From: Biju Das <biju.das@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Biju Das <biju.das@bp.renesas.com>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Subject: [PATCH V5 08/13] ARM: dts: r8a77470: Add USB PHY DT support
Date: Wed, 10 Apr 2019 15:48:45 +0100 [thread overview]
Message-ID: <1554907730-14792-9-git-send-email-biju.das@bp.renesas.com> (raw)
In-Reply-To: <1554907730-14792-1-git-send-email-biju.das@bp.renesas.com>
Define the r8a77470 generic part of the USB PHY device node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
---
V4-->V5
* No change
V3-->V4
* No change
V2-->V3
* Added gen3 usb2 phy nodes
V1-->V2
* New patch
---
arch/arm/boot/dts/r8a77470.dtsi | 56 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 493cf2b..dcd2975 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -325,6 +325,42 @@
status = "disabled";
};
+ usbphy0: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 704>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 704>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
+ usbphy1: usb-phy@e6598100 {
+ compatible = "renesas,usb-phy-r8a77470",
+ "renesas,rcar-gen2-usb-phy";
+ reg = <0 0xe6598100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cpg CPG_MOD 706>;
+ clock-names = "usbhs";
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 706>;
+ status = "disabled";
+
+ usb1: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ };
+
usb_dmac00: dma-controller@e65a0000 {
compatible = "renesas,r8a77470-usb-dmac",
"renesas,usb-dmac";
@@ -588,6 +624,26 @@
status = "disabled";
};
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee080200 0 0x700>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0c0200 {
+ compatible = "renesas,usb2-phy-r8a77470";
+ reg = <0 0xee0c0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 705>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 705>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a77470",
"renesas,rcar-gen2-sdhi";
--
2.7.4
next prev parent reply other threads:[~2019-04-10 14:55 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-10 14:48 [PATCH V5 00/13] Add USB2.0 support Biju Das
2019-04-10 14:48 ` [PATCH V5 01/13] dt-bindings: phy: rcar-gen2: Add r8a77470 support Biju Das
2019-04-10 14:48 ` [PATCH V5 02/13] phy: renesas: phy-rcar-gen2: Add support for r8a77470 Biju Das
2019-04-11 5:08 ` Yoshihiro Shimoda
2019-04-10 14:48 ` [PATCH V5 03/13] dt-bindings: rcar-gen3-phy-usb2: Add r8a77470 support Biju Das
2019-04-10 14:48 ` [PATCH V5 04/13] phy: rcar-gen3-usb2: Add support for r8a77470 Biju Das
2019-04-11 5:10 ` Yoshihiro Shimoda
2019-04-10 14:48 ` [PATCH V5 05/13] ARM: shmobile: Enable PHY_RCAR_GEN3_USB2 in shmobile_defconfig Biju Das
2019-04-12 12:15 ` Simon Horman
2019-04-10 14:48 ` [PATCH V5 06/13] dt-bindings: usb: renesas_usbhs: Add support for r8a77470 Biju Das
2019-04-29 9:16 ` Biju Das
2019-04-29 9:30 ` Greg Kroah-Hartman
2019-04-29 9:46 ` Biju Das
2019-04-10 14:48 ` [PATCH V5 07/13] ARM: shmobile: Enable USB [EO]HCI HCD PLATFORM support in shmobile_defconfig Biju Das
2019-04-12 12:16 ` Simon Horman
2019-04-10 14:48 ` Biju Das [this message]
2019-04-12 12:18 ` [PATCH V5 08/13] ARM: dts: r8a77470: Add USB PHY DT support Simon Horman
2019-04-30 13:00 ` Geert Uytterhoeven
2019-04-10 14:48 ` [PATCH V5 09/13] ARM: dts: iwg23s-sbc: Enable USB Phy[01] Biju Das
2019-04-12 12:21 ` Simon Horman
2019-04-10 14:48 ` [PATCH V5 10/13] ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device Biju Das
2019-04-12 12:22 ` Simon Horman
2019-04-10 14:48 ` [PATCH V5 11/13] ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host Biju Das
2019-04-10 14:48 ` [PATCH V5 12/13] ARM: dts: r8a77470: Add HSUSB device nodes Biju Das
2019-04-12 12:25 ` Simon Horman
2019-04-30 12:58 ` Geert Uytterhoeven
2019-04-10 14:48 ` [PATCH V5 13/13] ARM: dts: iwg23s-sbc: Enable HS-USB Biju Das
2019-04-12 12:26 ` Simon Horman
2019-04-17 6:07 ` [PATCH V5 00/13] Add USB2.0 support Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1554907730-14792-9-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).