Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	bjorn.andersson@linaro.org, tsoni@codeaurora.org,
	psodagud@codeaurora.org, sidgup@codeaurora.org
Subject: Re: [PATCH 1/2] remoteproc: Move coredump entry from debugfs to sysfs.
Date: Tue, 18 Aug 2020 14:02:52 -0600
Message-ID: <20200818200252.GA3804229@xps15> (raw)
In-Reply-To: <1595977697-15389-2-git-send-email-rishabhb@codeaurora.org>

On Tue, Jul 28, 2020 at 04:08:16PM -0700, Rishabh Bhatnagar wrote:
> Expose coredump configuration from sysfs instead of debugfs.
> In some operating systems access to debugfs might be limited.
> This restricts user from selecting the coredump configuration
> at all, hence move this interface to sysfs.
> 
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  Documentation/ABI/testing/sysfs-class-remoteproc | 40 +++++++++++

This needs to be a patch on its own.

>  drivers/remoteproc/remoteproc_debugfs.c          | 90 ------------------------
>  drivers/remoteproc/remoteproc_sysfs.c            | 64 +++++++++++++++++
>  3 files changed, 104 insertions(+), 90 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc
> index 36094fb..812582a 100644
> --- a/Documentation/ABI/testing/sysfs-class-remoteproc
> +++ b/Documentation/ABI/testing/sysfs-class-remoteproc
> @@ -58,3 +58,43 @@ Description:	Remote processor name
>  		Reports the name of the remote processor. This can be used by
>  		userspace in exactly identifying a remote processor and ease
>  		up the usage in modifying the 'firmware' or 'state' files.
> +
> +What:		/sys/class/remoteproc/.../coredump
> +Date:		July 2020
> +Contact:	Rishabh Bhatnagar <rishabhb@codeaurora.org>

This should be Bjorn and Ohad

> +Description:	Remote processor coredump configuration
> +
> +		Reports the coredump configuration of the remote processor,
> +		which will be one of:
> +
> +		"default"
> +		"inline"
> +		"disabled"
> +
> +		"default" means when the remote processor's coredump is
> +		collected it will be copied to a separate buffer and that
> +		buffer is exposed to userspace.
> +
> +		"inline" means when the remote processor's coredump is
> +		collected userspace will directly read from the remote
> +		processor's device memory. Extra buffer will not be used to
> +		copy the dump. Also recovery process will not proceed until
> +		all data is read by usersapce.
> +
> +		"disabled" means no dump will be collected.

Everything below should be removed.

> +
> +		Writing this file controls the coredump configuration of the
> +		remote processor. The following configurations can be written:
> +
> +		"default"
> +		"inline"
> +		"disable"
> +
> +		Writing "default" will change the coredump configuration to
> +		default option.
> +
> +		Writing "inline" will change the coredump configuration to
> +		inline.
> +
> +		Writing "disable" will disable the coredump collection for
> +		that remoteproc.
> diff --git a/drivers/remoteproc/remoteproc_debugfs.c b/drivers/remoteproc/remoteproc_debugfs.c
> index 2e3b3e2..732770e 100644
> --- a/drivers/remoteproc/remoteproc_debugfs.c
> +++ b/drivers/remoteproc/remoteproc_debugfs.c
> @@ -28,94 +28,6 @@
>  static struct dentry *rproc_dbg;
>  
>  /*
> - * A coredump-configuration-to-string lookup table, for exposing a
> - * human readable configuration via debugfs. Always keep in sync with
> - * enum rproc_coredump_mechanism
> - */
> -static const char * const rproc_coredump_str[] = {
> -	[RPROC_COREDUMP_DEFAULT]	= "default",
> -	[RPROC_COREDUMP_INLINE]		= "inline",
> -	[RPROC_COREDUMP_DISABLED]	= "disabled",
> -};
> -
> -/* Expose the current coredump configuration via debugfs */
> -static ssize_t rproc_coredump_read(struct file *filp, char __user *userbuf,
> -				   size_t count, loff_t *ppos)
> -{
> -	struct rproc *rproc = filp->private_data;
> -	char buf[20];
> -	int len;
> -
> -	len = scnprintf(buf, sizeof(buf), "%s\n",
> -			rproc_coredump_str[rproc->dump_conf]);
> -
> -	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
> -}
> -
> -/*
> - * By writing to the 'coredump' debugfs entry, we control the behavior of the
> - * coredump mechanism dynamically. The default value of this entry is "default".
> - *
> - * The 'coredump' debugfs entry supports these commands:
> - *
> - * default:	This is the default coredump mechanism. When the remoteproc
> - *		crashes the entire coredump will be copied to a separate buffer
> - *		and exposed to userspace.
> - *
> - * inline:	The coredump will not be copied to a separate buffer and the
> - *		recovery process will have to wait until data is read by
> - *		userspace. But this avoid usage of extra memory.
> - *
> - * disabled:	This will disable coredump. Recovery will proceed without
> - *		collecting any dump.
> - */
> -static ssize_t rproc_coredump_write(struct file *filp,
> -				    const char __user *user_buf, size_t count,
> -				    loff_t *ppos)
> -{
> -	struct rproc *rproc = filp->private_data;
> -	int ret, err = 0;
> -	char buf[20];
> -
> -	if (count > sizeof(buf))
> -		return -EINVAL;
> -
> -	ret = copy_from_user(buf, user_buf, count);
> -	if (ret)
> -		return -EFAULT;
> -
> -	/* remove end of line */
> -	if (buf[count - 1] == '\n')
> -		buf[count - 1] = '\0';
> -
> -	if (rproc->state == RPROC_CRASHED) {
> -		dev_err(&rproc->dev, "can't change coredump configuration\n");
> -		err = -EBUSY;
> -		goto out;
> -	}
> -
> -	if (!strncmp(buf, "disable", count)) {
> -		rproc->dump_conf = RPROC_COREDUMP_DISABLED;
> -	} else if (!strncmp(buf, "inline", count)) {
> -		rproc->dump_conf = RPROC_COREDUMP_INLINE;
> -	} else if (!strncmp(buf, "default", count)) {
> -		rproc->dump_conf = RPROC_COREDUMP_DEFAULT;
> -	} else {
> -		dev_err(&rproc->dev, "Invalid coredump configuration\n");
> -		err = -EINVAL;
> -	}
> -out:
> -	return err ? err : count;
> -}
> -
> -static const struct file_operations rproc_coredump_fops = {
> -	.read = rproc_coredump_read,
> -	.write = rproc_coredump_write,
> -	.open = simple_open,
> -	.llseek = generic_file_llseek,
> -};
> -
> -/*
>   * Some remote processors may support dumping trace logs into a shared
>   * memory buffer. We expose this trace buffer using debugfs, so users
>   * can easily tell what's going on remotely.
> @@ -425,8 +337,6 @@ void rproc_create_debug_dir(struct rproc *rproc)
>  			    rproc, &rproc_rsc_table_fops);
>  	debugfs_create_file("carveout_memories", 0400, rproc->dbg_dir,
>  			    rproc, &rproc_carveouts_fops);
> -	debugfs_create_file("coredump", 0600, rproc->dbg_dir,
> -			    rproc, &rproc_coredump_fops);
>  }
>  
>  void __init rproc_init_debugfs(void)
> diff --git a/drivers/remoteproc/remoteproc_sysfs.c b/drivers/remoteproc/remoteproc_sysfs.c
> index eea514c..40949a0 100644
> --- a/drivers/remoteproc/remoteproc_sysfs.c
> +++ b/drivers/remoteproc/remoteproc_sysfs.c
> @@ -10,6 +10,69 @@
>  
>  #define to_rproc(d) container_of(d, struct rproc, dev)
>  
> +/*
> + * A coredump-configuration-to-string lookup table, for exposing a
> + * human readable configuration via sysfs. Always keep in sync with
> + * enum rproc_coredump_mechanism
> + */
> +static const char * const rproc_coredump_str[] = {
> +	[RPROC_COREDUMP_DEFAULT]	= "default",
> +	[RPROC_COREDUMP_INLINE]		= "inline",
> +	[RPROC_COREDUMP_DISABLED]	= "disabled",
> +};
> +
> +/* Expose the current coredump configuration via debugfs */
> +static ssize_t coredump_show(struct device *dev,
> +			     struct device_attribute *attr, char *buf)
> +{
> +	struct rproc *rproc = to_rproc(dev);
> +
> +	return sprintf(buf, "%s\n", rproc_coredump_str[rproc->dump_conf]);
> +}
> +
> +/*
> + * By writing to the 'coredump' sysfs entry, we control the behavior of the
> + * coredump mechanism dynamically. The default value of this entry is "default".
> + *
> + * The 'coredump' sysfs entry supports these commands:
> + *
> + * default:	This is the default coredump mechanism. When the remoteproc
> + *		crashes the entire coredump will be copied to a separate buffer
> + *		and exposed to userspace.
> + *
> + * inline:	The coredump will not be copied to a separate buffer and the
> + *		recovery process will have to wait until data is read by
> + *		userspace. But this avoid usage of extra memory.
> + *
> + * disabled:	This will disable coredump. Recovery will proceed without
> + *		collecting any dump.
> + */
> +static ssize_t coredump_store(struct device *dev,
> +			      struct device_attribute *attr,
> +			      const char *buf, size_t count)
> +{
> +	struct rproc *rproc = to_rproc(dev);
> +
> +	if (rproc->state == RPROC_CRASHED) {
> +		dev_err(&rproc->dev, "can't change coredump configuration\n");
> +		return -EBUSY;
> +	}
> +
> +	if (sysfs_streq(buf, "disable")) {
> +		rproc->dump_conf = RPROC_COREDUMP_DISABLED;
> +	} else if (sysfs_streq(buf, "inline")) {
> +		rproc->dump_conf = RPROC_COREDUMP_INLINE;
> +	} else if (sysfs_streq(buf, "default")) {
> +		rproc->dump_conf = RPROC_COREDUMP_DEFAULT;
> +	} else {
> +		dev_err(&rproc->dev, "Invalid coredump configuration\n");
> +		return -EINVAL;
> +	}
> +
> +	return count;
> +}
> +static DEVICE_ATTR_RW(coredump);
> +
>  /* Expose the loaded / running firmware name via sysfs */
>  static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
>  			  char *buf)
> @@ -138,6 +201,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
>  static DEVICE_ATTR_RO(name);
>  
>  static struct attribute *rproc_attrs[] = {
> +	&dev_attr_coredump.attr,

This patch it guaranteed to break someone's user space but I don't think debugfs
is part of the ABI (other people may disagree with me).

Please make the feature configurable in order to give people the choice of
making it available to users or not. 

>  	&dev_attr_firmware.attr,
>  	&dev_attr_state.attr,
>  	&dev_attr_name.attr,
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-28 23:08 [PATCH 0/2] Move recovery and coredump interface " Rishabh Bhatnagar
2020-07-28 23:08 ` [PATCH 1/2] remoteproc: Move coredump entry from debugfs " Rishabh Bhatnagar
2020-08-18 20:02   ` Mathieu Poirier [this message]
2020-07-28 23:08 ` [PATCH 2/2] remoteproc: Move recovery debugfs entry " Rishabh Bhatnagar
2020-08-18 20:12   ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200818200252.GA3804229@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=psodagud@codeaurora.org \
    --cc=rishabhb@codeaurora.org \
    --cc=sidgup@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git