linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Steve Longerbeam <steve_longerbeam@mentor.com>
Subject: Re: [PATCH v2] media: i2c: adv748x: Use devm to allocate the device struct
Date: Mon, 14 Jan 2019 13:15:10 +0000	[thread overview]
Message-ID: <061caa6f-6a8f-8f1c-fe19-c9b778fcabb1@ideasonboard.com> (raw)
In-Reply-To: <20190114130622.GE30160@bigcity.dyn.berto.se>

Hi Niklas,

On 14/01/2019 13:06, Niklas Söderlund wrote:
> Hi Kieran,
> 
> Thanks for your work.
> 
> On 2019-01-11 16:17:03 +0000, Kieran Bingham wrote:
>> From: Steve Longerbeam <steve_longerbeam@mentor.com>
>>
>> Switch to devm_kzalloc() when allocating the adv748x device struct.
>>
>> The sizeof() is updated to determine the correct allocation size from
>> the dereferenced pointer type rather than hardcoding the struct type.
> 
> I would put this under a changes since v1 section and not for inclusion 
> on the commit message upstream. Apart from that

I considered that, but this is an actual change as well as the
s/kzalloc/devm_kzalloc/ on top of the existing code - so I felt it was
worthy of keeping in the changelog.

(The original code uses sizeof(struct...) instead of sizeof(*s))

> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Thanks

Kieran


> 
>>
>> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
>> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> [Kieran: Change sizeof() to dereference the pointer type]
>> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>> ---
>>  drivers/media/i2c/adv748x/adv748x-core.c | 5 +----
>>  1 file changed, 1 insertion(+), 4 deletions(-)
>>
>> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
>> index 060d0c5b4989..1e5c7bbcf6b2 100644
>> --- a/drivers/media/i2c/adv748x/adv748x-core.c
>> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
>> @@ -674,7 +674,7 @@ static int adv748x_probe(struct i2c_client *client,
>>  	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
>>  		return -EIO;
>>  
>> -	state = kzalloc(sizeof(struct adv748x_state), GFP_KERNEL);
>> +	state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
>>  	if (!state)
>>  		return -ENOMEM;
>>  
>> @@ -772,7 +772,6 @@ static int adv748x_probe(struct i2c_client *client,
>>  	adv748x_dt_cleanup(state);
>>  err_free_mutex:
>>  	mutex_destroy(&state->mutex);
>> -	kfree(state);
>>  
>>  	return ret;
>>  }
>> @@ -791,8 +790,6 @@ static int adv748x_remove(struct i2c_client *client)
>>  	adv748x_dt_cleanup(state);
>>  	mutex_destroy(&state->mutex);
>>  
>> -	kfree(state);
>> -
>>  	return 0;
>>  }
>>  
>> -- 
>> 2.17.1
>>
> 


      reply	other threads:[~2019-01-14 13:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11 16:17 [PATCH v2] media: i2c: adv748x: Use devm to allocate the device struct Kieran Bingham
2019-01-14 13:06 ` Niklas Söderlund
2019-01-14 13:15   ` Kieran Bingham [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=061caa6f-6a8f-8f1c-fe19-c9b778fcabb1@ideasonboard.com \
    --to=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=steve_longerbeam@mentor.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).