Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Ben Levinsky <ben.levinsky@xilinx.com>
To: stefano.stabellini@xilinx.com, michal.simek@xilinx.com
Cc: mathieu.poirier@linaro.org, robh+dt@kernel.org,
	linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v7 2/5] firmware: xilinx: Add shutdown/wakeup APIs
Date: Fri, 31 Jul 2020 09:47:51 -0700
Message-ID: <20200731164754.20505-3-ben.levinsky@xilinx.com> (raw)
In-Reply-To: <20200731164754.20505-1-ben.levinsky@xilinx.com>

Add shutdown/wakeup a resource eemi operations to shutdown
or bringup a resource.

Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com>
---
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around
  function pointer in xilinx eemi ops struct
- fix formatting
v4:
- add default values for enum
---
 drivers/firmware/xilinx/zynqmp.c     | 35 ++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 22 +++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 8d1ff2454e2e..f1a0bd35deeb 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -846,6 +846,41 @@ int zynqmp_pm_release_node(const u32 node)
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
 
+/**
+ * zynqmp_pm_force_powerdown - PM call to request for another PU or subsystem to
+ *             be powered down forcefully
+ * @target:    Node ID of the targeted PU or subsystem
+ * @ack:   Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_powerdown(const u32 target,
+			      const enum zynqmp_pm_request_ack ack)
+{
+	return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, target, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_powerdown);
+
+/**
+ * zynqmp_pm_request_wakeup - PM call to wake up selected master or subsystem
+ * @node:  Node ID of the master or subsystem
+ * @set_addr:  Specifies whether the address argument is relevant
+ * @address:   Address from which to resume when woken up
+ * @ack:   Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wakeup(const u32 node,
+			     const bool set_addr,
+			     const u64 address,
+			     const enum zynqmp_pm_request_ack ack)
+{
+	/* set_addr flag is encoded into 1st bit of address */
+	return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+				   address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wakeup);
+
 /**
  * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
  * @node:		Node ID of the slave
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index bb347dfe4ba4..4d83a7d69c4c 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -64,6 +64,8 @@
 
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
+	PM_FORCE_POWERDOWN = 8,
+	PM_REQUEST_WAKEUP = 10,
 	PM_SYSTEM_SHUTDOWN = 12,
 	PM_REQUEST_NODE = 13,
 	PM_RELEASE_NODE,
@@ -376,6 +378,12 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
 int zynqmp_pm_read_pggs(u32 index, u32 *value);
 int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
 int zynqmp_pm_set_boot_health_status(u32 value);
+int zynqmp_pm_force_powerdown(const u32 target,
+			      const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wakeup(const u32 node,
+			     const bool set_addr,
+			     const u64 address,
+			     const enum zynqmp_pm_request_ack ack);
 #else
 static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
 {
@@ -526,6 +534,20 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_force_powerdown(const u32 target,
+				    const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_request_wakeup(const u32 node,
+					   const bool set_addr,
+					   const u64 address,
+				   const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */
-- 
2.17.1


  parent reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-31 16:47 [PATCH v7 0/5] Provide basic driver to control Arm R5 co-processor found on Ben Levinsky
2020-07-31 16:47 ` [PATCH v7 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky
2020-07-31 16:47 ` Ben Levinsky [this message]
2020-07-31 16:47 ` [PATCH v7 3/5] firmware: xilinx: Add RPU configuration APIs Ben Levinsky
2020-07-31 16:47 ` [PATCH v7 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky
2020-07-31 16:47 ` [PATCH v7 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200731164754.20505-3-ben.levinsky@xilinx.com \
    --to=ben.levinsky@xilinx.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=stefano.stabellini@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git