Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH 8/9] rpmsg: virtio: use rpmsg_ns driver to manage ns announcement
Date: Tue, 25 Aug 2020 10:54:33 -0600
Message-ID: <20200825165433.GA4141387@xps15> (raw)
In-Reply-To: <20200731114732.12815-9-arnaud.pouliquen@st.com>

Hi Arnaud,

On Fri, Jul 31, 2020 at 01:47:31PM +0200, Arnaud Pouliquen wrote:
> Use the new rpmsg_ns API to send the name service announcements if
> the VIRTIO_RPMSG_F_NS is set, else just not implement the ops.
> 
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
> ---
>  drivers/rpmsg/virtio_rpmsg_bus.c | 94 +++++---------------------------
>  1 file changed, 13 insertions(+), 81 deletions(-)
> 
> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
> index f771fdae150e..3c771a6392be 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -91,35 +91,6 @@ struct rpmsg_hdr {
>  	u8 data[];
>  } __packed;
>  
> -/**
> - * struct rpmsg_ns_msg - dynamic name service announcement message
> - * @name: name of remote service that is published
> - * @addr: address of remote service that is published
> - * @flags: indicates whether service is created or destroyed
> - *
> - * This message is sent across to publish a new service, or announce
> - * about its removal. When we receive these messages, an appropriate
> - * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
> - * or ->remove() handler of the appropriate rpmsg driver will be invoked
> - * (if/as-soon-as one is registered).
> - */
> -struct rpmsg_ns_msg {
> -	char name[RPMSG_NAME_SIZE];
> -	__virtio32 addr;
> -	__virtio32 flags;
> -} __packed;
> -
> -/**
> - * enum rpmsg_ns_flags - dynamic name service announcement flags
> - *
> - * @RPMSG_NS_CREATE: a new remote service was just created
> - * @RPMSG_NS_DESTROY: a known remote service was just destroyed
> - */
> -enum rpmsg_ns_flags {
> -	RPMSG_NS_CREATE		= 0,
> -	RPMSG_NS_DESTROY	= 1,
> -};
> -
>  /**
>   * @vrp: the remote processor this channel belongs to
>   */
> @@ -324,60 +295,18 @@ static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept)
>  	__rpmsg_destroy_ept(vch->vrp, ept);
>  }
>  
> -static int virtio_rpmsg_announce_create(struct rpmsg_device *rpdev)
> -{
> -	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
> -	struct virtproc_info *vrp = vch->vrp;
> -	struct device *dev = &rpdev->dev;
> -	int err = 0;
> -
> -	/* need to tell remote processor's name service about this channel ? */
> -	if (rpdev->announce && rpdev->ept &&
> -	    virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) {
> -		struct rpmsg_ns_msg nsm;
> -
> -		strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> -		nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
> -		nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_CREATE);
> -
> -		err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> -		if (err)
> -			dev_err(dev, "failed to announce service %d\n", err);
> -	}
> -
> -	return err;
> -}
> -
> -static int virtio_rpmsg_announce_destroy(struct rpmsg_device *rpdev)
> -{
> -	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
> -	struct virtproc_info *vrp = vch->vrp;
> -	struct device *dev = &rpdev->dev;
> -	int err = 0;
> -
> -	/* tell remote processor's name service we're removing this channel */
> -	if (rpdev->announce && rpdev->ept &&
> -	    virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS)) {
> -		struct rpmsg_ns_msg nsm;
> -
> -		strncpy(nsm.name, rpdev->id.name, RPMSG_NAME_SIZE);
> -		nsm.addr = cpu_to_virtio32(vrp->vdev, rpdev->ept->addr);
> -		nsm.flags = cpu_to_virtio32(vrp->vdev, RPMSG_NS_DESTROY);
> -
> -		err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm), RPMSG_NS_ADDR);
> -		if (err)
> -			dev_err(dev, "failed to announce service %d\n", err);
> -	}
> -
> -	return err;
> -}
> -
>  static const struct rpmsg_device_ops virtio_rpmsg_ops = {
>  	.create_channel = virtio_rpmsg_create_channel,
>  	.release_channel = virtio_rpmsg_release_channel,
>  	.create_ept = virtio_rpmsg_create_ept,
> -	.announce_create = virtio_rpmsg_announce_create,
> -	.announce_destroy = virtio_rpmsg_announce_destroy,
> +};
> +
> +static const struct rpmsg_device_ops virtio_rpmsg_w_nsa_ops = {
> +	.create_channel = virtio_rpmsg_create_channel,
> +	.release_channel = virtio_rpmsg_release_channel,
> +	.create_ept = virtio_rpmsg_create_ept,
> +	.announce_create = rpmsg_ns_announce_create,
> +	.announce_destroy = rpmsg_ns_announce_destroy,
>  };
>  
>  static void virtio_rpmsg_release_device(struct device *dev)
> @@ -423,7 +352,10 @@ __rpmsg_create_channel(struct virtproc_info *vrp,
>  	rpdev = &vch->rpdev;
>  	rpdev->src = chinfo->src;
>  	rpdev->dst = chinfo->dst;
> -	rpdev->ops = &virtio_rpmsg_ops;
> +	if (virtio_has_feature(vrp->vdev, VIRTIO_RPMSG_F_NS))
> +		rpdev->ops = &virtio_rpmsg_w_nsa_ops;
> +	else
> +		rpdev->ops = &virtio_rpmsg_ops;

Yesterday I struggled with this part and I still do this morning.  Function
__rpmsg_create_channel() can only be called if VIRTIO_RPMSG_F_NS is set so there
is no need to check it again.  I would also have expected this patch to be a
simple replace of the .announce_create/destroy functions.  Adding an ops that
doesn't have the .announce_create/destroy functions looks like a feature to me,
and one that I don't quite get.

Do you think you could expand on the motivation behind this patch?

Thanks,
Mathieu 

>  
>  	/*
>  	 * rpmsg server channels has predefined local address (for now),
> @@ -933,7 +865,7 @@ static int rpmsg_probe(struct virtio_device *vdev)
>  
>  		/* Assign public information to the rpmsg_device */
>  		rpdev_ns = &vch->rpdev;
> -		rpdev_ns->ops = &virtio_rpmsg_ops;
> +		rpdev_ns->ops = &virtio_rpmsg_w_nsa_ops;
>  
>  		rpdev_ns->dev.parent = &vrp->vdev->dev;
>  		rpdev_ns->dev.release = virtio_rpmsg_release_device;
> -- 
> 2.17.1
> 

  reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-31 11:47 [PATCH 0/9] introduce name service announcement rpmsg driver Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 1/9] rpmsg: virtio: rename rpmsg_create_channel Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 2/9] rpmsg: core: add channel creation internal API Arnaud Pouliquen
2020-08-24 22:44   ` Mathieu Poirier
2020-07-31 11:47 ` [PATCH 3/9] rpmsg: virtio: add rpmsg channel device ops Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 4/9] rpmsg: define the name service announcement as reserved address Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 5/9] rpmsg: introduce reserved rpmsg driver for ns announcement Arnaud Pouliquen
2020-08-05  9:05   ` kernel test robot
2020-08-24 22:47   ` Mathieu Poirier
2020-08-25 11:57     ` Arnaud POULIQUEN
2020-08-25 14:36       ` Mathieu Poirier
2020-07-31 11:47 ` [PATCH 6/9] rpmsg: virtio: use rpmsg ns device for the " Arnaud Pouliquen
2020-08-24 22:48   ` Mathieu Poirier
2020-08-25 12:02     ` Arnaud POULIQUEN
2020-07-31 11:47 ` [PATCH 7/9] rpmsg: ns: add name service announcement service Arnaud Pouliquen
2020-07-31 11:47 ` [PATCH 8/9] rpmsg: virtio: use rpmsg_ns driver to manage ns announcement Arnaud Pouliquen
2020-08-25 16:54   ` Mathieu Poirier [this message]
2020-08-26  7:42     ` Arnaud POULIQUEN
2020-08-26 22:10       ` Mathieu Poirier
2020-08-27  7:03         ` Arnaud POULIQUEN
2020-07-31 11:47 ` [PATCH 9/9] rpmsg: ns: name service announcement endianness Arnaud Pouliquen
2020-08-24 23:04   ` Mathieu Poirier
2020-08-20 22:32 ` [PATCH 0/9] introduce name service announcement rpmsg driver Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200825165433.GA4141387@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=arnaud.pouliquen@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git