Linux-Renesas-SoC Archive on lore.kernel.org
 help / color / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Benoit Parrot <bparrot@ti.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing
Date: Wed, 14 Nov 2018 20:45:23 +0100
Message-ID: <20181114194523.GE6901@bigcity.dyn.berto.se> (raw)
In-Reply-To: <aae0c45f-4c22-d463-1f1f-36e368d96bc5@cogentembedded.com>

Hi Nikita,

Thanks for your feedback.

On 2018-11-14 16:10:37 +0300, Nikita Yushchenko wrote:
> > +	for (i = 0; i < fd.num_entries; i++) {
> > +		struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
> > +		int source_pad;
> > +
> > +		source_pad = rcsi2_vc_to_pad(entry->bus.csi2.channel);
> > +		if (source_pad < 0) {
> > +			dev_err(priv->dev, "Virtual Channel out of range: %u\n",
> > +				entry->bus.csi2.channel);
> > +			return -ENOSPC;
> 
> Why -ENOSPC here?
> 
> AFAIU negative source_pad here means driver internal error (frame desc
> returned from rcsi2_get_remote_frame_desc() is invalid).  Then I think
> error return should be -EIO.

Wops, I agree with you this should not be -ENOSPC. Looking at the code 
this seems I just reused the same error code as if there is no space in 
the routes array check above this chunk, my bad. I will fix this for the 
next version.

-- 
Regards,
Niklas S�derlund

  reply index

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 23:31 [PATCH v2 00/30] v4l: add support for multiplexed streams Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk Niklas Söderlund
2019-01-15 21:43   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
2019-01-15 22:03   ` Laurent Pinchart
2019-01-15 22:13     ` Sakari Ailus
2019-01-15 22:07   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
2019-01-15 22:21   ` Laurent Pinchart
     [not found]     ` <20190115223406.mxgzl36cp54gb7nv@kekkonen.localdomain>
2019-01-15 23:28       ` Laurent Pinchart
2019-01-22 14:50         ` Sakari Ailus
2019-02-14 15:15   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
2019-01-15 22:24   ` Laurent Pinchart
2019-01-15 22:36     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
2019-01-15 22:38   ` Laurent Pinchart
2019-01-15 22:48     ` Sakari Ailus
2019-02-14 15:53   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
2019-01-15 22:54   ` Laurent Pinchart
2019-01-22 15:31     ` Sakari Ailus
2019-01-22 15:37       ` Laurent Pinchart
2019-01-22 16:16         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 07/30] media: entity: Add has_route entity operation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 08/30] media: entity: Add media_has_route() function Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
2019-01-15 22:57   ` Laurent Pinchart
2019-01-22 15:15     ` Sakari Ailus
2019-01-22 15:20       ` Laurent Pinchart
2019-02-18  9:21         ` Jacopo Mondi
2019-02-22 12:18           ` Laurent Pinchart
2019-03-04 12:35             ` Jacopo Mondi
2019-03-05 20:04               ` Laurent Pinchart
2019-03-06  8:29                 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
2019-01-15 23:13   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
2019-01-15 23:24   ` Laurent Pinchart
2019-01-22 15:36     ` Sakari Ailus
2019-01-22 15:38       ` Laurent Pinchart
2019-01-22 16:21         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
2019-01-15 23:33   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
2019-01-15 23:35   ` Laurent Pinchart
2019-01-22 15:38     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 15/30] media: entity: Look for indirect routes Niklas Söderlund
2019-01-15 23:41   ` Laurent Pinchart
2019-01-22 15:56     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
2019-01-15 23:51   ` Laurent Pinchart
2019-01-22 16:14     ` Sakari Ailus
2019-01-22 17:00       ` Laurent Pinchart
2019-02-21 14:59     ` Jacopo Mondi
2019-02-21 23:49       ` Sakari Ailus
2019-02-22  8:46         ` Jacopo Mondi
2019-02-21 14:39   ` Jacopo Mondi
2019-02-21 22:31     ` Sakari Ailus
2019-02-22  8:40       ` Jacopo Mondi
2019-02-22 11:04         ` Sakari Ailus
2019-02-22 11:17           ` Jacopo Mondi
2019-02-22 11:29             ` Sakari Ailus
2019-02-22 13:37               ` Ian Arkver
2019-02-22 13:50               ` Geert Uytterhoeven
2018-11-01 23:31 ` [PATCH v2 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
2019-01-08 10:04   ` Geert Uytterhoeven
2019-01-15 23:53   ` Laurent Pinchart
2019-01-22 15:57     ` Sakari Ailus
2019-02-18 11:21     ` Jacopo Mondi
2019-02-21 23:50       ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
2019-02-21 14:18   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 28/30] adv748x: afe: add routing support Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing Niklas Söderlund
2018-11-14 13:10   ` Nikita Yushchenko
2018-11-14 19:45     ` Niklas Söderlund [this message]
2018-12-03 22:16 ` [PATCH v2 00/30] v4l: add support for multiplexed streams Sakari Ailus
2018-12-05 22:09   ` Niklas Söderlund

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181114194523.GE6901@bigcity.dyn.berto.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=bparrot@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=nikita.yoush@cogentembedded.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-renesas-soc/0 linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ https://lore.kernel.org/linux-renesas-soc \
		linux-renesas-soc@vger.kernel.org linux-renesas-soc@archiver.kernel.org
	public-inbox-index linux-renesas-soc


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-renesas-soc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox