From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v3 25/31] adv748x: csi2: describe the multiplexed stream
Date: Tue, 5 Mar 2019 19:51:44 +0100 [thread overview]
Message-ID: <20190305185150.20776-26-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20190305185150.20776-1-jacopo+renesas@jmondi.org>
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
The adv748x CSI-2 transmitter can only transmit one stream over the
CSI-2 link, however it can choose which virtual channel is used. This
choice effects the CSI-2 receiver and needs to be captured in the frame
descriptor information, solve this by implementing .get_frame_desc().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
drivers/media/i2c/adv748x/adv748x-csi2.c | 31 +++++++++++++++++++++++-
drivers/media/i2c/adv748x/adv748x.h | 1 +
2 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
index 1abe34183d7d..d8f7cbee86e7 100644
--- a/drivers/media/i2c/adv748x/adv748x-csi2.c
+++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
@@ -226,9 +226,37 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
return ret;
}
+static int adv748x_csi2_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
+ struct v4l2_mbus_framefmt *mbusformat;
+
+ memset(fd, 0, sizeof(*fd));
+
+ if (pad != ADV748X_CSI2_SOURCE)
+ return -EINVAL;
+
+ mbusformat = adv748x_csi2_get_pad_format(sd, NULL, ADV748X_CSI2_SINK,
+ V4L2_SUBDEV_FORMAT_ACTIVE);
+ if (!mbusformat)
+ return -EINVAL;
+
+ fd->entry->stream = tx->vc;
+ fd->entry->bus.csi2.channel = tx->vc;
+ fd->entry->bus.csi2.data_type =
+ adv748x_csi2_code_to_datatype(mbusformat->code);
+
+ fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+ fd->num_entries = 1;
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
.get_fmt = adv748x_csi2_get_format,
.set_fmt = adv748x_csi2_set_format,
+ .get_frame_desc = adv748x_csi2_get_frame_desc,
};
/* -----------------------------------------------------------------------------
@@ -295,7 +323,8 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
return 0;
/* Initialise the virtual channel */
- adv748x_csi2_set_virtual_channel(tx, 0);
+ tx->vc = 0;
+ adv748x_csi2_set_virtual_channel(tx, tx->vc);
adv748x_subdev_init(&tx->sd, state, &adv748x_csi2_ops,
MEDIA_ENT_F_VID_IF_BRIDGE,
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index 5042f9e94aee..4a5a6445604f 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -75,6 +75,7 @@ enum adv748x_csi2_pads {
struct adv748x_csi2 {
struct adv748x_state *state;
+ unsigned int vc;
struct v4l2_mbus_framefmt format;
unsigned int page;
unsigned int port;
--
2.20.1
next prev parent reply other threads:[~2019-03-05 18:52 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-05 18:51 [PATCH v3 00/31] v4l: add support for multiplexed streams Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 01/31] media: entity: Use pad as a starting point for graph walk Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 02/31] media: entity: Use pads instead of entities in the media graph walk stack Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 03/31] media: entity: Walk the graph based on pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 04/31] v4l: mc: Start walk from a specific pad in use count calculation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 05/31] media: entity: Add iterator helper for entity pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 06/31] media: entity: Move the pipeline from entity to pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 07/31] media: entity: Use pad as the starting point for a pipeline Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 08/31] media: entity: Add has_route entity operation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 09/31] media: entity: Add media_has_route() function Jacopo Mondi
2019-03-14 14:45 ` Luca Ceresoli
2019-03-15 9:22 ` Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 10/31] media: entity: Use routing information during graph traversal Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 11/31] media: entity: Skip link validation for pads to which there is no route to Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 12/31] media: entity: Add an iterator helper for connected pads Jacopo Mondi
2019-03-07 10:09 ` Sakari Ailus
2019-03-07 10:27 ` Ian Arkver
2019-03-07 12:38 ` Sakari Ailus
2019-03-07 20:18 ` Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 13/31] media: entity: Add only connected pads to the pipeline Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 14/31] media: entity: Add debug information in graph walk route check Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 15/31] v4l: Add bus type to frame descriptors Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 16/31] v4l: Add CSI-2 bus configuration " Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 17/31] v4l: Add stream to frame descriptor Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 18/31] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 19/31] media: Documentation: Add GS_ROUTING documentation Jacopo Mondi
2019-03-07 15:19 ` Sakari Ailus
2019-03-08 13:31 ` Jacopo Mondi
2019-03-08 14:14 ` Sakari Ailus
2019-03-14 14:44 ` Luca Ceresoli
2019-03-14 14:43 ` Luca Ceresoli
2020-02-13 13:36 ` Hans Verkuil
2019-03-05 18:51 ` [PATCH v3 20/31] v4l: subdev: Take routing information into account in link validation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 21/31] v4l: subdev: Improve link format validation debug messages Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 22/31] v4l: mc: Add an S_ROUTING helper function for power state changes Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 23/31] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 24/31] adv748x: csi2: only allow formats on sink pads Jacopo Mondi
2019-03-05 18:51 ` Jacopo Mondi [this message]
2019-03-05 18:51 ` [PATCH v3 26/31] adv748x: csi2: add internal routing configuration Jacopo Mondi
2019-03-14 14:45 ` Luca Ceresoli
2019-03-15 9:45 ` Jacopo Mondi
2019-03-15 10:06 ` Sakari Ailus
2019-03-16 10:23 ` Luca Ceresoli
2019-03-20 17:14 ` Jacopo Mondi
2019-03-22 16:52 ` Luca Ceresoli
2019-03-28 15:08 ` Jacopo Mondi
2019-03-28 15:17 ` Luca Ceresoli
2019-03-05 18:51 ` [PATCH v3 27/31] adv748x: afe: add routing support Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 28/31] adv748x: afe: Implement has_route() Jacopo Mondi
2019-03-07 12:49 ` Sakari Ailus
2019-03-14 14:45 ` Luca Ceresoli
2019-03-05 18:51 ` [PATCH v3 29/31] rcar-csi2: use frame description information to configure CSI-2 bus Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 30/31] rcar-csi2: expose the subdevice internal routing Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 31/31] media: rcar-csi2: Implement has_route() Jacopo Mondi
2019-03-07 12:56 ` Sakari Ailus
2019-03-07 22:28 ` Jacopo Mondi
2019-03-07 9:47 ` [PATCH v3 00/31] v4l: add support for multiplexed streams Sakari Ailus
2019-03-08 13:19 ` Jacopo Mondi
2019-03-08 14:12 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190305185150.20776-26-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).