Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Peng Fan <peng.fan@nxp.com>
Cc: bjorn.andersson@linaro.org, o.rempel@pengutronix.de,
	robh+dt@kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook
Date: Tue, 11 Aug 2020 15:56:25 -0600
Message-ID: <20200811215625.GC3370567@xps15> (raw)
In-Reply-To: <20200724080813.24884-8-peng.fan@nxp.com>

On Fri, Jul 24, 2020 at 04:08:10PM +0800, Peng Fan wrote:
> The hook is used to parse memory-regions and load resource table
> from the address the remote processor published.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 99 +++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 98 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index c23726091228..43000a992455 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -11,6 +11,7 @@
>  #include <linux/mfd/syscon.h>
>  #include <linux/module.h>
>  #include <linux/of_address.h>
> +#include <linux/of_reserved_mem.h>
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
> @@ -89,6 +90,7 @@ struct imx_rproc {
>  	const struct imx_rproc_dcfg	*dcfg;
>  	struct imx_rproc_mem		mem[IMX7D_RPROC_MEM_MAX];
>  	struct clk			*clk;
> +	void				*rsc_va;

Where is this used?

>  };
>  
>  static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
> @@ -251,6 +253,101 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
>  	return va;
>  }
>  
> +static int imx_rproc_mem_alloc(struct rproc *rproc,
> +			       struct rproc_mem_entry *mem)
> +{
> +	struct device *dev = rproc->dev.parent;
> +	void *va;
> +
> +	dev_dbg(dev, "map memory: %p+%zx\n", &mem->dma, mem->len);
> +	va = ioremap_wc(mem->dma, mem->len);
> +	if (IS_ERR_OR_NULL(va)) {
> +		dev_err(dev, "Unable to map memory region: %p+%zx\n",
> +			&mem->dma, mem->len);
> +		return -ENOMEM;
> +	}
> +
> +	/* Update memory entry va */
> +	mem->va = va;
> +
> +	return 0;
> +}
> +
> +static int imx_rproc_mem_release(struct rproc *rproc,
> +				 struct rproc_mem_entry *mem)
> +{
> +	dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
> +	iounmap(mem->va);
> +
> +	return 0;
> +}
> +
> +static int imx_rproc_parse_memory_regions(struct rproc *rproc)
> +{
> +	struct imx_rproc *priv = rproc->priv;
> +	struct device_node *np = priv->dev->of_node;
> +	struct of_phandle_iterator it;
> +	struct rproc_mem_entry *mem;
> +	struct reserved_mem *rmem;
> +	int index = 0;
> +	u32 da;
> +
> +	/* Register associated reserved memory regions */
> +	of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> +	while (of_phandle_iterator_next(&it) == 0) {
> +		rmem = of_reserved_mem_lookup(it.node);
> +		if (!rmem) {
> +			dev_err(priv->dev, "unable to acquire memory-region\n");
> +			return -EINVAL;
> +		}
> +
> +		/* No need to translate pa to da, i.MX use same map */
> +		da = rmem->base;
> +
> +		if (strcmp(it.node->name, "vdev0buffer")) {

Are you sure you will _always_ have a single vdev?  From the example you have
given to Oleksij it doesn't seem to be the case...

> +			/* Register memory region */
> +			mem = rproc_mem_entry_init(priv->dev, NULL,
> +						   (dma_addr_t)rmem->base,
> +						   rmem->size, da,
> +						   imx_rproc_mem_alloc,
> +						   imx_rproc_mem_release,
> +						   it.node->name);
> +
> +			if (mem)
> +				rproc_coredump_add_segment(rproc, da,
> +							   rmem->size);
> +		} else {
> +			/* Register reserved memory for vdev buffer alloc */
> +			mem = rproc_of_resm_mem_entry_init(priv->dev, index,
> +							   rmem->size,
> +							   rmem->base,
> +							   it.node->name);
> +		}
> +
> +		if (!mem)
> +			return -ENOMEM;
> +
> +		rproc_add_carveout(rproc, mem);
> +		index++;
> +	}
> +
> +	return  0;
> +}
> +
> +static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> +{
> +	int ret = imx_rproc_parse_memory_regions(rproc);
> +
> +	if (ret)
> +		return ret;
> +
> +	ret = rproc_elf_load_rsc_table(rproc, fw);
> +	if (ret)
> +		dev_info(&rproc->dev, "No resource table in elf\n");
> +
> +	return 0;
> +}
> +
>  static int imx_rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
>  {
>  	struct device *dev = &rproc->dev;
> @@ -323,7 +420,7 @@ static const struct rproc_ops imx_rproc_ops = {
>  	.stop		= imx_rproc_stop,
>  	.da_to_va       = imx_rproc_da_to_va,
>  	.load		= imx_rproc_elf_load_segments,
> -	.parse_fw	= rproc_elf_load_rsc_table,
> +	.parse_fw	= imx_rproc_parse_fw,
>  	.find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
>  	.sanity_check	= rproc_elf_sanity_check,
>  	.get_boot_addr	= rproc_elf_get_boot_addr,
> -- 
> 2.16.4
> 

  reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24  8:08 [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and early boot Peng Fan
2020-07-24  8:08 ` [PATCH 01/10] dt-bindings: remoteproc: imx_rproc: add i.MX8MQ/M Peng Fan
2020-07-31 20:14   ` Rob Herring
2020-07-24  8:08 ` [PATCH 02/10] remoteproc: imx_rproc: correct err message Peng Fan
2020-08-11 19:56   ` Mathieu Poirier
2020-07-24  8:08 ` [PATCH 03/10] remoteproc: imx: use devm_ioremap Peng Fan
2020-07-27  6:23   ` Oleksij Rempel
2020-07-27  6:28     ` Peng Fan
2020-07-27  6:41       ` Oleksij Rempel
2020-07-27  6:51         ` Peng Fan
2020-07-27  7:37           ` Oleksij Rempel
2020-07-27  8:11             ` Peng Fan
2020-07-28  7:20               ` Oleksij Rempel
2020-07-24  8:08 ` [PATCH 04/10] remoteproc: imx_rproc: make syscon optional Peng Fan
2020-08-11 22:40   ` Mathieu Poirier
2020-08-18 21:43   ` Mathieu Poirier
2020-08-19  0:51     ` Peng Fan
2020-08-19 19:45       ` Mathieu Poirier
2020-08-20  2:04         ` Peng Fan
2020-08-20 19:27           ` Mathieu Poirier
2020-07-24  8:08 ` [PATCH 05/10] remoteproc: imx_rproc: make clk optional Peng Fan
2020-07-24  8:08 ` [PATCH 06/10] remoteproc: imx_rproc: add load hook Peng Fan
2020-07-27  5:20   ` Oleksij Rempel
2020-08-11 21:40   ` Mathieu Poirier
2020-07-24  8:08 ` [PATCH 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook Peng Fan
2020-08-11 21:56   ` Mathieu Poirier [this message]
2020-07-24  8:08 ` [PATCH 08/10] remoteproc: imx_rproc: support i.MX8MQ/M Peng Fan
2020-07-24  8:08 ` [PATCH 09/10] remoteproc: imx_proc: enable virtio/mailbox Peng Fan
2020-07-24  8:08 ` [PATCH 10/10] remoteproc: imx_rproc: support coproc booting before Linux Peng Fan
2020-08-11 22:36   ` Mathieu Poirier
2020-07-27  6:38 ` [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and early boot Oleksij Rempel
2020-07-27  6:44   ` Peng Fan
2020-07-27  7:54     ` Oleksij Rempel
2020-07-27  9:18       ` Peng Fan
2020-07-28  7:26         ` Oleksij Rempel
2020-07-28  7:50           ` Peng Fan
2020-07-28  7:55             ` Oleksij Rempel
2020-07-28  9:36               ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200811215625.GC3370567@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git