Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Siddharth Gupta <sidgup@codeaurora.org>
Cc: agross@kernel.org, ohad@wizery.com, corbet@lwn.net,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, tsoni@codeaurora.org,
	psodagud@codeaurora.org, rishabhb@codeaurora.org,
	linux-doc@vger.kernel.org
Subject: Re: [PATCH v5 1/2] remoteproc: Add remoteproc character device interface
Date: Wed, 29 Jul 2020 12:16:17 -0700
Message-ID: <20200729191617.GE229995@builder.lan> (raw)
In-Reply-To: <1596044401-22083-2-git-send-email-sidgup@codeaurora.org>

On Wed 29 Jul 10:40 PDT 2020, Siddharth Gupta wrote:

> Add the character device interface into remoteproc framework.
> This interface can be used in order to boot/shutdown remote
> subsystems and provides a basic ioctl based interface to implement
> supplementary functionality. An ioctl call is implemented to enable
> the shutdown on release feature which will allow remote processors to
> be shutdown when the controlling userpsace application crashes or hangs.

s/userspace/userspace/

But no need to resend just because of that.

> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  Documentation/userspace-api/ioctl/ioctl-number.rst |   1 +
>  drivers/remoteproc/Kconfig                         |   9 ++
>  drivers/remoteproc/Makefile                        |   1 +
>  drivers/remoteproc/remoteproc_cdev.c               | 124 +++++++++++++++++++++
>  drivers/remoteproc/remoteproc_internal.h           |  28 +++++
>  include/linux/remoteproc.h                         |   5 +
>  include/uapi/linux/remoteproc_cdev.h               |  37 ++++++
>  7 files changed, 205 insertions(+)
>  create mode 100644 drivers/remoteproc/remoteproc_cdev.c
>  create mode 100644 include/uapi/linux/remoteproc_cdev.h
> 
> diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
> index 59472cd..2a19883 100644
> --- a/Documentation/userspace-api/ioctl/ioctl-number.rst
> +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
> @@ -339,6 +339,7 @@ Code  Seq#    Include File                                           Comments
>  0xB4  00-0F  linux/gpio.h                                            <mailto:linux-gpio@vger.kernel.org>
>  0xB5  00-0F  uapi/linux/rpmsg.h                                      <mailto:linux-remoteproc@vger.kernel.org>
>  0xB6  all    linux/fpga-dfl.h
> +0xB7  all    uapi/linux/remoteproc_cdev.h                            <mailto:linux-remoteproc@vger.kernel.org>
>  0xC0  00-0F  linux/usb/iowarrior.h
>  0xCA  00-0F  uapi/misc/cxl.h
>  0xCA  10-2F  uapi/misc/ocxl.h
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 48315dc..c6659dfe 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -14,6 +14,15 @@ config REMOTEPROC
>  
>  if REMOTEPROC
>  
> +config REMOTEPROC_CDEV
> +	bool "Remoteproc character device interface"
> +	help
> +	  Say y here to have a character device interface for the remoteproc
> +	  framework. Userspace can boot/shutdown remote processors through
> +	  this interface.
> +
> +	  It's safe to say N if you don't want to use this interface.
> +
>  config IMX_REMOTEPROC
>  	tristate "IMX6/7 remoteproc support"
>  	depends on ARCH_MXC
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 4d4307d..3dfa28e 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -10,6 +10,7 @@ remoteproc-y				+= remoteproc_debugfs.o
>  remoteproc-y				+= remoteproc_sysfs.o
>  remoteproc-y				+= remoteproc_virtio.o
>  remoteproc-y				+= remoteproc_elf_loader.o
> +obj-$(CONFIG_REMOTEPROC_CDEV)		+= remoteproc_cdev.o
>  obj-$(CONFIG_IMX_REMOTEPROC)		+= imx_rproc.o
>  obj-$(CONFIG_INGENIC_VPU_RPROC)		+= ingenic_rproc.o
>  obj-$(CONFIG_MTK_SCP)			+= mtk_scp.o mtk_scp_ipi.o
> diff --git a/drivers/remoteproc/remoteproc_cdev.c b/drivers/remoteproc/remoteproc_cdev.c
> new file mode 100644
> index 0000000..a7ac11c
> --- /dev/null
> +++ b/drivers/remoteproc/remoteproc_cdev.c
> @@ -0,0 +1,124 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Character device interface driver for Remoteproc framework.
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/cdev.h>
> +#include <linux/compat.h>
> +#include <linux/fs.h>
> +#include <linux/module.h>
> +#include <linux/remoteproc.h>
> +#include <linux/uaccess.h>
> +#include <uapi/linux/remoteproc_cdev.h>
> +
> +#include "remoteproc_internal.h"
> +
> +#define NUM_RPROC_DEVICES	64
> +static dev_t rproc_major;
> +
> +static ssize_t rproc_cdev_write(struct file *filp, const char __user *buf, size_t len, loff_t *pos)
> +{
> +	struct rproc *rproc = container_of(filp->f_inode->i_cdev, struct rproc, cdev);
> +	int ret = 0;
> +	char cmd[10];
> +
> +	if (!len || len > sizeof(cmd))
> +		return -EINVAL;
> +
> +	ret = copy_from_user(cmd, buf, len);
> +	if (ret)
> +		return -EFAULT;
> +
> +	if (!strncmp(cmd, "start", len)) {
> +		if (rproc->state == RPROC_RUNNING)
> +			return -EBUSY;
> +
> +		ret = rproc_boot(rproc);
> +	} else if (!strncmp(cmd, "stop", len)) {
> +		if (rproc->state != RPROC_RUNNING)
> +			return -EINVAL;
> +
> +		rproc_shutdown(rproc);
> +	} else {
> +		dev_err(&rproc->dev, "Unrecognized option\n");
> +		ret = -EINVAL;
> +	}
> +
> +	return ret ? ret : len;
> +}
> +
> +static long rproc_device_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
> +{
> +	struct rproc *rproc = container_of(filp->f_inode->i_cdev, struct rproc, cdev);
> +	void __user *argp = (void __user *)arg;
> +	int32_t param;
> +
> +	switch (ioctl) {
> +	case RPROC_SET_SHUTDOWN_ON_RELEASE:
> +		if (copy_from_user(&param, argp, sizeof(int32_t)))
> +			return -EFAULT;
> +
> +		rproc->cdev_put_on_release = !!param;
> +		break;
> +	case RPROC_GET_SHUTDOWN_ON_RELEASE:
> +		param = (int32_t)rproc->cdev_put_on_release;
> +		if (copy_to_user(argp, &param, sizeof(int32_t)))
> +			return -EFAULT;
> +
> +		break;
> +	default:
> +		dev_err(&rproc->dev, "Unsupported ioctl\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rproc_cdev_release(struct inode *inode, struct file *filp)
> +{
> +	struct rproc *rproc = container_of(inode->i_cdev, struct rproc, cdev);
> +
> +	if (rproc->cdev_put_on_release && rproc->state == RPROC_RUNNING)
> +		rproc_shutdown(rproc);
> +
> +	return 0;
> +}
> +
> +static const struct file_operations rproc_fops = {
> +	.write = rproc_cdev_write,
> +	.unlocked_ioctl = rproc_device_ioctl,
> +	.compat_ioctl = compat_ptr_ioctl,
> +	.release = rproc_cdev_release,
> +};
> +
> +int rproc_char_device_add(struct rproc *rproc)
> +{
> +	int ret;
> +
> +	cdev_init(&rproc->cdev, &rproc_fops);
> +	rproc->cdev.owner = THIS_MODULE;
> +
> +	rproc->dev.devt = MKDEV(MAJOR(rproc_major), rproc->index);
> +	cdev_set_parent(&rproc->cdev, &rproc->dev.kobj);
> +	ret = cdev_add(&rproc->cdev, rproc->dev.devt, 1);
> +	if (ret < 0)
> +		dev_err(&rproc->dev, "Failed to add char dev for %s\n", rproc->name);
> +
> +	return ret;
> +}
> +
> +void rproc_char_device_remove(struct rproc *rproc)
> +{
> +	__unregister_chrdev(MAJOR(rproc->dev.devt), rproc->index, 1, "remoteproc");
> +}
> +
> +void __init rproc_init_cdev(void)
> +{
> +	int ret;
> +
> +	ret = alloc_chrdev_region(&rproc_major, 0, NUM_RPROC_DEVICES, "remoteproc");
> +	if (ret < 0)
> +		pr_err("Failed to alloc rproc_cdev region, err %d\n", ret);
> +}
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index cd4176b..c340028 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -53,6 +53,34 @@ void rproc_exit_sysfs(void);
>  void rproc_coredump_cleanup(struct rproc *rproc);
>  void rproc_coredump(struct rproc *rproc);
>  
> +#ifdef CONFIG_REMOTEPROC_CDEV
> +void rproc_init_cdev(void);
> +void rproc_exit_cdev(void);
> +int rproc_char_device_add(struct rproc *rproc);
> +void rproc_char_device_remove(struct rproc *rproc);
> +#else
> +static inline void rproc_init_cdev(void)
> +{
> +}
> +
> +static inline void rproc_exit_cdev(void)
> +{
> +}
> +
> +/*
> + * The character device interface is an optional feature, if it is not enabled
> + * the function should not return an error.
> + */
> +static inline int rproc_char_device_add(struct rproc *rproc)
> +{
> +	return 0;
> +}
> +
> +static inline void  rproc_char_device_remove(struct rproc *rproc)
> +{
> +}
> +#endif
> +
>  void rproc_free_vring(struct rproc_vring *rvring);
>  int rproc_alloc_vring(struct rproc_vdev *rvdev, int i);
>  
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index 0e8d2ff..2fa68bf 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -38,6 +38,7 @@
>  #include <linux/types.h>
>  #include <linux/mutex.h>
>  #include <linux/virtio.h>
> +#include <linux/cdev.h>
>  #include <linux/completion.h>
>  #include <linux/idr.h>
>  #include <linux/of.h>
> @@ -509,6 +510,8 @@ struct rproc_dump_segment {
>   * @autonomous: true if an external entity has booted the remote processor
>   * @dump_segments: list of segments in the firmware
>   * @nb_vdev: number of vdev currently handled by rproc
> + * @char_dev: character device of the rproc
> + * @cdev_put_on_release: flag to indicate if remoteproc should be shutdown on @char_dev release
>   */
>  struct rproc {
>  	struct list_head node;
> @@ -546,6 +549,8 @@ struct rproc {
>  	int nb_vdev;
>  	u8 elf_class;
>  	u16 elf_machine;
> +	struct cdev cdev;
> +	bool cdev_put_on_release;
>  };
>  
>  /**
> diff --git a/include/uapi/linux/remoteproc_cdev.h b/include/uapi/linux/remoteproc_cdev.h
> new file mode 100644
> index 0000000..c43768e
> --- /dev/null
> +++ b/include/uapi/linux/remoteproc_cdev.h
> @@ -0,0 +1,37 @@
> +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
> +/*
> + * IOCTLs for Remoteproc's character device interface.
> + *
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _UAPI_REMOTEPROC_CDEV_H_
> +#define _UAPI_REMOTEPROC_CDEV_H_
> +
> +#include <linux/ioctl.h>
> +#include <linux/types.h>
> +
> +#define RPROC_MAGIC	0xB7
> +
> +/*
> + * The RPROC_SET_SHUTDOWN_ON_RELEASE ioctl allows to enable/disable the shutdown of a remote
> + * processor automatically when the controlling userpsace closes the char device interface.
> + *
> + * input parameter: integer
> + *   0		: disable automatic shutdown
> + *   other	: enable automatic shutdown
> + */
> +#define RPROC_SET_SHUTDOWN_ON_RELEASE _IOW(RPROC_MAGIC, 1, __s32)
> +
> +/*
> + * The RPROC_GET_SHUTDOWN_ON_RELEASE ioctl gets information about whether the automatic shutdown of
> + * a remote processor is enabled or disabled when the controlling userspace closes the char device
> + * interface.
> + *
> + * output parameter: integer
> + *   0		: automatic shutdown disable
> + *   other	: automatic shutdown enable
> + */
> +#define RPROC_GET_SHUTDOWN_ON_RELEASE _IOR(RPROC_MAGIC, 2, __s32)
> +
> +#endif
> -- 
> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29 17:39 [PATCH v5 0/2] Add character device interface to remoteproc Siddharth Gupta
2020-07-29 17:40 ` [PATCH v5 1/2] remoteproc: Add remoteproc character device interface Siddharth Gupta
2020-07-29 19:16   ` Bjorn Andersson [this message]
2020-07-30 17:06   ` Mathieu Poirier
2020-07-29 17:40 ` [PATCH v5 2/2] remoteproc: core: Register the " Siddharth Gupta
2020-07-29 19:16   ` Bjorn Andersson
2020-07-30 17:07   ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200729191617.GE229995@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=corbet@lwn.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=psodagud@codeaurora.org \
    --cc=rishabhb@codeaurora.org \
    --cc=sidgup@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git