From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] pinctrl: sh-pfc: r8a77970: Remove MMC_{CD,WP}
Date: Fri, 3 May 2019 13:43:04 +0200 [thread overview]
Message-ID: <20190503114304.20412-1-geert+renesas@glider.be> (raw)
Hardware Manual Errata for rev. 15.0 of March 26, 2019 removed the bit
definitions for MMC_CD and MMC_WP in the documentation for the IPSR6
register, as these pin functionalities do not exist on R-Car V3M.
Remove the definitions, and the corrresponding pins and groups.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in sh-pfc-for-v5.3.
drivers/pinctrl/sh-pfc/pfc-r8a77970.c | 24 ++----------------------
1 file changed, 2 insertions(+), 22 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c
index 8473a83bd4ca6570..25e27b6bee89366f 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c
@@ -205,8 +205,8 @@
#define IP6_19_16 FM(VI1_DATA8) F_(0, 0) FM(CTS4_N) FM(D11) FM(MMC_D5) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP6_23_20 FM(VI1_DATA9) F_(0, 0) FM(RTS4_N) FM(D12) FM(MMC_D6) FM(SCL3_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP6_27_24 FM(VI1_DATA10) F_(0, 0) F_(0, 0) FM(D13) FM(MMC_D7) FM(SDA3_B) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP6_31_28 FM(VI1_DATA11) FM(SCL4) FM(IRQ4) FM(D14) FM(MMC_WP) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
-#define IP7_3_0 FM(VI1_FIELD) FM(SDA4) FM(IRQ5) FM(D15) FM(MMC_CD) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP6_31_28 FM(VI1_DATA11) FM(SCL4) FM(IRQ4) FM(D14) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
+#define IP7_3_0 FM(VI1_FIELD) FM(SDA4) FM(IRQ5) FM(D15) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP7_7_4 FM(SCL0) FM(DU_DR0) FM(TPU0TO0) FM(CLKOUT) F_(0, 0) FM(MSIOF0_RXD) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP7_11_8 FM(SDA0) FM(DU_DR1) FM(TPU0TO1) FM(BS_N) FM(SCK0) FM(MSIOF0_TXD) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
#define IP7_15_12 FM(SCL1) FM(DU_DG0) FM(TPU0TO2) FM(RD_N) FM(CTS0_N) FM(MSIOF0_SCK) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0) F_(0, 0)
@@ -631,14 +631,12 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP6_31_28, SCL4),
PINMUX_IPSR_GPSR(IP6_31_28, IRQ4),
PINMUX_IPSR_GPSR(IP6_31_28, D14),
- PINMUX_IPSR_GPSR(IP6_31_28, MMC_WP),
/* IPSR7 */
PINMUX_IPSR_GPSR(IP7_3_0, VI1_FIELD),
PINMUX_IPSR_GPSR(IP7_3_0, SDA4),
PINMUX_IPSR_GPSR(IP7_3_0, IRQ5),
PINMUX_IPSR_GPSR(IP7_3_0, D15),
- PINMUX_IPSR_GPSR(IP7_3_0, MMC_CD),
PINMUX_IPSR_GPSR(IP7_7_4, SCL0),
PINMUX_IPSR_GPSR(IP7_7_4, DU_DR0),
@@ -1121,20 +1119,6 @@ static const unsigned int mmc_ctrl_pins[] = {
static const unsigned int mmc_ctrl_mux[] = {
MMC_CLK_MARK, MMC_CMD_MARK,
};
-static const unsigned int mmc_cd_pins[] = {
- /* CD */
- RCAR_GP_PIN(3, 16),
-};
-static const unsigned int mmc_cd_mux[] = {
- MMC_CD_MARK,
-};
-static const unsigned int mmc_wp_pins[] = {
- /* WP */
- RCAR_GP_PIN(3, 15),
-};
-static const unsigned int mmc_wp_mux[] = {
- MMC_WP_MARK,
-};
/* - MSIOF0 ----------------------------------------------------------------- */
static const unsigned int msiof0_clk_pins[] = {
@@ -1726,8 +1710,6 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(mmc_data4),
SH_PFC_PIN_GROUP(mmc_data8),
SH_PFC_PIN_GROUP(mmc_ctrl),
- SH_PFC_PIN_GROUP(mmc_cd),
- SH_PFC_PIN_GROUP(mmc_wp),
SH_PFC_PIN_GROUP(msiof0_clk),
SH_PFC_PIN_GROUP(msiof0_sync),
SH_PFC_PIN_GROUP(msiof0_ss1),
@@ -1897,8 +1879,6 @@ static const char * const mmc_groups[] = {
"mmc_data4",
"mmc_data8",
"mmc_ctrl",
- "mmc_cd",
- "mmc_wp",
};
static const char * const msiof0_groups[] = {
--
2.17.1
next reply other threads:[~2019-05-03 11:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-03 11:43 Geert Uytterhoeven [this message]
2019-05-06 18:45 ` [PATCH] pinctrl: sh-pfc: r8a77970: Remove MMC_{CD,WP} Sergei Shtylyov
2019-05-07 7:27 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190503114304.20412-1-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).