linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: ulf.hansson@linaro.org, wsa+renesas@sang-engineering.com
Cc: linux-mmc@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH v2 2/2] mmc: renesas_sdhi: use multiple segments if possible
Date: Mon, 13 May 2019 13:29:04 +0900	[thread overview]
Message-ID: <1557721744-30545-3-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw)
In-Reply-To: <1557721744-30545-1-git-send-email-yoshihiro.shimoda.uh@renesas.com>

In IOMMU environment, since it's possible to merge scatter gather
buffers of memory requests to one iova, this patch changes the max_segs
value when init_card of mmc_host timing to improve the transfer
performance on renesas_sdhi_internal_dmac.

Notes that an sdio card may be possible to use scatter gather buffers
with non page aligned size, so that this driver will not use multiple
segments to avoid any trouble. Also, on renesas_sdhi_sys_dmac,
the max_segs value will change from 32 to 512, but the sys_dmac
can handle 512 segments, so that this init_card ops is added on
"TMIO_MMC_MIN_RCAR2" environment.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/mmc/host/renesas_sdhi_core.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 5e9e36e..29a7d66 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -203,6 +203,17 @@ static void renesas_sdhi_clk_disable(struct tmio_mmc_host *host)
 	clk_disable_unprepare(priv->clk_cd);
 }
 
+static void renesas_sdhi_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+	struct tmio_mmc_host *host = mmc_priv(mmc);
+
+	if (host->pdev->dev.iommu_group &&
+	    (mmc_card_mmc(card) || mmc_card_sd(card)))
+		host->mmc->max_segs = 512;
+	else
+		host->mmc->max_segs = host->pdata->max_segs;
+}
+
 static int renesas_sdhi_card_busy(struct mmc_host *mmc)
 {
 	struct tmio_mmc_host *host = mmc_priv(mmc);
@@ -726,6 +737,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,
 
 	/* SDR speeds are only available on Gen2+ */
 	if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) {
+		host->ops.init_card = renesas_sdhi_init_card;
+
 		/* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */
 		host->ops.card_busy = renesas_sdhi_card_busy;
 		host->ops.start_signal_voltage_switch =
-- 
2.7.4


  parent reply	other threads:[~2019-05-13  4:33 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-13  4:29 [PATCH v2 0/2] mmc: renesas_sdhi: improve performance by using IOMMU Yoshihiro Shimoda
2019-05-13  4:29 ` [PATCH v2 1/2] mmc: tmio: No memory size limitation if runs on IOMMU Yoshihiro Shimoda
2019-05-13  4:29 ` Yoshihiro Shimoda [this message]
2019-05-13  9:00   ` [PATCH v2 2/2] mmc: renesas_sdhi: use multiple segments if possible Wolfram Sang
2019-05-13  9:46     ` Yoshihiro Shimoda
2019-05-13 11:34       ` Yoshihiro Shimoda
2019-05-13 13:54         ` Wolfram Sang
2019-05-14  6:05       ` Yoshihiro Shimoda
2019-05-21 21:57         ` Wolfram Sang
2019-05-22  5:11           ` Yoshihiro Shimoda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557721744-30545-3-git-send-email-yoshihiro.shimoda.uh@renesas.com \
    --to=yoshihiro.shimoda.uh@renesas.com \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).