Linux-Renesas-SoC Archive on lore.kernel.org
 help / color / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/3] media: vsp1: drm: Remove vsp1_du_setup_lif()
Date: Wed, 12 Jun 2019 17:45:00 +0300
Message-ID: <20190612144500.GP5035@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20190517223143.26251-4-kieran.bingham+renesas@ideasonboard.com>

Hi Kieran,

Thank you for the patch.

On Fri, May 17, 2019 at 11:31:43PM +0100, Kieran Bingham wrote:
> The vsp1_du_setup_lif() function is deprecated, and the users have been
> removed. Remove the implementation and the associated configuration
> structure.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/platform/vsp1/vsp1_drm.c | 47 --------------------------
>  include/media/vsp1.h                   | 22 ------------
>  2 files changed, 69 deletions(-)
> 
> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
> index ce5c0780680f..12f76344bdec 100644
> --- a/drivers/media/platform/vsp1/vsp1_drm.c
> +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> @@ -817,53 +817,6 @@ int vsp1_du_atomic_disable(struct device *dev, unsigned int pipe_index)
>  }
>  EXPORT_SYMBOL_GPL(vsp1_du_atomic_disable);
>  
> -/**
> - * vsp1_du_setup_lif - Setup the output part of the VSP pipeline
> - * @dev: the VSP device
> - * @pipe_index: the DRM pipeline index
> - * @cfg: the LIF configuration
> - *
> - * Configure the output part of VSP DRM pipeline for the given frame @cfg.width
> - * and @cfg.height. This sets up formats on the BRx source pad, the WPF sink and
> - * source pads, and the LIF sink pad.
> - *
> - * The @pipe_index argument selects which DRM pipeline to setup. The number of
> - * available pipelines depend on the VSP instance.
> - *
> - * As the media bus code on the blend unit source pad is conditioned by the
> - * configuration of its sink 0 pad, we also set up the formats on all blend unit
> - * sinks, even if the configuration will be overwritten later by
> - * vsp1_du_setup_rpf(). This ensures that the blend unit configuration is set to
> - * a well defined state.
> - *
> - * Return 0 on success or a negative error code on failure.
> - */
> -int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> -		      const struct vsp1_du_lif_config *cfg)
> -{
> -	int ret;
> -
> -	struct vsp1_du_modeset_config modes = {
> -		.width = cfg->width,
> -		.height = cfg->height,
> -		.interlaced = cfg->interlaced,
> -	};
> -	struct vsp1_du_enable_config enable = {
> -		.callback = cfg->callback,
> -		.callback_data = cfg->callback_data,
> -	};
> -
> -	if (!cfg)
> -		return vsp1_du_atomic_disable(dev, pipe_index);
> -
> -	ret = vsp1_du_atomic_modeset(dev, pipe_index, &modes);
> -	if (ret)
> -		return ret;
> -
> -	return vsp1_du_atomic_enable(dev, pipe_index, &enable);
> -}
> -EXPORT_SYMBOL_GPL(vsp1_du_setup_lif);
> -
>  /**
>   * vsp1_du_atomic_begin - Prepare for an atomic update
>   * @dev: the VSP device
> diff --git a/include/media/vsp1.h b/include/media/vsp1.h
> index 13f5a1c4d45a..bc0a26d33d9a 100644
> --- a/include/media/vsp1.h
> +++ b/include/media/vsp1.h
> @@ -20,28 +20,6 @@ int vsp1_du_init(struct device *dev);
>  #define VSP1_DU_STATUS_COMPLETE		BIT(0)
>  #define VSP1_DU_STATUS_WRITEBACK	BIT(1)
>  
> -/**
> - * struct vsp1_du_lif_config - VSP LIF configuration - Deprecated
> - * @width: output frame width
> - * @height: output frame height
> - * @interlaced: true for interlaced pipelines
> - * @callback: frame completion callback function (optional). When a callback
> - *	      is provided, the VSP driver guarantees that it will be called once
> - *	      and only once for each vsp1_du_atomic_flush() call.
> - * @callback_data: data to be passed to the frame completion callback
> - */
> -struct vsp1_du_lif_config {
> -	unsigned int width;
> -	unsigned int height;
> -	bool interlaced;
> -
> -	void (*callback)(void *data, unsigned int status, u32 crc);
> -	void *callback_data;
> -};
> -
> -int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
> -		      const struct vsp1_du_lif_config *cfg);
> -
>  /**
>   * struct vsp1_du_modeset_config - VSP LIF Mode configuration
>   * @width: output frame width

-- 
Regards,

Laurent Pinchart

      reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-17 22:31 [RFC PATCH 0/3] VSP1/DU atomic interface changes Kieran Bingham
2019-05-17 22:31 ` [PATCH 1/3] media: vsp1: drm: Split vsp1_du_setup_lif() Kieran Bingham
2019-06-12 14:42   ` Laurent Pinchart
2019-05-17 22:31 ` [PATCH 2/3] drm: rcar-du: Convert to the new VSP atomic API Kieran Bingham
2019-06-12 14:44   ` Laurent Pinchart
2019-05-17 22:31 ` [PATCH 3/3] media: vsp1: drm: Remove vsp1_du_setup_lif() Kieran Bingham
2019-06-12 14:45   ` Laurent Pinchart [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190612144500.GP5035@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Renesas-SoC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-renesas-soc/0 linux-renesas-soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-renesas-soc linux-renesas-soc/ https://lore.kernel.org/linux-renesas-soc \
		linux-renesas-soc@vger.kernel.org linux-renesas-soc@archiver.kernel.org
	public-inbox-index linux-renesas-soc


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-renesas-soc


AGPL code for this site: git clone https://public-inbox.org/ public-inbox