* [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support
@ 2020-03-27 9:33 Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema Yoshihiro Shimoda
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Yoshihiro Shimoda @ 2020-03-27 9:33 UTC (permalink / raw)
To: kishon, robh+dt
Cc: linux-kernel, devicetree, linux-renesas-soc, Yoshihiro Shimoda
This patch adds USBPHY 2.0/3.0 devices support for r8a77961
(R-Car M3-W+).
Changes from v3:
- Retain a description of #phy-cell in patch 1/4.
- Add Reviewed-by in patch 1/4 and 3/4.
https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262507
Changes from v2:
- Modify json-schema files which Geert-san was pointed out.
https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261847
Changes from v1:
- Rebase these patches on top of my patches of convert bindings to
json-schema.
- Add Reviewed-by.
https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261195
Yoshihiro Shimoda (4):
dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 ------------
.../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 ---------
.../devicetree/bindings/phy/renesas,usb2-phy.yaml | 117 +++++++++++++++++++++
.../devicetree/bindings/phy/renesas,usb3-phy.yaml | 79 ++++++++++++++
4 files changed, 196 insertions(+), 122 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
--
2.7.4
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
2020-03-27 9:33 [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support Yoshihiro Shimoda
@ 2020-03-27 9:33 ` Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support Yoshihiro Shimoda
` (3 subsequent siblings)
4 siblings, 0 replies; 9+ messages in thread
From: Yoshihiro Shimoda @ 2020-03-27 9:33 UTC (permalink / raw)
To: kishon, robh+dt
Cc: linux-kernel, devicetree, linux-renesas-soc, Yoshihiro Shimoda
Convert Renesas R-Car generation 3 USB 2.0 PHY bindings documentation
to json-schema.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
.../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 -------------
.../devicetree/bindings/phy/renesas,usb2-phy.yaml | 116 +++++++++++++++++++++
2 files changed, 116 insertions(+), 70 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
deleted file mode 100644
index 7734b21..00000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Renesas R-Car generation 3 USB 2.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain.
-
-Required properties:
-- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210
- SoC.
- "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
- SoC.
- "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
- SoC.
- "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1
- SoC.
- "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
- SoC.
- "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
- SoC.
- "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
- SoC.
- "renesas,usb2-phy-r8a77965" if the device is a part of an
- R8A77965 SoC.
- "renesas,usb2-phy-r8a77990" if the device is a part of an
- R8A77990 SoC.
- "renesas,usb2-phy-r8a77995" if the device is a part of an
- R8A77995 SoC.
- "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or
- RZ/A2 compatible device.
-
- When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first
- followed by the generic version.
-
-- reg: offset and length of the partial USB 2.0 Host register block.
-- clocks: clock phandle and specifier pair(s).
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
- using <0> is deprecated).
-
-The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
-- 1 = USBH_INTA (OHCI)
-- 2 = USBH_INTB (EHCI)
-- 3 = UCOM_INT (OTG and BC)
-
-Optional properties:
-To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set interrupt properties to use the
-channel as USB OTG:
-- interrupts: interrupt specifier for the PHY.
-- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
- regulator will be managed during the PHY power on/off sequence.
-- renesas,no-otg-pins: boolean, specify when a board does not provide proper
- otg pins.
-- dr_mode: string, indicates the working mode for the PHY. Can be "host",
- "peripheral", or "otg". Should be set if otg controller is not used.
-
-
-Example (R-Car H3):
-
- usb-phy@ee080200 {
- compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
- reg = <0 0xee080200 0 0x700>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
- };
-
- usb-phy@ee0a0200 {
- compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
- reg = <0 0xee0a0200 0 0x700>;
- clocks = <&cpg CPG_MOD 702>;
- };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
new file mode 100644
index 00000000..7681e47
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 2.0 PHY
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+
+ - items:
+ - enum:
+ - renesas,usb2-phy-r7s9210 # RZ/A2
+ - renesas,usb2-phy-r8a774a1 # RZ/G2M
+ - renesas,usb2-phy-r8a774b1 # RZ/G2N
+ - renesas,usb2-phy-r8a774c0 # RZ/G2E
+ - renesas,usb2-phy-r8a7795 # R-Car H3
+ - renesas,usb2-phy-r8a7796 # R-Car M3-W
+ - renesas,usb2-phy-r8a77965 # R-Car M3-N
+ - renesas,usb2-phy-r8a77990 # R-Car E3
+ - renesas,usb2-phy-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-usb2-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: fck
+ - const: usb_x1
+
+ '#phy-cells':
+ enum: [0, 1] # and 0 is deprecated.
+ description: |
+ The phandle's argument in the PHY specifier is the INT_STATUS bit of
+ controller.
+ - 1 = USBH_INTA (OHCI)
+ - 2 = USBH_INTB (EHCI)
+ - 3 = UCOM_INT (OTG and BC)
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: reset of USB 2.0 host side
+ - description: reset of USB 2.0 peripheral side
+
+ vbus-supply:
+ description: |
+ Phandle to a regulator that provides power to the VBUS. This regulator
+ will be managed during the PHY power on/off sequence.
+
+ renesas,no-otg-pins:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ specify when a board does not provide proper otg pins.
+
+ dr_mode: true
+
+if:
+ properties:
+ compatible:
+ items:
+ enum:
+ - renesas,usb2-phy-r7s9210
+then:
+ required:
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+ reg = <0xee080200 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ #phy-cells = <1>;
+ };
+
+ usb-phy@ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+ reg = <0xee0a0200 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ #phy-cells = <1>;
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
2020-03-27 9:33 [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema Yoshihiro Shimoda
@ 2020-03-27 9:33 ` Yoshihiro Shimoda
2020-04-05 1:46 ` Rob Herring
2020-03-27 9:33 ` [PATCH v4 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema Yoshihiro Shimoda
` (2 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Yoshihiro Shimoda @ 2020-03-27 9:33 UTC (permalink / raw)
To: kishon, robh+dt
Cc: linux-kernel, devicetree, linux-renesas-soc, Yoshihiro Shimoda
This patch adds support for r8a77961 (R-Car M3-W+).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index 7681e47..440f09f 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -23,6 +23,7 @@ properties:
- renesas,usb2-phy-r8a774c0 # RZ/G2E
- renesas,usb2-phy-r8a7795 # R-Car H3
- renesas,usb2-phy-r8a7796 # R-Car M3-W
+ - renesas,usb2-phy-r8a77961 # R-Car M3-W+
- renesas,usb2-phy-r8a77965 # R-Car M3-N
- renesas,usb2-phy-r8a77990 # R-Car E3
- renesas,usb2-phy-r8a77995 # R-Car D3
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v4 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
2020-03-27 9:33 [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support Yoshihiro Shimoda
@ 2020-03-27 9:33 ` Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support Yoshihiro Shimoda
2020-05-14 9:26 ` [PATCH v4 0/4] dt-bindings: phy: " Yoshihiro Shimoda
4 siblings, 0 replies; 9+ messages in thread
From: Yoshihiro Shimoda @ 2020-03-27 9:33 UTC (permalink / raw)
To: kishon, robh+dt
Cc: linux-kernel, devicetree, linux-renesas-soc, Yoshihiro Shimoda
Convert Renesas R-Car generation 3 USB 3.0 PHY bindings documentation
to json-schema.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
.../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 ---------------
.../devicetree/bindings/phy/renesas,usb3-phy.yaml | 78 ++++++++++++++++++++++
2 files changed, 78 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
deleted file mode 100644
index 0fe433b..00000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Renesas R-Car generation 3 USB 3.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 3.0 PHY contain.
-If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
-instead of USB3_CLK. However, if you don't want to these features, you don't
-need this driver.
-
-Required properties:
-- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
- SoC.
- "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
- SoC.
- "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
- SoC.
- "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
- SoC.
- "renesas,r8a77965-usb3-phy" if the device is a part of an
- R8A77965 SoC.
- "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
- compatible device.
-
- When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first
- followed by the generic version.
-
-- reg: offset and length of the USB 3.0 PHY register block.
-- clocks: A list of phandles and clock-specifier pairs.
-- clock-names: Name of the clocks.
- - The funcional clock must be "usb3-if".
- - The usb3's external clock must be "usb3s_clk".
- - The usb2's external clock must be "usb_extal". If you want to use the ssc,
- the clock-frequency must not be 0.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Optional properties:
-- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
- the following values as u32:
- - 0 (or the property doesn't exist): disable the ssc
- - 4980: enable the ssc as -4980 ppm
- - 4492: enable the ssc as -4492 ppm
- - 4003: enable the ssc as -4003 ppm
-
-Example (R-Car H3):
-
- usb-phy@e65ee000 {
- compatible = "renesas,r8a7795-usb3-phy",
- "renesas,rcar-gen3-usb3-phy";
- reg = <0 0xe65ee000 0 0x90>;
- clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
- clock-names = "usb3-if", "usb3s_clk", "usb_extal";
- };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
new file mode 100644
index 00000000..edd5417
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 3.0 PHY
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a774a1-usb3-phy # RZ/G2M
+ - renesas,r8a774b1-usb3-phy # RZ/G2N
+ - renesas,r8a7795-usb3-phy # R-Car H3
+ - renesas,r8a7796-usb3-phy # R-Car M3-W
+ - renesas,r8a77965-usb3-phy # R-Car M3-N
+ - const: renesas,rcar-gen3-usb3-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ # If you want to use the ssc, the clock-frequency of usb_extal
+ # must not be 0.
+ minItems: 2
+ maxItems: 3
+ items:
+ - const: usb3-if # The funcional clock
+ - const: usb3s_clk # The usb3's external clock
+ - const: usb_extal # The usb2's external clock
+
+ '#phy-cells':
+ # see phy-bindings.txt in the same directory
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ renesas,ssc-range:
+ description: |
+ Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
+ exist means disabling the ssc. The actual value will be -<value> ppm.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [ 0, 4003, 4492, 4980 ]
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ usb-phy@e65ee000 {
+ compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
+ reg = <0xe65ee000 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ #phy-cells = <0>;
+ };
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
2020-03-27 9:33 [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support Yoshihiro Shimoda
` (2 preceding siblings ...)
2020-03-27 9:33 ` [PATCH v4 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema Yoshihiro Shimoda
@ 2020-03-27 9:33 ` Yoshihiro Shimoda
2020-04-05 1:46 ` Rob Herring
2020-05-14 9:26 ` [PATCH v4 0/4] dt-bindings: phy: " Yoshihiro Shimoda
4 siblings, 1 reply; 9+ messages in thread
From: Yoshihiro Shimoda @ 2020-03-27 9:33 UTC (permalink / raw)
To: kishon, robh+dt
Cc: linux-kernel, devicetree, linux-renesas-soc, Yoshihiro Shimoda
This patch adds support for r8a77961 (R-Car M3-W+).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
index edd5417..f459eaf 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -17,6 +17,7 @@ properties:
- renesas,r8a774b1-usb3-phy # RZ/G2N
- renesas,r8a7795-usb3-phy # R-Car H3
- renesas,r8a7796-usb3-phy # R-Car M3-W
+ - renesas,r8a77961-usb3-phy # R-Car M3-W+
- renesas,r8a77965-usb3-phy # R-Car M3-N
- const: renesas,rcar-gen3-usb3-phy
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
2020-03-27 9:33 ` [PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support Yoshihiro Shimoda
@ 2020-04-05 1:46 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2020-04-05 1:46 UTC (permalink / raw)
To: Yoshihiro Shimoda
Cc: kishon, robh+dt, linux-kernel, devicetree, linux-renesas-soc,
Yoshihiro Shimoda
On Fri, 27 Mar 2020 18:33:54 +0900, Yoshihiro Shimoda wrote:
> This patch adds support for r8a77961 (R-Car M3-W+).
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
2020-03-27 9:33 ` [PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support Yoshihiro Shimoda
@ 2020-04-05 1:46 ` Rob Herring
0 siblings, 0 replies; 9+ messages in thread
From: Rob Herring @ 2020-04-05 1:46 UTC (permalink / raw)
To: Yoshihiro Shimoda
Cc: kishon, robh+dt, linux-kernel, devicetree, linux-renesas-soc,
Yoshihiro Shimoda
On Fri, 27 Mar 2020 18:33:56 +0900, Yoshihiro Shimoda wrote:
> This patch adds support for r8a77961 (R-Car M3-W+).
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support
2020-03-27 9:33 [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support Yoshihiro Shimoda
` (3 preceding siblings ...)
2020-03-27 9:33 ` [PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support Yoshihiro Shimoda
@ 2020-05-14 9:26 ` Yoshihiro Shimoda
2020-05-18 12:29 ` Kishon Vijay Abraham I
4 siblings, 1 reply; 9+ messages in thread
From: Yoshihiro Shimoda @ 2020-05-14 9:26 UTC (permalink / raw)
To: kishon, robh+dt; +Cc: linux-kernel, devicetree, linux-renesas-soc
Hi Kishon,
> From: Yoshihiro Shimoda, Sent: Friday, March 27, 2020 6:34 PM
>
> This patch adds USBPHY 2.0/3.0 devices support for r8a77961
> (R-Car M3-W+).
Would you apply this patch series to your repository?
Or, should I resend?
JFYI:
https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262633
Best regards,
Yoshihiro Shimoda
> Changes from v3:
> - Retain a description of #phy-cell in patch 1/4.
> - Add Reviewed-by in patch 1/4 and 3/4.
> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262507
>
> Changes from v2:
> - Modify json-schema files which Geert-san was pointed out.
> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261847
>
> Changes from v1:
> - Rebase these patches on top of my patches of convert bindings to
> json-schema.
> - Add Reviewed-by.
> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261195
>
> Yoshihiro Shimoda (4):
> dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
> dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
> dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
> dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
>
> .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 ------------
> .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 ---------
> .../devicetree/bindings/phy/renesas,usb2-phy.yaml | 117 +++++++++++++++++++++
> .../devicetree/bindings/phy/renesas,usb3-phy.yaml | 79 ++++++++++++++
> 4 files changed, 196 insertions(+), 122 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
> create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
> create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
>
> --
> 2.7.4
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support
2020-05-14 9:26 ` [PATCH v4 0/4] dt-bindings: phy: " Yoshihiro Shimoda
@ 2020-05-18 12:29 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 9+ messages in thread
From: Kishon Vijay Abraham I @ 2020-05-18 12:29 UTC (permalink / raw)
To: Yoshihiro Shimoda, robh+dt
Cc: linux-kernel, devicetree, linux-renesas-soc, Vinod Koul
On 5/14/2020 2:56 PM, Yoshihiro Shimoda wrote:
> Hi Kishon,
>
>> From: Yoshihiro Shimoda, Sent: Friday, March 27, 2020 6:34 PM
>>
>> This patch adds USBPHY 2.0/3.0 devices support for r8a77961
>> (R-Car M3-W+).
>
> Would you apply this patch series to your repository?
> Or, should I resend?
>
> JFYI:
> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262633
merged them now, thanks!
-Kishon
>
> Best regards,
> Yoshihiro Shimoda
>
>> Changes from v3:
>> - Retain a description of #phy-cell in patch 1/4.
>> - Add Reviewed-by in patch 1/4 and 3/4.
>> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=262507
>>
>> Changes from v2:
>> - Modify json-schema files which Geert-san was pointed out.
>> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261847
>>
>> Changes from v1:
>> - Rebase these patches on top of my patches of convert bindings to
>> json-schema.
>> - Add Reviewed-by.
>> https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=261195
>>
>> Yoshihiro Shimoda (4):
>> dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
>> dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
>> dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
>> dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
>>
>> .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 70 ------------
>> .../devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 52 ---------
>> .../devicetree/bindings/phy/renesas,usb2-phy.yaml | 117 +++++++++++++++++++++
>> .../devicetree/bindings/phy/renesas,usb3-phy.yaml | 79 ++++++++++++++
>> 4 files changed, 196 insertions(+), 122 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
>> delete mode 100644 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
>> create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
>> create mode 100644 Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
>>
>> --
>> 2.7.4
>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-05-18 12:29 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-27 9:33 [PATCH v4 0/4] dt-bindings: phy: add r8a77961 support Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 1/4] dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 2/4] dt-bindings: phy: renesas: usb2-phy: add r8a77961 support Yoshihiro Shimoda
2020-04-05 1:46 ` Rob Herring
2020-03-27 9:33 ` [PATCH v4 3/4] dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema Yoshihiro Shimoda
2020-03-27 9:33 ` [PATCH v4 4/4] dt-bindings: phy: renesas: usb3-phy: add r8a77961 support Yoshihiro Shimoda
2020-04-05 1:46 ` Rob Herring
2020-05-14 9:26 ` [PATCH v4 0/4] dt-bindings: phy: " Yoshihiro Shimoda
2020-05-18 12:29 ` Kishon Vijay Abraham I
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).