From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: linux-renesas-soc@vger.kernel.org,
VenkataRajesh.Kalakodima@in.bosch.com,
Harsha.ManjulaMallikarjun@in.bosch.com,
Jacopo Mondi <jacopo@jmondi.org>
Subject: Re: [RFC 4/9] drm: rcar-du: kms: Create CMM instances
Date: Sat, 11 May 2019 21:56:42 +0300 [thread overview]
Message-ID: <20190511185642.GI13043@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20190508173428.22054-5-jacopo+renesas@jmondi.org>
Hi Jacopo,
Thank you for the patch.
On Wed, May 08, 2019 at 07:34:23PM +0200, Jacopo Mondi wrote:
> Implement device tree parsing to collect the available CMM units and
> store them in the group to be later enabled at start up time.
>
> Define a new feature to let each SoC claim support for CMM.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> drivers/gpu/drm/rcar-du/rcar_du_drv.h | 4 ++
> drivers/gpu/drm/rcar-du/rcar_du_group.h | 2 +
> drivers/gpu/drm/rcar-du/rcar_du_kms.c | 68 +++++++++++++++++++++++++
> 3 files changed, 74 insertions(+)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> index 1327cd0df90a..aac916a7a46c 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h
> @@ -13,6 +13,7 @@
> #include <linux/kernel.h>
> #include <linux/wait.h>
>
> +#include "rcar_du_cmm.h"
> #include "rcar_du_crtc.h"
> #include "rcar_du_group.h"
> #include "rcar_du_vsp.h"
> @@ -28,6 +29,7 @@ struct rcar_du_encoder;
> #define RCAR_DU_FEATURE_VSP1_SOURCE BIT(1) /* Has inputs from VSP1 */
> #define RCAR_DU_FEATURE_INTERLACED BIT(2) /* HW supports interlaced */
> #define RCAR_DU_FEATURE_TVM_SYNC BIT(3) /* Has TV switch/sync modes */
> +#define RCAR_DU_FEATURE_CMM BIT(4) /* Has CCM */
>
> #define RCAR_DU_QUIRK_ALIGN_128B BIT(0) /* Align pitches to 128 bytes */
>
> @@ -69,6 +71,7 @@ struct rcar_du_device_info {
>
> #define RCAR_DU_MAX_CRTCS 4
> #define RCAR_DU_MAX_GROUPS DIV_ROUND_UP(RCAR_DU_MAX_CRTCS, 2)
> +#define RCAR_DU_MAX_CMMS 4
> #define RCAR_DU_MAX_VSPS 4
>
> struct rcar_du_device {
> @@ -85,6 +88,7 @@ struct rcar_du_device {
> struct rcar_du_encoder *encoders[RCAR_DU_OUTPUT_MAX];
>
> struct rcar_du_group groups[RCAR_DU_MAX_GROUPS];
> + struct rcar_du_cmm cmms[RCAR_DU_MAX_CMMS];
> struct rcar_du_vsp vsps[RCAR_DU_MAX_VSPS];
>
> struct {
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_group.h b/drivers/gpu/drm/rcar-du/rcar_du_group.h
> index 87950c1f6a52..b0c1466593a3 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_group.h
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_group.h
> @@ -22,6 +22,7 @@ struct rcar_du_device;
> * @mmio_offset: registers offset in the device memory map
> * @index: group index
> * @channels_mask: bitmask of populated DU channels in this group
> + * @cmms_mask: bitmask of enabled CMMs in this group
> * @num_crtcs: number of CRTCs in this group (1 or 2)
> * @use_count: number of users of the group (rcar_du_group_(get|put))
> * @used_crtcs: number of CRTCs currently in use
> @@ -37,6 +38,7 @@ struct rcar_du_group {
> unsigned int index;
>
> unsigned int channels_mask;
> + unsigned int cmms_mask;
> unsigned int num_crtcs;
> unsigned int use_count;
> unsigned int used_crtcs;
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> index adbc4f5d8fc5..684a60feac5c 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
> @@ -614,6 +614,64 @@ static int rcar_du_vsps_init(struct rcar_du_device *rcdu)
> return ret;
> }
>
> +static int rcar_du_cmm_init(struct rcar_du_device *rcdu)
> +{
> + const struct device_node *np = rcdu->dev->of_node;
> + unsigned int cells;
> + unsigned int i;
> + int ret;
> +
> + /*
> + * Make sure the DT 'cmms' property is well formed and populate
> + * the list of enabled CMM.
> + */
> + cells = of_property_count_u32_elems(np, "cmms");
> + if (cells % 2 || cells > rcdu->num_crtcs * 2) {
> + dev_err(rcdu->dev, "invalid 'cmms' property format\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < cells / 2; ++i) {
> + struct of_phandle_args args;
> + struct rcar_du_group *rgrp;
> + unsigned int crtc;
> +
> + ret = of_parse_phandle_with_fixed_args(np, "cmms", 1, i,
> + &args);
> + if (ret < 0) {
> + dev_err(rcdu->dev, "failed to parse 'cmms' property\n");
> + goto error;
> + }
> +
> + crtc = args.args[0];
> + if (crtc >= rcdu->num_crtcs ||
> + !(rcdu->info->channels_mask & BIT(crtc))) {
> + dev_err(rcdu->dev,
> + "invalid DU channel %u in 'cmms' property\n",
> + crtc);
> + goto error;
> + }
> +
> + rcdu->cmms[i].np = args.np;
How about storing the struct device pointer instead (using
of_find_device_by_node()) ? You should add a rcar_cmm_init() function to
the CMM API, similar to vsp1_du_init().
> + rcdu->cmms[i].crtc = crtc;
> +
> + /*
> + * CMMs are activated by the DU group: store the active CMMs
> + * indexes in the group.
> + */
> + rgrp = &rcdu->groups[crtc / 2];
> + rgrp->cmms_mask |= BIT(crtc % 2);
> + }
I think you can simplify this by dropping the index from renesas,cmms.
You can simply loop over the CRTCs and get the phandle corresponding to
the CRTC index.
> +
> + return 0;
> +
> +error:
> + for (; i > 0; --i)
> + of_node_put(rcdu->cmms[i - 1].np);
> +
> + return ret;
> +}
> +
> int rcar_du_modeset_init(struct rcar_du_device *rcdu)
> {
> static const unsigned int mmio_offsets[] = {
> @@ -680,6 +738,9 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
> & GENMASK(1, 0);
> rgrp->num_crtcs = hweight8(rgrp->channels_mask);
>
> + /* The active CMMs mask will be later populated. */
> + rgrp->cmms_mask = 0;
> +
The structures are initialised to 0 when allocated so this isn't
strictly required.
> /*
> * If we have more than one CRTCs in this group pre-associate
> * the low-order planes with CRTC 0 and the high-order planes
> @@ -704,6 +765,13 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
> return ret;
> }
>
> + /* Initialize the Color Management Modules. */
> + if (rcar_du_has(rcdu, RCAR_DU_FEATURE_CMM)) {
> + ret = rcar_du_cmm_init(rcdu);
> + if (ret < 0)
> + return ret;
> + }
> +
> /* Create the CRTCs. */
> for (swindex = 0, hwindex = 0; swindex < rcdu->num_crtcs; ++hwindex) {
> struct rcar_du_group *rgrp;
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2019-05-11 18:57 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-08 17:34 [RFC 0/9] drm: rcar-du: Add CMM support to M3-W (plumbing only) Jacopo Mondi
2019-05-08 17:34 ` [RFC 1/9] dt-bindings: display: renesas,cmm: Add R-Car CMM documentation Jacopo Mondi
2019-05-11 18:16 ` Laurent Pinchart
2019-05-28 12:37 ` Jacopo Mondi
2019-05-28 14:25 ` Laurent Pinchart
2019-05-28 14:50 ` Geert Uytterhoeven
2019-05-08 17:34 ` [RFC 2/9] dt-bindings: display, renesas,du: Document cmms property Jacopo Mondi
2019-05-11 18:23 ` Laurent Pinchart
2019-05-15 14:12 ` Jacopo Mondi
2019-05-16 10:40 ` Laurent Pinchart
2019-05-08 17:34 ` [RFC 3/9] [TODO] drm: rcar-du: Add basic support for CMM Jacopo Mondi
2019-05-11 18:45 ` Laurent Pinchart
2019-05-08 17:34 ` [RFC 4/9] drm: rcar-du: kms: Create CMM instances Jacopo Mondi
2019-05-11 18:56 ` Laurent Pinchart [this message]
2019-05-08 17:34 ` [RFC 5/9] drm: rcar-du: Add CMM support for M3-W Jacopo Mondi
2019-05-11 18:47 ` Laurent Pinchart
2019-05-08 17:34 ` [RFC 6/9] drm: rcar-du: crtc: Setup the CMM Jacopo Mondi
2019-05-11 18:59 ` Laurent Pinchart
2019-05-08 17:34 ` [RFC 7/9] drm: rcar-du: group: Enable CMM unit Jacopo Mondi
2019-05-11 19:02 ` Laurent Pinchart
2019-05-08 17:34 ` [RFC 8/9] clk: renesas: r8a7796: Add CMM clocks Jacopo Mondi
2019-05-09 9:12 ` Geert Uytterhoeven
2019-05-11 18:21 ` Laurent Pinchart
2019-05-21 8:47 ` Geert Uytterhoeven
2019-05-08 17:34 ` [RFC 9/9] arm64: dts: renesas: r8a7796: Add CMM units Jacopo Mondi
2019-05-11 18:25 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190511185642.GI13043@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=Harsha.ManjulaMallikarjun@in.bosch.com \
--cc=VenkataRajesh.Kalakodima@in.bosch.com \
--cc=jacopo+renesas@jmondi.org \
--cc=jacopo@jmondi.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).