From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
Sam Ravnborg <sam@ravnborg.org>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
Jacopo Mondi <jacopo+renesas@jmondi.org>,
xu_shunji@hoperun.com, ebiharaml@si-linux.co.jp
Subject: [PATCH v2 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display
Date: Thu, 29 Aug 2019 12:38:33 +0100 [thread overview]
Message-ID: <1567078713-29361-3-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
In-Reply-To: <1567078713-29361-1-git-send-email-fabrizio.castro@bp.renesas.com>
The HiHope RZ/G2M is advertised as compatible with panel idk-1110wr
from Advantech, however the panel isn't sold alongside the board.
A new dts, adding everything that's required to get the panel to
work the HiHope RZ/G2M, is the most convenient way to support the
HiHope RZ/G2M when it's connected to the idk-1110wr.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
v1->v2:
* added space between lvds-connector-en-gpio and curly brace
arch/arm64/boot/dts/renesas/Makefile | 1 +
.../r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts | 86 ++++++++++++++++++++++
2 files changed, 87 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 42b74c2..5d94301 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
new file mode 100644
index 0000000..67fe04c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+
+/ {
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 50000>;
+
+ brightness-levels = <0 2 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ panel-lvds {
+ compatible = "advantech,idk-1110wr", "panel-lvds";
+
+ width-mm = <223>;
+ height-mm = <125>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1024x600 @60Hz */
+ clock-frequency = <51200000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hsync-len = <240>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ vfront-porch = <15>;
+ vback-porch = <10>;
+ vsync-len = <10>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&gpio1 {
+ /*
+ * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+ * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+ */
+ lvds-connector-en-gpio {
+ gpio-hog;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "lvds-connector-en-gpio";
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pfc {
+ pwm0_pins: pwm0 {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
--
2.7.4
next prev parent reply other threads:[~2019-08-29 11:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-29 11:38 [PATCH v2 0/2] Add LVDS panel support to HiHope RZ/G2M Fabrizio Castro
2019-08-29 11:38 ` [PATCH v2 1/2] dt-bindings: display: Add idk-1110wr binding Fabrizio Castro
2019-08-29 13:44 ` Rob Herring
2019-08-29 14:32 ` Laurent Pinchart
2019-08-29 11:38 ` Fabrizio Castro [this message]
2019-08-29 14:39 ` [PATCH v2 2/2] arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567078713-29361-3-git-send-email-fabrizio.castro@bp.renesas.com \
--to=fabrizio.castro@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=airlied@linux.ie \
--cc=biju.das@bp.renesas.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=ebiharaml@si-linux.co.jp \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=xu_shunji@hoperun.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).