linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Benoit Parrot <bparrot@ti.com>,
	linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 15/30] media: entity: Look for indirect routes
Date: Fri,  2 Nov 2018 00:31:29 +0100	[thread overview]
Message-ID: <20181101233144.31507-16-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20181101233144.31507-1-niklas.soderlund+renesas@ragnatech.se>

From: Sakari Ailus <sakari.ailus@linux.intel.com>

Two pads are considered having an active route for the purpose of
has_route() if an indirect active route can be found between the two pads.
An simple example of this is that a source pad has an active route to
another source pad if both of the pads have an active route to the same
sink pad.

Make media_entity_has_route() return true in that case, and do not rely on
drivers performing this by themselves.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 drivers/media/media-entity.c | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 42977634d7102852..e45fc2549017615a 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -240,6 +240,9 @@ EXPORT_SYMBOL_GPL(media_entity_pads_init);
 bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
 			    unsigned int pad1)
 {
+	unsigned int i;
+	bool has_route;
+
 	if (pad0 >= entity->num_pads || pad1 >= entity->num_pads)
 		return false;
 
@@ -253,7 +256,34 @@ bool media_entity_has_route(struct media_entity *entity, unsigned int pad0,
 	    && entity->pads[pad1].flags & MEDIA_PAD_FL_SINK)
 		swap(pad0, pad1);
 
-	return entity->ops->has_route(entity, pad0, pad1);
+	has_route = entity->ops->has_route(entity, pad0, pad1);
+	/* A direct route is returned immediately */
+	if (has_route ||
+	    (entity->pads[pad0].flags & MEDIA_PAD_FL_SINK &&
+	     entity->pads[pad1].flags & MEDIA_PAD_FL_SOURCE))
+		return true;
+
+	/* Look for indirect routes */
+	for (i = 0; i < entity->num_pads; i++) {
+		if (i == pad0 || i == pad1)
+			continue;
+
+		/*
+		 * There are no direct routes between same types of
+		 * pads, so skip checking this route
+		 */
+		if (!((entity->pads[pad0].flags ^ entity->pads[i].flags) &
+		      (MEDIA_PAD_FL_SOURCE | MEDIA_PAD_FL_SINK)))
+			continue;
+
+		/* Is there an indirect route? */
+		if (entity->ops->has_route(entity, i, pad0) &&
+		    entity->ops->has_route(entity, i, pad1))
+			return true;
+	}
+
+	return false;
+
 }
 EXPORT_SYMBOL_GPL(media_entity_has_route);
 
-- 
2.19.1

  parent reply	other threads:[~2018-11-01 23:31 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 23:31 [PATCH v2 00/30] v4l: add support for multiplexed streams Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk Niklas Söderlund
2019-01-15 21:43   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
2019-01-15 22:03   ` Laurent Pinchart
2019-01-15 22:13     ` Sakari Ailus
2019-01-15 22:07   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
2019-01-15 22:21   ` Laurent Pinchart
     [not found]     ` <20190115223406.mxgzl36cp54gb7nv@kekkonen.localdomain>
2019-01-15 23:28       ` Laurent Pinchart
2019-01-22 14:50         ` Sakari Ailus
2019-02-14 15:15   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
2019-01-15 22:24   ` Laurent Pinchart
2019-01-15 22:36     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
2019-01-15 22:38   ` Laurent Pinchart
2019-01-15 22:48     ` Sakari Ailus
2019-02-14 15:53   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
2019-01-15 22:54   ` Laurent Pinchart
2019-01-22 15:31     ` Sakari Ailus
2019-01-22 15:37       ` Laurent Pinchart
2019-01-22 16:16         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 07/30] media: entity: Add has_route entity operation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 08/30] media: entity: Add media_has_route() function Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
2019-01-15 22:57   ` Laurent Pinchart
2019-01-22 15:15     ` Sakari Ailus
2019-01-22 15:20       ` Laurent Pinchart
2019-02-18  9:21         ` Jacopo Mondi
2019-02-22 12:18           ` Laurent Pinchart
2019-03-04 12:35             ` Jacopo Mondi
2019-03-05 20:04               ` Laurent Pinchart
2019-03-06  8:29                 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
2019-01-15 23:13   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
2019-01-15 23:24   ` Laurent Pinchart
2019-01-22 15:36     ` Sakari Ailus
2019-01-22 15:38       ` Laurent Pinchart
2019-01-22 16:21         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
2019-01-15 23:33   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
2019-01-15 23:35   ` Laurent Pinchart
2019-01-22 15:38     ` Sakari Ailus
2018-11-01 23:31 ` Niklas Söderlund [this message]
2019-01-15 23:41   ` [PATCH v2 15/30] media: entity: Look for indirect routes Laurent Pinchart
2019-01-22 15:56     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
2019-01-15 23:51   ` Laurent Pinchart
2019-01-22 16:14     ` Sakari Ailus
2019-01-22 17:00       ` Laurent Pinchart
2019-02-21 14:59     ` Jacopo Mondi
2019-02-21 23:49       ` Sakari Ailus
2019-02-22  8:46         ` Jacopo Mondi
2019-02-21 14:39   ` Jacopo Mondi
2019-02-21 22:31     ` Sakari Ailus
2019-02-22  8:40       ` Jacopo Mondi
2019-02-22 11:04         ` Sakari Ailus
2019-02-22 11:17           ` Jacopo Mondi
2019-02-22 11:29             ` Sakari Ailus
2019-02-22 13:37               ` Ian Arkver
2019-02-22 13:50               ` Geert Uytterhoeven
2018-11-01 23:31 ` [PATCH v2 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
2019-01-08 10:04   ` Geert Uytterhoeven
2019-01-15 23:53   ` Laurent Pinchart
2019-01-22 15:57     ` Sakari Ailus
2019-02-18 11:21     ` Jacopo Mondi
2019-02-21 23:50       ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
2019-02-21 14:18   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 28/30] adv748x: afe: add routing support Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing Niklas Söderlund
2018-11-14 13:10   ` Nikita Yushchenko
2018-11-14 19:45     ` Niklas Söderlund
2018-12-03 22:16 ` [PATCH v2 00/30] v4l: add support for multiplexed streams Sakari Ailus
2018-12-05 22:09   ` Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101233144.31507-16-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=bparrot@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).