linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
To: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>, Sean Paul <sean@poorly.run>,
	Andrzej Hajda <a.hajda@samsung.com>
Cc: Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Simon Horman <horms@verge.net.au>,
	Magnus Damm <magnus.damm@gmail.com>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Chris Paterson <Chris.Paterson2@renesas.com>,
	Biju Das <biju.das@bp.renesas.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	ebiharaml@si-linux.co.jp
Subject: [PATCH v4 7/7] arm64: dts: renesas: Add EK874 board with idk-2121wr display support
Date: Fri,  6 Dec 2019 16:32:54 +0000	[thread overview]
Message-ID: <1575649974-31472-8-git-send-email-fabrizio.castro@bp.renesas.com> (raw)
In-Reply-To: <1575649974-31472-1-git-send-email-fabrizio.castro@bp.renesas.com>

The EK874 is advertised as compatible with panel IDK-2121WR from
Advantech, however the panel isn't sold alongside the board.
A new dts, adding everything that's required to get the panel to
to work with the EK874, is the most convenient way to support the
EK874 when it's connected to the IDK-2121WR.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---
v3->v4:
* no change

v2->v3:
* removed renesas,swap-data property
* added dual-lvds-odd-pixels and dual-lvds-even-pixels properties

v1->v2:
* Added comment for lvds-connector-en-gpio
* Renamed &lvds0_panel_in to panel_in0
* Renamed &lvds1_panel_in to panel_in1
---
 arch/arm64/boot/dts/renesas/Makefile               |   3 +-
 .../boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts | 116 +++++++++++++++++++++
 2 files changed, 118 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 8fdbd22..2635799 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -3,7 +3,8 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
-dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
+			       r8a774c0-ek874-idk-2121wr.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
new file mode 100644
index 0000000..a7b27d0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
+ * connected to an Advantech IDK-2121WR 21.5" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-ek874.dts"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel-lvds {
+		compatible = "advantech,idk-2121wr", "panel-lvds";
+
+		width-mm = <476>;
+		height-mm = <268>;
+
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hsync-len = <44>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+		};
+	};
+};
+
+&gpio0 {
+	/*
+	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
+	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
+	 */
+	lvds-connector-en-gpio{
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in0>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in1>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
-- 
2.7.4


      parent reply	other threads:[~2019-12-06 16:33 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-06 16:32 [PATCH v4 0/7] Add dual-LVDS panel support to EK874 Fabrizio Castro
2019-12-06 16:32 ` [PATCH v4 1/7] drm: of: Add drm_of_lvds_get_dual_link_pixel_order Fabrizio Castro
2019-12-13 21:05   ` Laurent Pinchart
2019-12-16 17:52     ` Fabrizio Castro
2019-12-06 16:32 ` [PATCH v4 2/7] drm: rcar-du: lvds: Improve identification of panels Fabrizio Castro
2019-12-13 21:21   ` Laurent Pinchart
2019-12-16 18:00     ` Fabrizio Castro
2019-12-06 16:32 ` [PATCH v4 3/7] drm: rcar-du: lvds: Get dual link configuration from DT Fabrizio Castro
2019-12-13 21:30   ` Laurent Pinchart
2019-12-16 18:10     ` Fabrizio Castro
2019-12-06 16:32 ` [PATCH v4 4/7] drm: rcar-du: lvds: Allow for even and odd pixels swap Fabrizio Castro
2019-12-13 21:40   ` Laurent Pinchart
2019-12-16 18:36     ` Fabrizio Castro
2019-12-06 16:32 ` [PATCH v4 5/7] drm: rcar-du: lvds: Fix mode for companion encoder Fabrizio Castro
2019-12-13 21:41   ` Laurent Pinchart
2019-12-16 18:43     ` Fabrizio Castro
2019-12-06 16:32 ` [PATCH v4 6/7] dt-bindings: display: Add idk-2121wr binding Fabrizio Castro
2019-12-13 22:16   ` Laurent Pinchart
2019-12-06 16:32 ` Fabrizio Castro [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1575649974-31472-8-git-send-email-fabrizio.castro@bp.renesas.com \
    --to=fabrizio.castro@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=biju.das@bp.renesas.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=ebiharaml@si-linux.co.jp \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=mripard@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=sean@poorly.run \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).