From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: laurent.pinchart@ideasonboard.com,
kieran.bingham@ideasonboard.com, linux-media@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Subject: Re: [PATCH v3 4/6] media: adv748x: Store the source subdevice in TX
Date: Wed, 16 Jan 2019 14:33:09 +0100 [thread overview]
Message-ID: <20190116133309.GO7393@bigcity.dyn.berto.se> (raw)
In-Reply-To: <20190110140213.5198-5-jacopo+renesas@jmondi.org>
Hi Jacopo,
Thanks for your patch.
On 2019-01-10 15:02:11 +0100, Jacopo Mondi wrote:
> The power_up_tx() procedure needs to set a few registers conditionally to
> the selected video source, but it currently checks for the provided tx to
> be either TXA or TXB.
>
> With the introduction of dynamic routing between HDMI and AFE entities to
> TXA, checking which TX the function is operating on is not meaningful anymore.
>
> To fix this, store the subdevice of the source providing video data to the
> CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/media/i2c/adv748x/adv748x-core.c | 2 +-
> drivers/media/i2c/adv748x/adv748x-csi2.c | 13 ++++++++++---
> drivers/media/i2c/adv748x/adv748x.h | 1 +
> 3 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index ad4e6424753a..200e00f93546 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -254,7 +254,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
> adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
>
> /* ADI Required Write */
> - if (is_txa(tx)) {
> + if (tx->src == &state->hdmi.sd) {
> adv748x_write_check(state, page, 0xdb, 0x10, &ret);
> adv748x_write_check(state, page, 0xd6, 0x07, &ret);
> } else {
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 8c3714495e11..353b6b9bf6a7 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -46,9 +46,16 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
> return ret;
> }
>
> - return media_create_pad_link(&src->entity, src_pad,
> - &tx->sd.entity, ADV748X_CSI2_SINK,
> - enable ? MEDIA_LNK_FL_ENABLED : 0);
> + ret = media_create_pad_link(&src->entity, src_pad,
> + &tx->sd.entity, ADV748X_CSI2_SINK,
> + enable ? MEDIA_LNK_FL_ENABLED : 0);
> + if (ret)
> + return ret;
> +
> + if (enable)
> + tx->src = src;
> +
> + return 0;
> }
>
> /* -----------------------------------------------------------------------------
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index ab0c84adbea9..d22270f5e2c1 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -84,6 +84,7 @@ struct adv748x_csi2 {
> struct media_pad pads[ADV748X_CSI2_NR_PADS];
> struct v4l2_ctrl_handler ctrl_hdl;
> struct v4l2_ctrl *pixel_rate;
> + struct v4l2_subdev *src;
> struct v4l2_subdev sd;
> };
>
> --
> 2.20.1
>
--
Regards,
Niklas Söderlund
next prev parent reply other threads:[~2019-01-16 13:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-10 14:02 [PATCH v3 0/6] media: adv748x: Implement dynamic routing support Jacopo Mondi
2019-01-10 14:02 ` [PATCH v3 1/6] media: adv748x: Add is_txb() Jacopo Mondi
2019-01-14 14:47 ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 2/6] media: adv748x: Rename reset procedures Jacopo Mondi
2019-01-14 14:49 ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 3/6] media: adv748x: csi2: Link AFE with TXA and TXB Jacopo Mondi
2019-01-14 14:55 ` Niklas Söderlund
2019-01-16 9:10 ` Jacopo Mondi
2019-01-16 12:28 ` Niklas Söderlund
2019-01-16 13:44 ` Niklas Söderlund
2019-01-28 14:47 ` Jacopo Mondi
2019-02-07 15:57 ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 4/6] media: adv748x: Store the source subdevice in TX Jacopo Mondi
2019-01-16 13:33 ` Niklas Söderlund [this message]
2019-01-10 14:02 ` [PATCH v3 5/6] media: adv748x: Store the TX sink in HDMI/AFE Jacopo Mondi
2019-01-16 13:45 ` Niklas Söderlund
2019-01-10 14:02 ` [PATCH v3 6/6] media: adv748x: Implement TX link_setup callback Jacopo Mondi
2019-01-10 14:36 ` Kieran Bingham
2019-01-16 13:46 ` Niklas Söderlund
2019-01-14 14:22 ` [PATCH v3 0/6] media: adv748x: Implement dynamic routing support Kieran Bingham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190116133309.GO7393@bigcity.dyn.berto.se \
--to=niklas.soderlund@ragnatech.se \
--cc=jacopo+renesas@jmondi.org \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).