From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-i2c@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert@linux-m68k.org>,
Wolfram Sang <wsa+renesas@sang-engineering.com>
Subject: [PATCH] i2c: sh_mobile: use new clock calculation formulas for Gen2
Date: Tue, 5 Feb 2019 18:00:46 +0100 [thread overview]
Message-ID: <20190205170046.5046-1-wsa+renesas@sang-engineering.com> (raw)
We measured the clock on a Lager and an Ebisu board. The new formula
gives better results for both. So after Gen3, switch to this formula for
all Gen2 SoCs.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-sh_mobile.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 3c1552f14bec..6dfe1b3e2a3b 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -802,14 +802,14 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
{ .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
- { .compatible = "renesas,iic-r8a7791", .data = &fast_clock_dt_config },
- { .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
- { .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
- { .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config },
+ { .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },
+ { .compatible = "renesas,iic-r8a7793", .data = &v2_freq_calc_dt_config },
+ { .compatible = "renesas,iic-r8a7794", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a7795", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-r8a77990", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
- { .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
+ { .compatible = "renesas,rcar-gen2-iic", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,rcar-gen3-iic", .data = &v2_freq_calc_dt_config },
{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
{},
--
2.19.1
next reply other threads:[~2019-02-05 17:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-05 17:00 Wolfram Sang [this message]
2019-02-05 19:45 ` [PATCH] i2c: sh_mobile: use new clock calculation formulas for Gen2 Geert Uytterhoeven
2019-02-08 21:30 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190205170046.5046-1-wsa+renesas@sang-engineering.com \
--to=wsa+renesas@sang-engineering.com \
--cc=geert@linux-m68k.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).