From: Kieran Bingham <kieran.bingham@ideasonboard.com>
To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, sakari.ailus@iki.fi
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Jacopo Mondi" <jacopo@jmondi.org>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
linux-kernel@vger.kernel.org,
"Kieran Bingham" <kieran.bingham@ideasonboard.com>
Subject: [PATCH v4 0/4] MAX9286 GMSL Support
Date: Fri, 2 Nov 2018 15:47:19 +0000 [thread overview]
Message-ID: <20181102154723.23662-1-kieran.bingham@ideasonboard.com> (raw)
This series provides a pair of drivers for GMSL cameras on the R-Car
ADAS platforms.
These drivers originate from Cogent Embedded, and have been refactored
to split the MAX9286 away from the RDACM20 drivers which were once very
tightly coupled.
This posting is the culmination of ~100 changesets spread across Jacopo,
Niklas, Laurent and myself - thus they contain all of our SoB tags.
This series makes use of Sakari's VC developments and is based upon the
most recent rebase of this series by Niklas at:
git://git.ragnatech.se/linux/ v4l2/mux
Thanks to the VC developments, this driver is capable of streaming from
all 4 input ports simultaneously through the RCar-VIN capture system.
This driver along with the associated platform support for the Renesas
R-Car Salvator-X, and the Eagle-V3M can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/kbingham/rcar.git gmsl/v4
Further anticipated work in this area includes supporting the RDACM21
camera, at which point the RDACM20 will be adapted to separate out the
MAX9271 and the OV10635 sensor components.
Jacopo Mondi (1):
dt-bindings: media: i2c: Add bindings for IMI RDACM20
Kieran Bingham (2):
media: i2c: Add MAX9286 driver
media: i2c: Add RDACM20 driver
Laurent Pinchart (1):
dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286
.../bindings/media/i2c/imi,rdacm20.txt | 65 +
.../bindings/media/i2c/maxim,max9286.txt | 182 +++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 20 +
drivers/media/i2c/Kconfig | 22 +
drivers/media/i2c/Makefile | 2 +
drivers/media/i2c/max9286.c | 1189 +++++++++++++++++
drivers/media/i2c/rdacm20-ov10635.h | 953 +++++++++++++
drivers/media/i2c/rdacm20.c | 635 +++++++++
9 files changed, 3069 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imi,rdacm20.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max9286.txt
create mode 100644 drivers/media/i2c/max9286.c
create mode 100644 drivers/media/i2c/rdacm20-ov10635.h
create mode 100644 drivers/media/i2c/rdacm20.c
--
2.17.1
next reply other threads:[~2018-11-02 15:47 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 15:47 Kieran Bingham [this message]
2018-11-02 15:47 ` [PATCH v4 1/4] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286 Kieran Bingham
2018-11-05 20:02 ` Rob Herring
2018-11-13 22:42 ` Luca Ceresoli
2018-11-13 23:12 ` Kieran Bingham
2018-11-14 10:04 ` Luca Ceresoli
2018-11-27 22:47 ` Kieran Bingham
2018-12-01 18:41 ` Luca Ceresoli
2018-11-02 15:47 ` [PATCH v4 2/4] dt-bindings: media: i2c: Add bindings for IMI RDACM20 Kieran Bingham
2018-11-05 20:13 ` Rob Herring
2018-11-02 15:47 ` [PATCH v4 3/4] media: i2c: Add MAX9286 driver Kieran Bingham
2018-11-07 15:06 ` Kieran Bingham
2018-11-07 17:24 ` Luca Ceresoli
2018-11-08 10:11 ` jacopo mondi
2018-11-08 11:24 ` Luca Ceresoli
2018-11-13 22:49 ` Luca Ceresoli
2018-11-14 0:46 ` Kieran Bingham
2018-11-14 10:04 ` Luca Ceresoli
2018-11-20 0:32 ` Kieran Bingham
2018-11-20 10:51 ` Luca Ceresoli
2018-11-20 17:44 ` jacopo mondi
2018-11-21 10:05 ` Luca Ceresoli
2018-11-02 15:47 ` [PATCH v4 4/4] media: i2c: Add RDACM20 driver Kieran Bingham
2018-11-20 8:34 ` Sakari Ailus
2018-11-28 12:51 ` Kieran Bingham
2018-12-20 23:11 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181102154723.23662-1-kieran.bingham@ideasonboard.com \
--to=kieran.bingham@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=jacopo@jmondi.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).