linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-pm@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Simon Horman <horms@verge.net.au>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH/RFT v3 1/3] thermal: rcar_gen3_thermal: Update value of Tj_1
Date: Tue, 14 May 2019 05:03:53 +0900	[thread overview]
Message-ID: <1557777835-19454-2-git-send-email-ykaneko0929@gmail.com> (raw)
In-Reply-To: <1557777835-19454-1-git-send-email-ykaneko0929@gmail.com>

As evaluation of hardware team, temperature calculation formula
of M3-W is difference from all other SoCs as below:
- M3-W: Tj_1: 116 (so Tj_1 - Tj_3 = 157)
- Others: Tj_1: 126 (so Tj_1 - Tj_3 = 167)

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
 drivers/thermal/rcar_gen3_thermal.c | 41 +++++++++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 11 deletions(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 88fa41c..265ff6d 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -124,11 +124,11 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
 #define RCAR3_THERMAL_GRAN 500 /* mili Celsius */
 
 /* no idea where these constants come from */
-#define TJ_1 116
 #define TJ_3 -41
 
 static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
-					 int *ptat, int *thcode)
+					 int *ptat, int *thcode,
+					 int ths_tj_1)
 {
 	int tj_2;
 
@@ -139,15 +139,15 @@ static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
 	 * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
 	 */
 	tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 157)
-		/ (ptat[0] - ptat[2])) - FIXPT_INT(41);
+		/ (ptat[0] - ptat[2])) + FIXPT_INT(TJ_3);
 
 	coef->a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]),
 			     tj_2 - FIXPT_INT(TJ_3));
 	coef->b1 = FIXPT_INT(thcode[2]) - coef->a1 * TJ_3;
 
 	coef->a2 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[0]),
-			     tj_2 - FIXPT_INT(TJ_1));
-	coef->b2 = FIXPT_INT(thcode[0]) - coef->a2 * TJ_1;
+			     tj_2 - FIXPT_INT(ths_tj_1));
+	coef->b2 = FIXPT_INT(thcode[0]) - coef->a2 * ths_tj_1;
 }
 
 static int rcar_gen3_thermal_round(int temp)
@@ -318,12 +318,29 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
 	usleep_range(1000, 2000);
 }
 
+static const int rcar_gen3_ths_tj_1 = 126;
+static const int rcar_gen3_ths_tj_1_m3_w = 116;
 static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
-	{ .compatible = "renesas,r8a774a1-thermal", },
-	{ .compatible = "renesas,r8a7795-thermal", },
-	{ .compatible = "renesas,r8a7796-thermal", },
-	{ .compatible = "renesas,r8a77965-thermal", },
-	{ .compatible = "renesas,r8a77980-thermal", },
+	{
+		.compatible = "renesas,r8a774a1-thermal",
+		.data = &rcar_gen3_ths_tj_1_m3_w,
+	},
+	{
+		.compatible = "renesas,r8a7795-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a7796-thermal",
+		.data = &rcar_gen3_ths_tj_1_m3_w,
+	},
+	{
+		.compatible = "renesas,r8a77965-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
+	{
+		.compatible = "renesas,r8a77980-thermal",
+		.data = &rcar_gen3_ths_tj_1,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
@@ -349,6 +366,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 {
 	struct rcar_gen3_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
+	const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev);
 	struct resource *res;
 	struct thermal_zone_device *zone;
 	int ret, irq, i;
@@ -422,7 +440,8 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		priv->tscs[i] = tsc;
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]);
+		rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i],
+					     *rcar_gen3_ths_tj_1);
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
 							    &rcar_gen3_tz_of_ops);
-- 
1.9.1


  reply	other threads:[~2019-05-13 20:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-13 20:03 [PATCH/RFT v3 0/3] thermal: rcar_gen3_thermal: Update calculation formula due to HW evaluation Yoshihiro Kaneko
2019-05-13 20:03 ` Yoshihiro Kaneko [this message]
2019-05-13 20:03 ` [PATCH/RFT v3 2/3] thermal: rcar_gen3_thermal: Update calculation formula of IRQTEMP Yoshihiro Kaneko
2019-05-13 20:03 ` [PATCH/RFT v3 3/3] thermal: rcar_gen3_thermal: Update temperature conversion method Yoshihiro Kaneko
2019-05-17 12:09 ` [PATCH/RFT v3 0/3] thermal: rcar_gen3_thermal: Update calculation formula due to HW evaluation Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1557777835-19454-2-git-send-email-ykaneko0929@gmail.com \
    --to=ykaneko0929@gmail.com \
    --cc=edubezval@gmail.com \
    --cc=horms@verge.net.au \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).