Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v6 0/5] Provide basic driver to control Arm R5  co-processor found on
@ 2020-07-15 15:33 Ben Levinsky
  2020-07-15 15:33 ` [PATCH v6 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
                   ` (4 more replies)
  0 siblings, 5 replies; 10+ messages in thread
From: Ben Levinsky @ 2020-07-15 15:33 UTC (permalink / raw)
  To: ohad, bjorn.andersson, michals, JOLLYS, RAJANV, robh+dt, mark.rutland
  Cc: linux-remoteproc, linux-arm-kernell, devicetree, linux-kernel,
	jliang, stefanos

Currently it is able to start, stop and load elf on to the
processor.

The driver was tested on Xilinx ZynqMP and Versal.

v2:
- remove domain struct as per review from Mathieu
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around
  function pointer in xilinx eemi ops struct
- update zynqmp_r5 yaml parsing to not raise warnings for extra
  information in children of R5 node. The warning "node has a unit
  name, but no reg or ranges property" will still be raised though 
  as this particular node is needed to describe the
  '#address-cells' and '#size-cells' information.
v4:
- add default values for enums
- fix formatting as per checkpatch.pl --strict. Note that 1 warning and 1 check
  are still raised as each is due to fixing the warning results in that
particular line going over 80 characters.
- remove warning '/example-0/rpu@ff9a0000/r5@0: 
  node has a unit name, but no reg or ranges property'
  by adding reg to r5 node.
v5:
- update device tree sample and yaml parsing to not raise any warnings
- description for memory-region in yaml parsing
- compatible string in yaml parsing for TCM
- parse_fw change from use of rproc_of_resm_mem_entry_init to rproc_mem_entry_init and use of alloc/release
- var's of type zynqmp_r5_pdata all have same local variable name
- use dev_dbg instead of dev_info
v6:
- adding memory carveouts is handled much more similarly. All mem carveouts are
  now described in reserved memory as needed. That is, TCM nodes are not
  coupled to remoteproc anymore. This is reflected in the remoteproc R5 driver
  and the device tree binding.
- remove mailbox from device tree binding as it is not necessary for elf
  loading



Ben Levinsky (5):
  firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
    configuration.
  firmware: xilinx: Add shutdown/wakeup APIs
  firmware: xilinx: Add RPU configuration APIs
  dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc
    bindings
  remoteproc: Add initial zynqmp R5 remoteproc driver

 .../xilinx,zynqmp-r5-remoteproc.yaml          |  73 ++
 drivers/firmware/xilinx/zynqmp.c              | 134 +++
 drivers/remoteproc/Kconfig                    |  10 +
 drivers/remoteproc/Makefile                   |   1 +
 drivers/remoteproc/zynqmp_r5_remoteproc.c     | 911 ++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h          |  75 ++
 6 files changed, 1204 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
 create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c

-- 
2.17.1


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-15 15:33 [PATCH v6 0/5] Provide basic driver to control Arm R5 co-processor found on Ben Levinsky
2020-07-15 15:33 ` [PATCH v6 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
2020-07-15 15:33 ` [PATCH v6 2/5] firmware: xilinx: Add shutdown/wakeup APIs Ben Levinsky
2020-07-15 15:33 ` [PATCH v6 3/5] firmware: xilinx: Add RPU configuration APIs Ben Levinsky
2020-07-15 15:33 ` [PATCH v6 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky
2020-07-15 15:33 ` [PATCH v6 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky
2020-07-27 22:59   ` Mathieu Poirier
2020-07-28  5:09     ` Michal Simek
2020-07-28 21:00   ` Mathieu Poirier
2020-07-31 23:03     ` Stefano Stabellini

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git