Re: [PATCH V4 5/8] remoteproc: imx_rproc: initial support for mutilple start/stop method

[Mathieu Poirier <mathieu.poirier@linaro.org>]

On Thu, Apr 15, 2021 at 09:27:38PM +0800, peng.fan@oss.nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add three methods IMX_RPROC_NONE(no need start/stop), IMX_RPROC_MMIO
> (start/stop through mmio) and IMX_RPROC_SMC(start/stop through ARM SMCCC).
> 
> The current SoCs supported are all using IMX_RPROC_MMIO, add a restrict
> in imx_rproc_detect_mode that only SoCs using IMX_RPROC_MMIO needs syscon
> regmap to access registers.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 51 +++++++++++++++++++++++++++++-------------
>  1 file changed, 35 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 06dac92..2b633fd 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -74,6 +74,15 @@ struct imx_rproc_att {
>  	int flags;
>  };
>  
> +/* Remote core start/stop method */
> +enum imx_rproc_method {
> +	IMX_RPROC_NONE,
> +	/* Through syscon regmap */
> +	IMX_RPROC_MMIO,
> +	/* Through ARM SMCCC */
> +	IMX_RPROC_SMC,
> +};
> +
>  struct imx_rproc_dcfg {
>  	u32				src_reg;
>  	u32				src_mask;
> @@ -81,6 +90,7 @@ struct imx_rproc_dcfg {
>  	u32				src_stop;
>  	const struct imx_rproc_att	*att;
>  	size_t				att_size;
> +	enum imx_rproc_method		method;
>  };
>  
>  struct imx_rproc {
> @@ -183,6 +193,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
>  	.src_stop	= IMX7D_M4_STOP,
>  	.att		= imx_rproc_att_imx8mq,
>  	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mq),
> +	.method		= IMX_RPROC_MMIO,
>  };
>  
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
> @@ -192,6 +203,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
>  	.src_stop	= IMX7D_M4_STOP,
>  	.att		= imx_rproc_att_imx7d,
>  	.att_size	= ARRAY_SIZE(imx_rproc_att_imx7d),
> +	.method		= IMX_RPROC_MMIO,
>  };
>  
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx6sx = {
> @@ -201,6 +213,7 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx6sx = {
>  	.src_stop	= IMX6SX_M4_STOP,
>  	.att		= imx_rproc_att_imx6sx,
>  	.att_size	= ARRAY_SIZE(imx_rproc_att_imx6sx),
> +	.method		= IMX_RPROC_MMIO,
>  };
>  
>  static int imx_rproc_start(struct rproc *rproc)
> @@ -560,19 +573,35 @@ static void imx_rproc_free_mbox(struct rproc *rproc)
>  
>  static int imx_rproc_detect_mode(struct imx_rproc *priv)
>  {
> +	struct regmap_config config = { .name = "imx-rproc" };
>  	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
>  	struct device *dev = priv->dev;
> +	struct regmap *regmap;
>  	int ret;
>  	u32 val;
>  
> -	ret = regmap_read(priv->regmap, dcfg->src_reg, &val);
> -	if (ret) {
> -		dev_err(dev, "Failed to read src\n");
> -		return ret;
> +	if (dcfg->method != IMX_RPROC_MMIO)
> +		return 0;
> +
> +	regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
> +	if (IS_ERR(regmap)) {
> +		dev_err(dev, "failed to find syscon\n");
> +		return PTR_ERR(regmap);
>  	}
>  
> -	if (!(val & dcfg->src_stop))
> -		priv->rproc->state = RPROC_DETACHED;
> +	priv->regmap = regmap;
> +	regmap_attach_dev(dev, regmap, &config);
> +
> +	if (regmap) {

This if() statement is not needed.  Moreover all the modifications in this
function should go under a IMX_RPROC_MMIO case statement in patch 7.

> +		ret = regmap_read(regmap, dcfg->src_reg, &val);
> +		if (ret) {
> +			dev_err(dev, "Failed to read src\n");
> +			return ret;
> +		}
> +
> +		if (!(val & dcfg->src_stop))
> +			priv->rproc->state = RPROC_DETACHED;
> +	}
>  
>  	return 0;
>  }
> @@ -583,18 +612,9 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	struct device_node *np = dev->of_node;
>  	struct imx_rproc *priv;
>  	struct rproc *rproc;
> -	struct regmap_config config = { .name = "imx-rproc" };
>  	const struct imx_rproc_dcfg *dcfg;
> -	struct regmap *regmap;
>  	int ret;
>  
> -	regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
> -	if (IS_ERR(regmap)) {
> -		dev_err(dev, "failed to find syscon\n");
> -		return PTR_ERR(regmap);
> -	}
> -	regmap_attach_dev(dev, regmap, &config);
> -
>  	/* set some other name then imx */
>  	rproc = rproc_alloc(dev, "imx-rproc", &imx_rproc_ops,
>  			    NULL, sizeof(*priv));
> @@ -609,7 +629,6 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  
>  	priv = rproc->priv;
>  	priv->rproc = rproc;
> -	priv->regmap = regmap;
>  	priv->dcfg = dcfg;
>  	priv->dev = dev;
>  
> -- 
> 2.7.4
>