* [PATCH] remoteproc: core: Move cdev add before device add @ 2021-04-20 19:26 Siddharth Gupta 2021-04-22 18:04 ` Mathieu Poirier 2021-06-23 21:50 ` patchwork-bot+linux-remoteproc 0 siblings, 2 replies; 6+ messages in thread From: Siddharth Gupta @ 2021-04-20 19:26 UTC (permalink / raw) To: bjorn.andersson, ohad, linux-remoteproc, linux-kernel Cc: Siddharth Gupta, psodagud, eberman When cdev_add is called after device_add has been called there is no way for the userspace to know about the addition of a cdev as cdev_add itself doesn't trigger a uevent notification, or for the kernel to know about the change to devt. This results in two problems: - mknod is never called for the cdev and hence no cdev appears on devtmpfs. - sysfs links to the new cdev are not established. Based on how cdev_device_add[1] is written, it appears that the correct way to use these APIs is to call cdev_add before device_add is called. Since the cdev is an optional feature for remoteproc we cannot directly use the existing API. Hence moving rproc_char_device_add() before device_add() in rproc_add(). [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/char_dev.c#n537 Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> --- drivers/remoteproc/remoteproc_core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 626a6b90f..562355a 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -2316,6 +2316,11 @@ int rproc_add(struct rproc *rproc) struct device *dev = &rproc->dev; int ret; + /* add char device for this remoteproc */ + ret = rproc_char_device_add(rproc); + if (ret < 0) + return ret; + ret = device_add(dev); if (ret < 0) return ret; @@ -2329,11 +2334,6 @@ int rproc_add(struct rproc *rproc) /* create debugfs entries */ rproc_create_debug_dir(rproc); - /* add char device for this remoteproc */ - ret = rproc_char_device_add(rproc); - if (ret < 0) - return ret; - /* if rproc is marked always-on, request it to boot */ if (rproc->auto_boot) { ret = rproc_trigger_auto_boot(rproc); -- Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] remoteproc: core: Move cdev add before device add 2021-04-20 19:26 [PATCH] remoteproc: core: Move cdev add before device add Siddharth Gupta @ 2021-04-22 18:04 ` Mathieu Poirier 2021-04-23 2:12 ` Siddharth Gupta 2021-06-23 21:50 ` patchwork-bot+linux-remoteproc 1 sibling, 1 reply; 6+ messages in thread From: Mathieu Poirier @ 2021-04-22 18:04 UTC (permalink / raw) To: Siddharth Gupta Cc: bjorn.andersson, ohad, linux-remoteproc, linux-kernel, psodagud, eberman Hi Siddharth, On Tue, Apr 20, 2021 at 12:26:45PM -0700, Siddharth Gupta wrote: > When cdev_add is called after device_add has been called there is no > way for the userspace to know about the addition of a cdev as cdev_add > itself doesn't trigger a uevent notification, or for the kernel to > know about the change to devt. This results in two problems: > - mknod is never called for the cdev and hence no cdev appears on > devtmpfs. > - sysfs links to the new cdev are not established. > > Based on how cdev_device_add[1] is written, it appears that the correct Please don't add this kind of reference to the change log as it will become invalid with time. > way to use these APIs is to call cdev_add before device_add is called. > Since the cdev is an optional feature for remoteproc we cannot directly > use the existing API. Please explain why the existing API can't be used directly. > Hence moving rproc_char_device_add() before > device_add() in rproc_add(). > > [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/char_dev.c#n537 > > Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> > --- > drivers/remoteproc/remoteproc_core.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 626a6b90f..562355a 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -2316,6 +2316,11 @@ int rproc_add(struct rproc *rproc) > struct device *dev = &rproc->dev; > int ret; > > + /* add char device for this remoteproc */ > + ret = rproc_char_device_add(rproc); > + if (ret < 0) > + return ret; > + I have tested this change and it works. So how did it work before? > ret = device_add(dev); > if (ret < 0) > return ret; > @@ -2329,11 +2334,6 @@ int rproc_add(struct rproc *rproc) > /* create debugfs entries */ > rproc_create_debug_dir(rproc); > > - /* add char device for this remoteproc */ > - ret = rproc_char_device_add(rproc); > - if (ret < 0) > - return ret; > - While reviewing this patch I had another look at rproc_add() and noticed it doesn't clean up after itself in case of failure. If any of the conditions aren't met the function returns but rproc_delete_debug_dir(), rproc_char_device_remove() and device_del() aren't called. Please fix that as part of your next revision. Thanks, Mathieu > /* if rproc is marked always-on, request it to boot */ > if (rproc->auto_boot) { > ret = rproc_trigger_auto_boot(rproc); > -- > Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] remoteproc: core: Move cdev add before device add 2021-04-22 18:04 ` Mathieu Poirier @ 2021-04-23 2:12 ` Siddharth Gupta 2021-04-23 3:01 ` Bjorn Andersson 0 siblings, 1 reply; 6+ messages in thread From: Siddharth Gupta @ 2021-04-23 2:12 UTC (permalink / raw) To: Mathieu Poirier Cc: bjorn.andersson, ohad, linux-remoteproc, linux-kernel, psodagud, eberman On 4/22/2021 11:04 AM, Mathieu Poirier wrote: > Hi Siddharth, > > On Tue, Apr 20, 2021 at 12:26:45PM -0700, Siddharth Gupta wrote: >> When cdev_add is called after device_add has been called there is no >> way for the userspace to know about the addition of a cdev as cdev_add >> itself doesn't trigger a uevent notification, or for the kernel to >> know about the change to devt. This results in two problems: >> - mknod is never called for the cdev and hence no cdev appears on >> devtmpfs. >> - sysfs links to the new cdev are not established. >> >> Based on how cdev_device_add[1] is written, it appears that the correct > Please don't add this kind of reference to the change log as it will become > invalid with time. Okay sure, I will remove it. > >> way to use these APIs is to call cdev_add before device_add is called. >> Since the cdev is an optional feature for remoteproc we cannot directly >> use the existing API. > Please explain why the existing API can't be used directly. Not sure what you mean here Mathieu? The reason why we can't use it is because cdev is an optional feature. We would either have to move device_add inside rproc_char_dev_add or the other way around and make cdev a regular feature. Since device_add can't be called on the same device struct twice[1], we have to do things this way. Also this way we don't have to rely on the userspace to call mknod as it will be called[2] as a part of the device_add call in devtmpfs_create_node. Now that I think about it, is the above what you want me to put in the commit text? :) [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/core.c#n3105 [2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/devtmpfs.c#n215 > >> Hence moving rproc_char_device_add() before >> device_add() in rproc_add(). >> >> [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/char_dev.c#n537 >> >> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> >> --- >> drivers/remoteproc/remoteproc_core.c | 10 +++++----- >> 1 file changed, 5 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >> index 626a6b90f..562355a 100644 >> --- a/drivers/remoteproc/remoteproc_core.c >> +++ b/drivers/remoteproc/remoteproc_core.c >> @@ -2316,6 +2316,11 @@ int rproc_add(struct rproc *rproc) >> struct device *dev = &rproc->dev; >> int ret; >> >> + /* add char device for this remoteproc */ >> + ret = rproc_char_device_add(rproc); >> + if (ret < 0) >> + return ret; >> + > I have tested this change and it works. So how did it work before? It is a sporadic issue due to a race between the userspace uevent handler and cdev_add. If the uevent for the device is received/processed after cdev_add the cdev is created. If "add" is written to the uevent file or mknod is manually called for devt the cdev works as expected, just that the sysfs links won't be created. > >> ret = device_add(dev); >> if (ret < 0) >> return ret; >> @@ -2329,11 +2334,6 @@ int rproc_add(struct rproc *rproc) >> /* create debugfs entries */ >> rproc_create_debug_dir(rproc); >> >> - /* add char device for this remoteproc */ >> - ret = rproc_char_device_add(rproc); >> - if (ret < 0) >> - return ret; >> - > While reviewing this patch I had another look at rproc_add() and noticed it > doesn't clean up after itself in case of failure. If any of the conditions > aren't met the function returns but rproc_delete_debug_dir(), > rproc_char_device_remove() and device_del() aren't called. Please fix that as > part of your next revision. Sure. I'll make those changes. Thanks, Sid > > Thanks, > Mathieu > > >> /* if rproc is marked always-on, request it to boot */ >> if (rproc->auto_boot) { >> ret = rproc_trigger_auto_boot(rproc); >> -- >> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, >> a Linux Foundation Collaborative Project >> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] remoteproc: core: Move cdev add before device add 2021-04-23 2:12 ` Siddharth Gupta @ 2021-04-23 3:01 ` Bjorn Andersson 2021-04-23 21:48 ` Siddharth Gupta 0 siblings, 1 reply; 6+ messages in thread From: Bjorn Andersson @ 2021-04-23 3:01 UTC (permalink / raw) To: Siddharth Gupta Cc: Mathieu Poirier, ohad, linux-remoteproc, linux-kernel, psodagud, eberman On Thu 22 Apr 21:12 CDT 2021, Siddharth Gupta wrote: > > On 4/22/2021 11:04 AM, Mathieu Poirier wrote: > > Hi Siddharth, > > > > On Tue, Apr 20, 2021 at 12:26:45PM -0700, Siddharth Gupta wrote: > > > When cdev_add is called after device_add has been called there is no > > > way for the userspace to know about the addition of a cdev as cdev_add > > > itself doesn't trigger a uevent notification, or for the kernel to > > > know about the change to devt. This results in two problems: > > > - mknod is never called for the cdev and hence no cdev appears on > > > devtmpfs. > > > - sysfs links to the new cdev are not established. > > > > > > Based on how cdev_device_add[1] is written, it appears that the correct > > Please don't add this kind of reference to the change log as it will become > > invalid with time. > Okay sure, I will remove it. > > > > > way to use these APIs is to call cdev_add before device_add is called. > > > Since the cdev is an optional feature for remoteproc we cannot directly > > > use the existing API. > > Please explain why the existing API can't be used directly. > Not sure what you mean here Mathieu? The reason why we can't use > it is because cdev is an optional feature. We would either have to move > device_add inside rproc_char_dev_add or the other way around and > make cdev a regular feature. Since device_add can't be called on the > same device struct twice[1], we have to do things this way. Also this > way we don't have to rely on the userspace to call mknod as it will > be called[2] as a part of the device_add call in devtmpfs_create_node. > > Now that I think about it, is the above what you want me to put in the > commit text? :) > Your patch is correct, we need to cdev_add() and in particular assign dev->devt before calling device_add(). Given how the code is split in core and cdev there's no way to use cdev_device_add(), but I don't think anyone is suggesting that - except for your commit message. So while everything you mention in your commit message seems correct, you should be able to make it more to the point by distilling it down to something like: The cdev needs to be added and devt assigned before device_add() is called in order for the relevant sysfs and devtmpfs entries to be created and the uevent to be properly populated. > [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/core.c#n3105 > [2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/devtmpfs.c#n215 > > > > > Hence moving rproc_char_device_add() before > > > device_add() in rproc_add(). > > > > > > [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/char_dev.c#n537 > > > > > > Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> > > > --- > > > drivers/remoteproc/remoteproc_core.c | 10 +++++----- > > > 1 file changed, 5 insertions(+), 5 deletions(-) > > > > > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > > > index 626a6b90f..562355a 100644 > > > --- a/drivers/remoteproc/remoteproc_core.c > > > +++ b/drivers/remoteproc/remoteproc_core.c > > > @@ -2316,6 +2316,11 @@ int rproc_add(struct rproc *rproc) > > > struct device *dev = &rproc->dev; > > > int ret; > > > + /* add char device for this remoteproc */ > > > + ret = rproc_char_device_add(rproc); > > > + if (ret < 0) > > > + return ret; > > > + > > I have tested this change and it works. So how did it work before? > It is a sporadic issue due to a race between the userspace uevent handler > and cdev_add. If the uevent for the device is received/processed after > cdev_add the cdev is created. > > If "add" is written to the uevent file or mknod is manually called for devt > the cdev works as expected, just that the sysfs links won't be created. So it works for e.g. systemd based systems (most of the time), while in a system based on devtmpfs the dev node would never show up. Regards, Bjorn > > > > > ret = device_add(dev); > > > if (ret < 0) > > > return ret; > > > @@ -2329,11 +2334,6 @@ int rproc_add(struct rproc *rproc) > > > /* create debugfs entries */ > > > rproc_create_debug_dir(rproc); > > > - /* add char device for this remoteproc */ > > > - ret = rproc_char_device_add(rproc); > > > - if (ret < 0) > > > - return ret; > > > - > > While reviewing this patch I had another look at rproc_add() and noticed it > > doesn't clean up after itself in case of failure. If any of the conditions > > aren't met the function returns but rproc_delete_debug_dir(), > > rproc_char_device_remove() and device_del() aren't called. Please fix that as > > part of your next revision. > Sure. I'll make those changes. > > Thanks, > Sid > > > > Thanks, > > Mathieu > > > > > > > /* if rproc is marked always-on, request it to boot */ > > > if (rproc->auto_boot) { > > > ret = rproc_trigger_auto_boot(rproc); > > > -- > > > Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > > > a Linux Foundation Collaborative Project > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] remoteproc: core: Move cdev add before device add 2021-04-23 3:01 ` Bjorn Andersson @ 2021-04-23 21:48 ` Siddharth Gupta 0 siblings, 0 replies; 6+ messages in thread From: Siddharth Gupta @ 2021-04-23 21:48 UTC (permalink / raw) To: Bjorn Andersson Cc: Mathieu Poirier, ohad, linux-remoteproc, linux-kernel, psodagud, eberman On 4/22/2021 8:01 PM, Bjorn Andersson wrote: > On Thu 22 Apr 21:12 CDT 2021, Siddharth Gupta wrote: > >> On 4/22/2021 11:04 AM, Mathieu Poirier wrote: >>> Hi Siddharth, >>> >>> On Tue, Apr 20, 2021 at 12:26:45PM -0700, Siddharth Gupta wrote: >>>> When cdev_add is called after device_add has been called there is no >>>> way for the userspace to know about the addition of a cdev as cdev_add >>>> itself doesn't trigger a uevent notification, or for the kernel to >>>> know about the change to devt. This results in two problems: >>>> - mknod is never called for the cdev and hence no cdev appears on >>>> devtmpfs. >>>> - sysfs links to the new cdev are not established. >>>> >>>> Based on how cdev_device_add[1] is written, it appears that the correct >>> Please don't add this kind of reference to the change log as it will become >>> invalid with time. >> Okay sure, I will remove it. >>>> way to use these APIs is to call cdev_add before device_add is called. >>>> Since the cdev is an optional feature for remoteproc we cannot directly >>>> use the existing API. >>> Please explain why the existing API can't be used directly. >> Not sure what you mean here Mathieu? The reason why we can't use >> it is because cdev is an optional feature. We would either have to move >> device_add inside rproc_char_dev_add or the other way around and >> make cdev a regular feature. Since device_add can't be called on the >> same device struct twice[1], we have to do things this way. Also this >> way we don't have to rely on the userspace to call mknod as it will >> be called[2] as a part of the device_add call in devtmpfs_create_node. >> >> Now that I think about it, is the above what you want me to put in the >> commit text? :) >> > Your patch is correct, we need to cdev_add() and in particular assign > dev->devt before calling device_add(). Given how the code is split in > core and cdev there's no way to use cdev_device_add(), but I don't think > anyone is suggesting that - except for your commit message. > > So while everything you mention in your commit message seems correct, > you should be able to make it more to the point by distilling it down to > something like: > > The cdev needs to be added and devt assigned before device_add() is > called in order for the relevant sysfs and devtmpfs entries to be > created and the uevent to be properly populated. Okay, I will make the appropriate changes. Thanks! >> [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/core.c#n3105 >> [2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/base/devtmpfs.c#n215 >>>> Hence moving rproc_char_device_add() before >>>> device_add() in rproc_add(). >>>> >>>> [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/char_dev.c#n537 >>>> >>>> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> >>>> --- >>>> drivers/remoteproc/remoteproc_core.c | 10 +++++----- >>>> 1 file changed, 5 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >>>> index 626a6b90f..562355a 100644 >>>> --- a/drivers/remoteproc/remoteproc_core.c >>>> +++ b/drivers/remoteproc/remoteproc_core.c >>>> @@ -2316,6 +2316,11 @@ int rproc_add(struct rproc *rproc) >>>> struct device *dev = &rproc->dev; >>>> int ret; >>>> + /* add char device for this remoteproc */ >>>> + ret = rproc_char_device_add(rproc); >>>> + if (ret < 0) >>>> + return ret; >>>> + >>> I have tested this change and it works. So how did it work before? >> It is a sporadic issue due to a race between the userspace uevent handler >> and cdev_add. If the uevent for the device is received/processed after >> cdev_add the cdev is created. >> >> If "add" is written to the uevent file or mknod is manually called for devt >> the cdev works as expected, just that the sysfs links won't be created. > So it works for e.g. systemd based systems (most of the time), while in > a system based on devtmpfs the dev node would never show up. Yes exactly! We were just lucky till now :) Thanks, Sid > Regards, > Bjorn > >>>> ret = device_add(dev); >>>> if (ret < 0) >>>> return ret; >>>> @@ -2329,11 +2334,6 @@ int rproc_add(struct rproc *rproc) >>>> /* create debugfs entries */ >>>> rproc_create_debug_dir(rproc); >>>> - /* add char device for this remoteproc */ >>>> - ret = rproc_char_device_add(rproc); >>>> - if (ret < 0) >>>> - return ret; >>>> - >>> While reviewing this patch I had another look at rproc_add() and noticed it >>> doesn't clean up after itself in case of failure. If any of the conditions >>> aren't met the function returns but rproc_delete_debug_dir(), >>> rproc_char_device_remove() and device_del() aren't called. Please fix that as >>> part of your next revision. >> Sure. I'll make those changes. >> >> Thanks, >> Sid >>> Thanks, >>> Mathieu >>> >>> >>>> /* if rproc is marked always-on, request it to boot */ >>>> if (rproc->auto_boot) { >>>> ret = rproc_trigger_auto_boot(rproc); >>>> -- >>>> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, >>>> a Linux Foundation Collaborative Project >>>> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] remoteproc: core: Move cdev add before device add 2021-04-20 19:26 [PATCH] remoteproc: core: Move cdev add before device add Siddharth Gupta 2021-04-22 18:04 ` Mathieu Poirier @ 2021-06-23 21:50 ` patchwork-bot+linux-remoteproc 1 sibling, 0 replies; 6+ messages in thread From: patchwork-bot+linux-remoteproc @ 2021-06-23 21:50 UTC (permalink / raw) To: Siddharth Gupta; +Cc: linux-remoteproc Hello: This patch was applied to andersson/remoteproc.git (refs/heads/for-next): On Tue, 20 Apr 2021 12:26:45 -0700 you wrote: > When cdev_add is called after device_add has been called there is no > way for the userspace to know about the addition of a cdev as cdev_add > itself doesn't trigger a uevent notification, or for the kernel to > know about the change to devt. This results in two problems: > - mknod is never called for the cdev and hence no cdev appears on > devtmpfs. > - sysfs links to the new cdev are not established. > > [...] Here is the summary with links: - remoteproc: core: Move cdev add before device add https://git.kernel.org/andersson/remoteproc/c/c6659ee893e2 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-06-23 21:50 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-04-20 19:26 [PATCH] remoteproc: core: Move cdev add before device add Siddharth Gupta 2021-04-22 18:04 ` Mathieu Poirier 2021-04-23 2:12 ` Siddharth Gupta 2021-04-23 3:01 ` Bjorn Andersson 2021-04-23 21:48 ` Siddharth Gupta 2021-06-23 21:50 ` patchwork-bot+linux-remoteproc
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).