linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: laurent.pinchart@ideasonboard.com,
	niklas.soderlund+renesas@ragnatech.se,
	kieran.bingham@ideasonboard.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 5/6] media: adv748x: Store the TX sink in HDMI/AFE
Date: Sun,  6 Jan 2019 16:54:12 +0100	[thread overview]
Message-ID: <20190106155413.30666-6-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20190106155413.30666-1-jacopo+renesas@jmondi.org>

Both the AFE and HDMI s_stream routines (adv748x_afe_s_stream() and
adv748x_hdmi_s_stream()) have to enable the CSI-2 TX they are streaming video
data to.

With the introduction of dynamic routing between HDMI and AFE entities to
TXA, the video stream sink needs to be set at run time, and not statically
selected as the s_stream functions are currently doing.

To fix this, store a reference to the active CSI-2 TX sink for both HDMI and
AFE sources, and operate on it when starting/stopping the stream.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/adv748x/adv748x-afe.c  |  2 +-
 drivers/media/i2c/adv748x/adv748x-csi2.c | 15 +++++++++++++--
 drivers/media/i2c/adv748x/adv748x-hdmi.c |  2 +-
 drivers/media/i2c/adv748x/adv748x.h      |  4 ++++
 4 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
index 71714634efb0..dbbb1e4d6363 100644
--- a/drivers/media/i2c/adv748x/adv748x-afe.c
+++ b/drivers/media/i2c/adv748x/adv748x-afe.c
@@ -282,7 +282,7 @@ static int adv748x_afe_s_stream(struct v4l2_subdev *sd, int enable)
 			goto unlock;
 	}
 
-	ret = adv748x_tx_power(&state->txb, enable);
+	ret = adv748x_tx_power(afe->tx, enable);
 	if (ret)
 		goto unlock;
 
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index de3944615e64..c835f6379337 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -88,14 +88,25 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
 						 is_txb(tx));
 		if (ret)
 			return ret;
+
+		/* TXB can output AFE signals only. */
+		if (is_txb(tx))
+			state->afe.tx = tx;
 	}
 
 	/* Register link to HDMI for TXA only. */
 	if (is_txb(tx) || !is_hdmi_enabled(state))
 		return 0;
 
-	return adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
-					  ADV748X_HDMI_SOURCE, true);
+	ret = adv748x_csi2_register_link(tx, sd->v4l2_dev, &state->hdmi.sd,
+					 ADV748X_HDMI_SOURCE, true);
+	if (ret)
+		return ret;
+
+	/* The default HDMI output is TXA. */
+	state->hdmi.tx = tx;
+
+	return 0;
 }
 
 static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c b/drivers/media/i2c/adv748x/adv748x-hdmi.c
index 35d027941482..c557f8fdf11a 100644
--- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
+++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
@@ -358,7 +358,7 @@ static int adv748x_hdmi_s_stream(struct v4l2_subdev *sd, int enable)
 
 	mutex_lock(&state->mutex);
 
-	ret = adv748x_tx_power(&state->txa, enable);
+	ret = adv748x_tx_power(hdmi->tx, enable);
 	if (ret)
 		goto done;
 
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index d8d94053301b..6eb2e4a95eed 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -122,6 +122,8 @@ struct adv748x_hdmi {
 	struct v4l2_dv_timings timings;
 	struct v4l2_fract aspect_ratio;
 
+	struct adv748x_csi2 *tx;
+
 	struct {
 		u8 edid[512];
 		u32 present;
@@ -152,6 +154,8 @@ struct adv748x_afe {
 	struct v4l2_subdev sd;
 	struct v4l2_mbus_framefmt format;
 
+	struct adv748x_csi2 *tx;
+
 	bool streaming;
 	v4l2_std_id curr_norm;
 	unsigned int input;
-- 
2.20.1


  parent reply	other threads:[~2019-01-06 15:54 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-06 15:54 [PATCH v2 0/6] media: adv748x: Implement dynamic routing support Jacopo Mondi
2019-01-06 15:54 ` [PATCH v2 1/6] media: adv748x: Add is_txb() Jacopo Mondi
2019-01-07  9:49   ` Kieran Bingham
2019-01-07 10:05     ` Jacopo Mondi
2019-01-07 10:38       ` Kieran Bingham
2019-01-09  0:04         ` Laurent Pinchart
2019-01-06 15:54 ` [PATCH v2 2/6] media: adv748x: Rename reset procedures Jacopo Mondi
2019-01-07  9:59   ` Kieran Bingham
2019-01-06 15:54 ` [PATCH v2 3/6] media: adv748x: csi2: Link AFE with TXA and TXB Jacopo Mondi
2019-01-07 10:35   ` Kieran Bingham
2019-01-09  0:11   ` Laurent Pinchart
2019-01-06 15:54 ` [PATCH v2 4/6] media: adv748x: Store the source subdevice in TX Jacopo Mondi
2019-01-07 10:41   ` Kieran Bingham
2019-01-06 15:54 ` Jacopo Mondi [this message]
2019-01-07 10:45   ` [PATCH v2 5/6] media: adv748x: Store the TX sink in HDMI/AFE Kieran Bingham
2019-01-06 15:54 ` [PATCH v2 6/6] media: adv748x: Implement TX link_setup callback Jacopo Mondi
2019-01-07 12:36   ` Kieran Bingham
2019-01-09  0:15     ` Laurent Pinchart
2019-01-09 14:15       ` Kieran Bingham
2019-01-10  8:58         ` Jacopo Mondi
2019-01-10 10:05           ` Kieran Bingham
2019-01-10  8:51       ` Jacopo Mondi
2019-01-10  9:27         ` Laurent Pinchart
2019-01-09 14:17     ` Kieran Bingham
2019-01-10 10:01     ` Jacopo Mondi
2019-01-10 13:40     ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190106155413.30666-6-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).