linux-remoteproc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: peng.fan@oss.nxp.com
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
	o.rempel@pengutronix.de, robh+dt@kernel.org,
	devicetree@vger.kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V4 7/8] remoteproc: imx_rproc: support i.MX7ULP
Date: Fri, 16 Apr 2021 11:47:09 -0600	[thread overview]
Message-ID: <20210416174709.GD1050209@xps15> (raw)
In-Reply-To: <1618493261-32606-8-git-send-email-peng.fan@oss.nxp.com>

On Thu, Apr 15, 2021 at 09:27:40PM +0800, peng.fan@oss.nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> i.MX7ULP A7 core runs under control of M4 core, M4 core starts by ROM
> and powers most serivces used by A7 core, so A7 core has no power to

s/serivces/services

> start and stop M4 core. And the M4 core's state is default RPROC_DETACHED
> and remoteproc framework not able to stop the M4 core.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 56dfcc1..0592865 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -136,6 +136,14 @@ static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
>  	{ 0x40000000, 0x40000000, 0x80000000, 0 },
>  };
>  
> +static const struct imx_rproc_att imx_rproc_att_imx7ulp[] = {
> +	{0x1FFD0000, 0x1FFD0000, 0x30000, ATT_OWN},
> +	{0x20000000, 0x20000000, 0x10000, ATT_OWN},
> +	{0x2F000000, 0x2F000000, 0x20000, ATT_OWN},
> +	{0x2F020000, 0x2F020000, 0x20000, ATT_OWN},
> +	{0x60000000, 0x60000000, 0x40000000, 0}
> +};
> +
>  static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
>  	/* dev addr , sys addr  , size	    , flags */
>  	/* OCRAM_S (M4 Boot code) - alias */
> @@ -196,6 +204,12 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
>  	.method		= IMX_RPROC_MMIO,
>  };
>  
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx7ulp = {
> +	.att		= imx_rproc_att_imx7ulp,
> +	.att_size	= ARRAY_SIZE(imx_rproc_att_imx7ulp),
> +	.method		= IMX_RPROC_NONE,
> +};
> +
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
>  	.src_reg	= IMX7D_SRC_SCR,
>  	.src_mask	= IMX7D_M4_RST_MASK,
> @@ -238,6 +252,9 @@ static int imx_rproc_stop(struct rproc *rproc)
>  	struct device *dev = priv->dev;
>  	int ret;
>  
> +	if (dcfg->method == IMX_RPROC_NONE)
> +		return -EOPNOTSUPP;
> +
>  	ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
>  				 dcfg->src_mask, dcfg->src_stop);
>  	if (ret)
> @@ -580,8 +597,13 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
>  	int ret;
>  	u32 val;
>  
> -	if (dcfg->method != IMX_RPROC_MMIO)
> +	switch (dcfg->method) {
> +	case IMX_RPROC_NONE:
> +		priv->rproc->state = RPROC_DETACHED;
>  		return 0;
> +	default:
> +		break;
> +	}
>  
>  	regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
>  	if (IS_ERR(regmap)) {
> @@ -726,6 +748,7 @@ static int imx_rproc_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id imx_rproc_of_match[] = {
> +	{ .compatible = "fsl,imx7ulp-cm4", .data = &imx_rproc_cfg_imx7ulp },
>  	{ .compatible = "fsl,imx7d-cm4", .data = &imx_rproc_cfg_imx7d },
>  	{ .compatible = "fsl,imx6sx-cm4", .data = &imx_rproc_cfg_imx6sx },
>  	{ .compatible = "fsl,imx8mq-cm4", .data = &imx_rproc_cfg_imx8mq },
> -- 
> 2.7.4
> 

  reply	other threads:[~2021-04-16 17:47 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-15 13:27 [PATCH V4 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP peng.fan
2021-04-15 13:27 ` [PATCH V4 1/8] dt-bindings: remoteproc: imx_rproc: add fsl,auto-boot property peng.fan
2021-04-15 13:27 ` [PATCH V4 2/8] dt-bindings: remoteproc: imx_rproc: add i.MX7ULP support peng.fan
2021-04-15 13:27 ` [PATCH V4 3/8] dt-bindings: remoteproc: imx_rproc: support i.MX8MN/P peng.fan
2021-04-15 13:27 ` [PATCH V4 4/8] remoteproc: imx_rproc: parse fsl,auto-boot peng.fan
2021-04-16 17:41   ` Mathieu Poirier
2021-04-15 13:27 ` [PATCH V4 5/8] remoteproc: imx_rproc: initial support for mutilple start/stop method peng.fan
2021-04-16 17:44   ` Mathieu Poirier
2021-04-15 13:27 ` [PATCH V4 6/8] remoteproc: imx_rproc: make clk optional peng.fan
2021-04-16 17:46   ` Mathieu Poirier
2021-04-15 13:27 ` [PATCH V4 7/8] remoteproc: imx_rproc: support i.MX7ULP peng.fan
2021-04-16 17:47   ` Mathieu Poirier [this message]
2021-04-15 13:27 ` [PATCH V4 8/8] remoteproc: imx_rproc: support i.MX8MN/P peng.fan
2021-04-16 17:58 ` [PATCH V4 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210416174709.GD1050209@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=ohad@wizery.com \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).