From: Biju Das <biju.das@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>
Cc: Biju Das <biju.das@bp.renesas.com>,
Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Subject: [PATCH v2 4/5] arm64: dts: renesas: r8a774b1: Add Ethernet AVB node
Date: Mon, 30 Sep 2019 09:18:46 +0100 [thread overview]
Message-ID: <1569831527-1250-5-git-send-email-biju.das@bp.renesas.com> (raw)
In-Reply-To: <1569831527-1250-1-git-send-email-biju.das@bp.renesas.com>
This patch adds the SoC specific part of the Ethernet AVB
device tree node.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
V1-->V2
* Fixed the conflict with latest devel branch.
---
arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 42 ++++++++++++++++++++++++++++++-
1 file changed, 41 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 641af27..f42f646 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -486,8 +486,48 @@
};
avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a774b1",
+ "renesas,etheravb-rcar-gen3";
reg = <0 0xe6800000 0 0x800>;
- /* placeholder */
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+ resets = <&cpg 812>;
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
can0: can@e6c30000 {
--
2.7.4
next prev parent reply other threads:[~2019-09-30 8:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-30 8:18 [PATCH v2 0/5] Add RZ/G2N SYS-DMAC/SCIF/HSCIF/GPIO/EthernetAVB support Biju Das
2019-09-30 8:18 ` [PATCH v2 1/5] arm64: dts: renesas: r8a774b1: Add SYS-DMAC device nodes Biju Das
2019-10-09 11:52 ` Geert Uytterhoeven
2019-09-30 8:18 ` [PATCH v2 2/5] arm64: dts: renesas: r8a774b1: Add SCIF and HSCIF nodes Biju Das
2019-10-09 11:57 ` Geert Uytterhoeven
2019-09-30 8:18 ` [PATCH v2 3/5] arm64: dts: renesas: r8a774b1: Add GPIO device nodes Biju Das
2019-10-09 12:03 ` Geert Uytterhoeven
2019-09-30 8:18 ` Biju Das [this message]
2019-10-09 12:04 ` [PATCH v2 4/5] arm64: dts: renesas: r8a774b1: Add Ethernet AVB node Geert Uytterhoeven
2019-09-30 8:18 ` [PATCH v2 5/5] arm64: dts: renesas: Add HiHope RZ/G2N sub board support Biju Das
2019-10-09 12:05 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569831527-1250-5-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).