From: Biju Das <biju.das@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Biju Das <biju.das@bp.renesas.com>,
Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Subject: [PATCH 2/5] arm64: dts: renesas: r8a774b1: Add SCIF and HSCIF nodes
Date: Mon, 23 Sep 2019 15:03:43 +0100 [thread overview]
Message-ID: <1569247426-28215-3-git-send-email-biju.das@bp.renesas.com> (raw)
In-Reply-To: <1569247426-28215-1-git-send-email-biju.das@bp.renesas.com>
Add the device nodes for RZ/G2N SCIF and HSCIF serial ports,
including clocks, power domains and DMAs.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 173 +++++++++++++++++++++++++++++-
1 file changed, 171 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 9102ae0..af1992c 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -237,8 +237,91 @@
};
hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a774b1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
reg = <0 0xe6540000 0 0x60>;
- /* placeholder */
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a774b1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a774b1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a774b1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a774b1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 0x60>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 516>;
+ status = "disabled";
};
hsusb: usb@e6590000 {
@@ -374,20 +457,106 @@
/* placeholder */
};
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a774b1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a774b1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a774b1",
"renesas,rcar-gen3-scif", "renesas,scif";
- reg = <0 0xe6e88000 0 64>;
+ reg = <0 0xe6e88000 0 0x40>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 310>,
<&cpg CPG_CORE R8A774B1_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+ <&dmac2 0x13>, <&dmac2 0x12>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a774b1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a774b1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a774b1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+ <&dmac2 0x5b>, <&dmac2 0x5a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
rcar_sound: sound@ec500000 {
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
--
2.7.4
next prev parent reply other threads:[~2019-09-23 14:04 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-23 14:03 [PATCH 0/5] Add RZ/G2N SYS-DMAC/SCIF/HSCIF/GPIO/EthernetAVB support Biju Das
2019-09-23 14:03 ` [PATCH 1/5] arm64: dts: renesas: r8a774b1: Add SYS-DMAC device nodes Biju Das
2019-09-23 14:03 ` Biju Das [this message]
2019-09-23 14:03 ` [PATCH 3/5] arm64: dts: renesas: r8a774b1: Add GPIO " Biju Das
2019-09-23 14:03 ` [PATCH 4/5] arm64: dts: renesas: r8a774b1: Add Ethernet AVB node Biju Das
2019-09-23 14:03 ` [PATCH 5/5] arm64: dts: renesas: Add HiHope RZ/G2N sub board support Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569247426-28215-3-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).