Linux-Renesas-SoC Archive on
 help / Atom feed
From: Fabrizio Castro <>
To: Simon Horman <>,
	Geert Uytterhoeven <>,
	Wolfgang Grandegger <>,
	Marc Kleine-Budde <>,
	Rob Herring <>,
	Mark Rutland <>
Cc: Fabrizio Castro <>,
	"David S. Miller" <>,,,,
	Chris Paterson <>,
	Biju Das <>,
Subject: [PATCH 2/6] dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM]
Date: Fri, 14 Jun 2019 12:53:30 +0100
Message-ID: <> (raw)
In-Reply-To: <>

Add missing RZ/G2[EM] CANFD clock specific documentation.

Fixes: 868b7c0f43e6 ("dt-bindings: can: rcar_can: Add r8a774a1 support")
Fixes: 0c11e7d0f51c ("dt-bindings: can: rcar_can: Add r8a774c0 support")
Signed-off-by: Fabrizio Castro <>
Reviewed-by: Chris Paterson <>
Hello Simon,

I think it would make more sense if this patch went through you as it
sits on series:

Do you think that's doable?


 Documentation/devicetree/bindings/net/can/rcar_can.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index b463e12..e1f315a 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -33,7 +33,7 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
-Required properties for R8A7795, R8A7796 and R8A77965:
+Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796 and R8A77965:
 For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
 be used by both CAN and CAN FD controller at the same time. It needs to be
 scaled to maximum frequency if any of these controllers use it. This is done

  parent reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-14 11:53 [PATCH 0/6] More CAN support for RZ/G2 devices Fabrizio Castro
2019-06-14 11:53 ` [PATCH 1/6] dt-bindings: can: rcar_canfd: document r8a774a1 support Fabrizio Castro
2019-06-17  9:30   ` Simon Horman
2019-06-14 11:53 ` Fabrizio Castro [this message]
2019-06-14 11:53 ` [PATCH 3/6] arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01] Fabrizio Castro
2019-06-14 11:53 ` [PATCH 4/6] arm64: dts: renesas: r8a774a1: " Fabrizio Castro
2019-06-14 11:53 ` [PATCH 5/6] arm64: dts: renesas: r8a774a1: Add CANFD support Fabrizio Castro
2019-06-14 11:53 ` [PATCH 6/6] arm64: dts: renesas: hihope-rzg2-ex: Enable CAN interfaces Fabrizio Castro

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on

Archives are clonable:
	git clone --mirror linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ \
	public-inbox-index linux-renesas-soc

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox