Linux-remoteproc Archive on lore.kernel.org
 help / color / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Rishabh Bhatnagar <rishabhb@codeaurora.org>,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	bjorn.andersson@linaro.org, tsoni@codeaurora.org,
	psodagud@codeaurora.org, sidgup@codeaurora.org,
	linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v1 2/4] remoteproc: qcom_q6v5_mss: Replace mask based tracking with size
Date: Tue, 14 Jul 2020 23:42:49 +0530
Message-ID: <a069385c747dda15fa7f037ae2930aee@codeaurora.org> (raw)
In-Reply-To: <20200714171836.GA1407705@xps15>

On 2020-07-14 22:48, Mathieu Poirier wrote:
> On Thu, Jul 09, 2020 at 01:31:54PM -0700, Rishabh Bhatnagar wrote:
>> From: Sibi Sankar <sibis@codeaurora.org>
>> 
>> In order to land inline coredump support for mss, the dump_segment
>> function would need to support granularities less than the segment
>> size. This is achieved by replacing mask based tracking with size.
>> 
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>> ---
>>  drivers/remoteproc/qcom_q6v5_mss.c | 15 +++++++--------
>>  1 file changed, 7 insertions(+), 8 deletions(-)
>> 
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c 
>> b/drivers/remoteproc/qcom_q6v5_mss.c
>> index feb70283b..c6ce032 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -181,8 +181,8 @@ struct q6v5 {
>>  	bool running;
>> 
>>  	bool dump_mba_loaded;
>> -	unsigned long dump_segment_mask;
>> -	unsigned long dump_complete_mask;
>> +	size_t current_dump_size;
>> +	size_t total_dump_size;
>> 
>>  	phys_addr_t mba_phys;
>>  	void *mba_region;
>> @@ -1203,7 +1203,6 @@ static void qcom_q6v5_dump_segment(struct rproc 
>> *rproc,
>>  {
>>  	int ret = 0;
>>  	struct q6v5 *qproc = rproc->priv;
>> -	unsigned long mask = BIT((unsigned long)segment->priv);
>>  	int offset = segment->da - qproc->mpss_reloc;
>>  	void *ptr = NULL;
>> 
>> @@ -1229,10 +1228,10 @@ static void qcom_q6v5_dump_segment(struct 
>> rproc *rproc,
>>  		memset(dest, 0xff, segment->size);
>>  	}
>> 
>> -	qproc->dump_segment_mask |= mask;
>> +	qproc->current_dump_size += segment->size;
>> 
>>  	/* Reclaim mba after copying segments */
>> -	if (qproc->dump_segment_mask == qproc->dump_complete_mask) {
>> +	if (qproc->current_dump_size == qproc->total_dump_size) {
>>  		if (qproc->dump_mba_loaded) {
>>  			/* Try to reset ownership back to Q6 */
>>  			q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm,
>> @@ -1274,7 +1273,7 @@ static int q6v5_start(struct rproc *rproc)
>>  			"Failed to reclaim mba buffer system may become unstable\n");
>> 
>>  	/* Reset Dump Segment Mask */
>> -	qproc->dump_segment_mask = 0;
>> +	qproc->current_dump_size = 0;
>>  	qproc->running = true;
>> 
>>  	return 0;
>> @@ -1323,7 +1322,7 @@ static int 
>> qcom_q6v5_register_dump_segments(struct rproc *rproc,
>> 
>>  	ehdr = (struct elf32_hdr *)fw->data;
>>  	phdrs = (struct elf32_phdr *)(ehdr + 1);
>> -	qproc->dump_complete_mask = 0;
>> +	qproc->total_dump_size = 0;
>> 
>>  	for (i = 0; i < ehdr->e_phnum; i++) {
>>  		phdr = &phdrs[i];
>> @@ -1338,7 +1337,7 @@ static int 
>> qcom_q6v5_register_dump_segments(struct rproc *rproc,
>>  		if (ret)
>>  			break;
> 
> There is also no longer a need to carry the 'i' in:
> 
>                 ret = rproc_coredump_add_custom_segment(rproc, 
> phdr->p_paddr,
>                                                         phdr->p_memsz,
>                                                         
> qcom_q6v5_dump_segment,
>                                                         (void *)i);

Mathieu,
Thanks for the review. Will pass in
NULL instead in the next re-spin.

>> 
>> -		qproc->dump_complete_mask |= BIT(i);
>> +		qproc->total_dump_size += phdr->p_memsz;
>>  	}
>> 
>>  	release_firmware(fw);
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

  reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09 20:31 [PATCH v7 0/4] Extend coredump functionality Rishabh Bhatnagar
2020-07-09 20:31 ` [PATCH v7 1/4] remoteproc: Move coredump functionality to a new file Rishabh Bhatnagar
2020-07-09 20:31 ` [PATCH v1 2/4] remoteproc: qcom_q6v5_mss: Replace mask based tracking with size Rishabh Bhatnagar
2020-07-14 17:18   ` Mathieu Poirier
2020-07-14 18:12     ` Sibi Sankar [this message]
2020-07-16  8:10     ` Sibi Sankar
2020-07-16 18:24       ` rishabhb
2020-07-20 16:57   ` Mathieu Poirier
2020-07-09 20:31 ` [PATCH v7 3/4] remoteproc: Add inline coredump functionality Rishabh Bhatnagar
2020-07-14 17:53   ` Mathieu Poirier
2020-07-15 19:22     ` rishabhb
2020-07-15 21:55       ` Mathieu Poirier
2020-07-16  8:25   ` Sibi Sankar
2020-07-16 18:25     ` rishabhb
2020-07-09 20:31 ` [PATCH v7 4/4] remoteproc: Add coredump debugfs entry Rishabh Bhatnagar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a069385c747dda15fa7f037ae2930aee@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-kernel-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=psodagud@codeaurora.org \
    --cc=rishabhb@codeaurora.org \
    --cc=sidgup@codeaurora.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-remoteproc Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-remoteproc/0 linux-remoteproc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-remoteproc linux-remoteproc/ https://lore.kernel.org/linux-remoteproc \
		linux-remoteproc@vger.kernel.org
	public-inbox-index linux-remoteproc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-remoteproc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git