ret;
> +	bool mba_load_err = false;
>  
>  	qcom_q6v5_prepare(&qproc->q6v5);
>  
> @@ -932,7 +958,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> -
> +	mba_load_err = true;
>  reclaim_mba:
>  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
>  						false, qproc->mba_phys,
> @@ -940,6 +966,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	if (xfermemop_ret) {
>  		dev_err(qproc->dev,
>  			"Failed to reclaim mba buffer, system may become unstable\n");
> +	} else if (mba_load_err) {
> +		q6v5_dump_mba_logs(qproc);
>  	}
>  
>  disable_active_clks:
> @@ -1298,6 +1326,7 @@ static int q6v5_start(struct rproc *rproc)
>  
>  reclaim_mpss:
>  	q6v5_mba_reclaim(qproc);
> +	q6v5_dump_mba_logs(qproc);
>  
>  	return ret;
>  }
> @@ -1717,6 +1746,7 @@ static int q6v5_probe(struct platform_device *pdev)
>  
>  	qproc->version = desc->version;
>  	qproc->need_mem_protection = desc->need_mem_protection;
> +	qproc->has_mba_logs = desc->has_mba_logs;
>  
>  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
>  			     qcom_msa_handover);
> @@ -1808,6 +1838,7 @@ static const struct rproc_hexagon_res sc7180_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = true,
>  	.has_spare_reg = true,
>  	.version = MSS_SC7180,
>  };
> @@ -1843,6 +1874,7 @@ static const struct rproc_hexagon_res sdm845_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = true,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_SDM845,
>  };
> @@ -1870,6 +1902,7 @@ static const struct rproc_hexagon_res msm8998_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8998,
>  };
> @@ -1900,6 +1933,7 @@ static const struct rproc_hexagon_res msm8996_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8996,
>  };
> @@ -1933,6 +1967,7 @@ static const struct rproc_hexagon_res msm8916_mss = {
>  	},
>  	.need_mem_protection = false,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8916,
>  };
> @@ -1974,6 +2009,7 @@ static const struct rproc_hexagon_res msm8974_mss = {
>  	},
>  	.need_mem_protection = false,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8974,
>  };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

      reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21 11:29 [PATCH v2 0/2] Add modem debug features Sibi Sankar
2020-07-21 11:29 ` [PATCH v2 1/2] remoteproc: qcom_q6v5_mss: Add modem debug policy support Sibi Sankar
2020-07-22  3:54   ` Bjorn Andersson
2020-07-22  4:18     ` Sibi Sankar
2020-07-21 11:29 ` [PATCH v2 2/2] remoteproc: qcom_q6v5_mss: Add MBA log extraction support Sibi Sankar
2020-07-22  4:23   ` Bjorn Andersson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200722042339.GO2922385@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git