From: Rob Herring <robh@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH] dt-bindings: remoteproc: Drop unneeded quotes
Date: Mon, 27 Mar 2023 12:01:13 -0500 [thread overview]
Message-ID: <20230327170114.4102315-1-robh@kernel.org> (raw)
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../remoteproc/amlogic,meson-mx-ao-arc.yaml | 4 ++--
.../bindings/remoteproc/fsl,imx-rproc.yaml | 4 ++--
.../bindings/remoteproc/ingenic,vpu.yaml | 4 ++--
.../bindings/remoteproc/qcom,glink-edge.yaml | 2 +-
.../bindings/remoteproc/qcom,smd-edge.yaml | 2 +-
.../bindings/remoteproc/renesas,rcar-rproc.yaml | 4 ++--
.../bindings/remoteproc/st,stm32-rproc.yaml | 14 +++++++-------
7 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
index 11cb42a3fdd1..3100cb870170 100644
--- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/remoteproc/amlogic,meson-mx-ao-arc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson AO ARC Remote Processor
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index ae2eab4452dd..0c3910f152d1 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX Co-Processor
diff --git a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
index 85b1e43cab08..8b55dbd909b0 100644
--- a/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/remoteproc/ingenic,vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Ingenic Video Processing Unit
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
index 15e6851e1ff8..7b43ad3daa56 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -15,7 +15,7 @@ description:
properties:
$nodename:
- const: "glink-edge"
+ const: glink-edge
apr:
$ref: /schemas/soc/qcom/qcom,apr.yaml#
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
index 7ec8a6b6682c..02c85b420c1a 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
@@ -21,7 +21,7 @@ description:
properties:
$nodename:
- const: "smd-edge"
+ const: smd-edge
apr:
$ref: /schemas/soc/qcom/qcom,apr.yaml#
diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
index 7e0275d31a3c..4bea679a0f61 100644
--- a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas R-Car remote processor controller
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index 66b1e3efdaa3..37c0d7b4ceef 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/remoteproc/st,stm32-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 remote processor controller
@@ -29,7 +29,7 @@ properties:
st,syscfg-holdboot:
description: remote processor reset hold boot
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: Phandle of syscon block
@@ -39,7 +39,7 @@ properties:
st,syscfg-tz:
description:
Reference to the system configuration which holds the RCC trust zone mode
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: Phandle of syscon block
@@ -95,7 +95,7 @@ properties:
(see ../reserved-memory/reserved-memory.txt)
st,syscfg-pdds:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: |
Reference to the system configuration which holds the remote
items:
@@ -105,7 +105,7 @@ properties:
- description: The field mask of the PDDS selection
st,syscfg-m4-state:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: |
Reference to the tamp register which exposes the Cortex-M4 state.
items:
@@ -115,7 +115,7 @@ properties:
- description: The field mask of the Cortex-M4 state
st,syscfg-rsc-tbl:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
description: |
Reference to the tamp register which references the Cortex-M4
resource table address.
--
2.39.2
next reply other threads:[~2023-03-27 17:01 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-27 17:01 Rob Herring [this message]
2023-03-28 6:44 ` [PATCH] dt-bindings: remoteproc: Drop unneeded quotes Krzysztof Kozlowski
2023-03-29 17:21 ` Mathieu Poirier
2023-04-18 16:09 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230327170114.4102315-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=agross@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=jbrunet@baylibre.com \
--cc=kernel@pengutronix.de \
--cc=khilman@baylibre.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=mathieu.poirier@linaro.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=neil.armstrong@linaro.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).