From: Phil Edworthy <phil.edworthy@renesas.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>
Cc: Phil Edworthy <phil.edworthy@renesas.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 0/2] irqchip: Add support for Renesas RZ/N1 GPIO interrupt multiplexer
Date: Tue, 19 Feb 2019 15:55:09 +0000 [thread overview]
Message-ID: <20190219155511.28507-1-phil.edworthy@renesas.com> (raw)
On RZ/N1 devices, there are lots of GPIO interrupts that are multiplexed before
getting to the GIC interrupt controller. Other than the multiplexing, there is
no other logic applied to the signals.
The multiplexing cannot be handled dynamically because there is another CPU that
runs firmware. It's likely that the firmware will use some of these GPIO
interrupts and so we don't want them to move around.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
v4:
- Fix DT binding nits
v3:
- Use 'interrupt-map' DT property to map the interrupts, this is very similar
to PCIe MSI. The only difference is that we need to get hold of the interrupt
specifier for the interupts coming into the irqmux.
I had completely messed up the use of 'interrupt-map' in v2... oops.
- Do not use a chained interrupt controller.
v2:
- Split DT bindings into separate patch.
- Use interrupt-map to allow the GPIO controller info to be specified
as part of the irq.
- Don't show status in binding examples.
- Don't show the soc/board split in binding doc.
- Renamed struct and funcs from 'girq' to a more comprehenisble 'irqmux'.
Phil Edworthy (2):
dt-bindings/interrupt-controller: rzn1: Add RZ/N1 gpio irq mux binding
irqchip: Add support for Renesas RZ/N1 GPIO interrupt multiplexer
.../interrupt-controller/renesas,rzn1-mux.txt | 73 +++++++
drivers/irqchip/Kconfig | 9 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/rzn1-irq-mux.c | 205 ++++++++++++++++++
4 files changed, 288 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/renesas,rzn1-mux.txt
create mode 100644 drivers/irqchip/rzn1-irq-mux.c
--
2.17.1
next reply other threads:[~2019-02-19 15:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 15:55 Phil Edworthy [this message]
2019-02-19 15:55 ` [PATCH v4 2/2] irqchip: Add support for Renesas RZ/N1 GPIO interrupt multiplexer Phil Edworthy
2019-02-19 20:28 ` Marc Zyngier
2019-02-20 9:07 ` Phil Edworthy
2019-02-20 10:04 ` Marc Zyngier
2019-02-20 11:33 ` Phil Edworthy
2019-02-25 10:15 ` Phil Edworthy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190219155511.28507-1-phil.edworthy@renesas.com \
--to=phil.edworthy@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert@linux-m68k.org \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).